Buckinghamshire · England
Bath re-enamelling & resurfacing in Burcott, Buckinghamshire
Our technicians come to Burcott for full bath re-enamelling and resurfacing. Nothing is taken out, and the work is guaranteed.
- Resurfacing from £350
- A period or roll-top bath worth keeping
- A coating lifting around the plughole
How we handle bath re-enamelling in Burcott
After re-enamelling, the bath has a smooth, glossy, new-looking surface, without any of the disruption of replacing it. It’s ideal if you like your bathroom but not the state of the bath. We work on Victorian roll-tops, basins & shower trays and acrylic baths, and the jobs we see most are an original cast iron bath that needs restoring and several chips and rust patches.
Peace of mind is built in: our one-year guarantee applies to every job, and we explain what it covers before booking.
- Location
- Burcott (HP22)
- County
- Buckinghamshire
- Warranty
- A year, on every repair
- Quote
- From £350. Free and fixed, from your photos
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
Covering Burcott
Burcott is about 2 miles north-east of Aylesbury, in Buckinghamshire. Book a date that suits you, and you will know when to expect us, so you are not left waiting in all day. Burcott is one of 263 towns and villages in Buckinghamshire we cover. Our nearest city page is London, about 37 miles away.
Our visits in HP22 are booked in the same way as anywhere else. You’ll find streets such as Burcott Lane and Marshalls Lea, all of which we cover. We also cover the places around Burcott: Bierton (1 mile north-west), Broughton (1 mile south-east), Broughton Crossing (1 mile south-west), Turnfurlong (2 miles south-west) and Bedgrove (2 miles south). We also work in nearby towns such as High Wycombe (14 miles south), Chesham (11 miles south-east), Buckingham (15 miles north-west), Amersham (13 miles south-east), Princes Risborough (8 miles south) and Haydon Hill (3 miles west).
Local landmarks in Burcott
Around Burcott, we work in homes near Stocklake Park Community School, Church of St James and Bierton Church of England Combined School, among other places. Nearby too are The Bell pub (within half a mile north) and Aylesbury Grammar School (1.4 miles south-west). Burcott’s nearest station is Aylesbury station, roughly 1.9 miles south-west. Further afield, we also cover the area around Tindal Centre (1.1 miles west) and Friars Square (1.8 miles south-west). Green spaces nearby include Haddington Hill.
Repairs by material
Cast iron
Cast iron baths are the classic candidate for re-enamelling. The body lasts for generations; only the enamel wears, so resurfacing gives them a new life.
Acrylic
We resurface acrylic baths as well, with a coating system suited to acrylic. It must be solid and not flex underfoot for the finish to last.
FAQs for Burcott
What areas do you cover?
Across the UK. Our prices are the same everywhere.
Do you need to take the bath out?
Not at all. We work on the bath in place, with the room masked and ventilated.
What happens after I send pictures?
You’ll get a fixed quote back. You are under no obligation.
Can I get a quote without a visit?
In nearly every case. We only ask to see it in person if the pictures cannot show what we need.
Is the work guaranteed?
All our work carries our one-year guarantee. We will explain what it covers when we quote.
Can landlords book you?
Yes. We work for landlords, agents, builders and businesses as well as householders in Burcott.
Can you fix a peeling bath coating?
Yes. Removing the old finish takes extra time, which we include in the price.
Do you come to Burcott?
Yes. We work across the UK and come to Burcott. Send us photos for a fixed quote, or call 0345 017 0787.
Should I try a DIY kit first?
Kits are cheap and easy to find, but the repairs we redo most often are DIY ones that have discoloured or lifted. Getting it right first time is normally cheaper.
For a hairline mark somewhere you’ll never see, a kit may be enough. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, it’s worth having it done properly.
How it works
On the day, the technician arrives at the agreed time, protects the room with dust sheets and masking and gets started. The job normally takes most of the day. We clean up when we’re done and tell you when it’s ready to use.
- We sheet, mask and ventilate the room.
- We remove the old silicone and deep clean the bath.
- We repair chips, rust spots and pitting.
- The surface is keyed and primed for the new finish.
- Several coats of finish are sprayed on, then it cures.
How to prepare
- Move bottles, mats and clutter away from the area
- Plan for the room to be out of bounds to pets and children
- Ensure the room can be ventilated
Ask for a price
For most jobs, pictures are all we need to give you a price. Add a line about what happened and your postcode, and we’ll send back a fixed quote and some dates.
Advice
How to care for the repair
A little care keeps the finish looking good. We recommend:
- Get any chip repaired quickly
- Fix dripping taps quickly
- Keep suction mats out of the bath
- Wipe the bath dry after use in hard water areas
A quick rinse and wipe after use helps, particularly where water is hard, to stop limescale building up.
The longer worn enamel is left, the rougher it gets, and rust spots spread under the surface. Resurfacing sooner means less repair work first.
What affects the price in Burcott
Resurfacing from £350. There are no hourly rates or hidden extras. The price depends on:
- What the surface is made of
- Whether it’s a chip, crack, burn or wear
- Where the damage is and how we get to it
- How hard the colour is to match
The price depends on how much damage there is and what kind, what it’s made of and how many jobs we combine into one visit. We give a fixed quote from your photos, so there are no surprises on the day.
Getting a price from pictures
Good photos mean an accurate price. Here’s what helps:
- A coin beside the damage so we can judge size
- Details of any past repairs
- One picture of the entire bath
- One sharp close-up of the damage
To get a price, send two or three pictures through our quote form or ring us. We will say straight away whether it can be repaired.
When to call us in Burcott
Enamel wears gradually. Abrasive cleaners, limescale and years of use wear the gloss away, typically first under the taps and around the waste.
People usually call us when they notice something like this:
- A peeling or bubbling previous coating
- A bath that stays dull however much you clean it
- Chips and rust in more than one place
- A bath in a colour that no longer suits
What your quote should include
- Whether a trained technician does the job
- What preparation is included
- When it can be used again
- What protection goes down before work starts
Landlords, agents and businesses in Burcott
We are used to working with agents and managing companies. Send the address, photos and access details and we’ll handle the rest.
Rented homes see more wear and tear, and replacing items every time a tenant leaves is expensive. A repair between tenancies is a cheaper way to keep the property in good order.
More services for Burcott
Honest limits
Not everything can be repaired, and we’d rather say so up front. We can’t fix:
- Holes rusted through the metal
- Acrylic that moves when you stand in it
- Problems we can’t see until an old finish comes off
Not sure? Send pictures and we will give you a straight answer before booking.
Surfaces we repair
- Acrylic baths
- Pressed steel baths
- Cast iron baths
- Victorian roll-tops
- Basins & shower trays
About our accreditations · Every repair comes with a one-year guarantee.
