Buckinghamshire · England
Bath re-enamelling & resurfacing in Broughton Crossing, Buckinghamshire
Bath re-enamelling across Broughton Crossing and nearby, done in a single visit in most cases.
- Resurfacing from £350
- Chips and rust in more than one place
- A period or roll-top bath worth keeping
Bath re-enamelling in Broughton Crossing without replacing anything
We don’t move the bath, so the taps, tiles and plumbing are not touched. It generally takes one visit, with the bath ready to use the following day. Whether it’s stains that won’t shift and an old resurfacing that’s failing, we can help, on basins & shower trays, cast iron baths and Victorian roll-tops alike.
You get a one-year guarantee, the same in Broughton Crossing as everywhere else we work.
- Where
- Broughton Crossing (HP22, HP20)
- County
- Buckinghamshire
- Warranty
- One year on every repair
- Price
- From £350. Free and fixed, from your photos
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
Covering Broughton Crossing
Broughton Crossing is about 1 mile east of Elmhurst, in Buckinghamshire. From the centre of Broughton Crossing to the outlying streets, we offer exactly the same service: fixed prices, tidy work and a one-year guarantee. Our repair technicians cover 263 places in Buckinghamshire. You can also see our page for London, about 37 miles away.
Our visits in HP22 and HP20 are booked in the same way as anywhere else. Streets in the area include Erle Road, Chaff Road and Bobby Road, all of which we cover. Neighbouring places we cover include Burcott (1 mile north-east), Broughton (1 mile east), Bierton (1 mile north), Turnfurlong (1 mile south-west) and Bedgrove (1 mile south). Further out, we also cover High Wycombe (14 miles south), Chesham (11 miles south-east), Buckingham (15 miles north-west), Amersham (13 miles south-east), Princes Risborough (7 miles south) and Haydon Hill (3 miles west).
What’s near Broughton Crossing
We visit homes around Stocklake Park Community School, Aylesbury Grammar School and Bierton Church of England Combined School and the streets around them. Also close by are The Dog House (within half a mile north-east) and Church of St James (under half a mile north). The nearest railway station is Aylesbury station, roughly 1.5 miles south-west. A little further out are Friars Square (1.4 miles south-west) and Roald Dahl Children's Gallery (1.4 miles west). Open spaces near Broughton Crossing include Haddington Hill and Dancersend Nature Reserve.
Should you replace it?
A replacement frequently means several trades over several days. Re-enamelling is one technician, typically one day, with the bath back in use the following day. Our bath re-enamelling starts from £350. Compared with replacing, repairing usually costs far less, because nothing has to be taken out, refitted or made good. Your fixed quote shows exactly what’s included.
What you get with us
- Same prices wherever you are
- We leave the room as we found it
- Work done at your home or business
- A year’s guarantee on all work
Take a look at our prices page and guide to resurfacing and replacement costs.
Broughton Crossing questions
Is the work guaranteed?
Every repair comes with a one-year guarantee. We will explain what it covers when we quote.
Can you redo someone else’s repair?
Usually, yes. We remove the old repair before doing a new one, so let us know about it.
Will you leave a mess?
Very little mess: we sheet and mask everything nearby, and we take our waste away with us.
Can you fix a peeling bath coating?
Yes, we do this regularly. Removing the old finish takes extra time, which we include in the price.
Do you work for landlords and businesses?
We do, regularly. We quote for multiple addresses and fit around tenancy changeovers.
Do you need to take the bath out?
No. It’s re-enamelled where it stands, so the tiles and taps stay put.
What does bath re-enamelling cost?
Resurfacing from £350. The exact price depends on the damage, so we quote from pictures. You know the full cost before anything is booked.
What if the damage is worse than the photos show?
We will show you and explain before doing anything extra. Nothing extra is done without your say-so.
Other services in Broughton Crossing
Landlord and trade work in Broughton Crossing
We regularly work with letting and managing agents. Just send photos, the address and how to get access and we will handle the rest.
Builders, developers and site managers book us for snagging repairs, fixing chips and scratches before handover. We hold CHAS, Constructionline and SafeContractor accreditations.
Looking after it afterwards
To keep it looking its best:
- Dry the bath after use to stop limescale
- Never use suction bath mats
- Wash away dyes and oils after use
- Fix dripping taps quickly
Dry the bath after use if possible, especially in hard water areas, and rinse off any bath products.
Don’t try to scrub a worn bath back to shine. It removes more of the surface.
The process
Your technician turns up when we said we would, introduces themselves and checks the damage against your pictures first. Dust sheets and masking tape go down before we open a single tin. Most visits take the best part of a day, and the room is left clean and tidy.
- The bathroom is protected and ventilation set up.
- We remove the old silicone and deep clean the bath.
- We repair chips, rust spots and pitting.
- The surface is keyed and primed for the new finish.
- Several coats of finish are sprayed on, then it cures.
Before we arrive
- Keep children and pets away from the room on the day
- Move bottles, mats and clutter away from the area
- Have a window or extractor fan available
How to get a price
The quickest way to a price is to send two or three pictures through our quote form or call us. We’ll tell you honestly whether it can be repaired.
Advice
Different materials, different repairs
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Once a chip exposes it, rust follows quickly, so we treat and seal the metal before filling.
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. The enamel is the part that wears or chips, and that’s what we repair.
DIY repairs versus a professional job
A DIY attempt isn’t a disaster. We take the old repair out and do it properly, so it will not stop us repairing it. Just mention it when you send photos, as it can add time.
The difference between a kit and a professional repair is mostly in the preparation and colour. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, then guarantee it for a year.
How we price bath re-enamelling
Resurfacing from £350. Prices are worked out job by job. The main factors are:
- Where the damage is and how we get to it
- How much damage there is
- Unusual colours or finishes
- Doing more than one item at once
The price depends on how much damage there is and what kind, the material and how many items we do on one visit. You get a fixed quote from your pictures, so there are no surprises on the day.
Quotes from your photos
Phone photos are fine, there’s no need for anything special. Just ensure we can see:
- The material, if you know it
- Any earlier repairs or coatings
- Good light, ideally daylight, without flash glare
- Where you are, by postcode
A quote takes minutes to ask for: photograph the damage, then the whole bath, include your postcode and send them over. You will get a fixed quote, not an estimate.
When a repair isn’t the answer
It helps to know what we cannot do:
- Anything hidden under an old coating, until we remove it
- Holes rusted through the metal
- A cast iron or steel bath that’s cracked right through
Send us pictures and we’ll tell you honestly.
Materials we work on in Broughton Crossing
- Basins & shower trays
- Acrylic baths
- Pressed steel baths
- Victorian roll-tops
- Cast iron baths
About our accreditations · Every repair comes with a one-year guarantee.
