Cumbria · England
Bath Re-enamelling in Burnrigg
Bath re-enamelling in Burnrigg without the cost of replacing. Send us pictures for a fixed quote, then we come to you.
- Resurfacing from £350
- Worn patches where water runs and sits
- A period or roll-top bath worth keeping
Burnrigg questions
Do you come to Burnrigg?
Yes, we do. We send a technician to Burnrigg for every job, and the price is the same as everywhere else.
What information do you need?
Send pictures through the quote form or call 0345 017 0787.
Do you do work for letting agents?
Yes, often. We can quote for several properties together and work between tenancies.
When can you do it?
Your quote comes with available dates. Tell us if you need it done quickly.
Can you make a coloured bath white?
Yes. We can resurface a coloured bath in white, and the basin and toilet can be done too.
Can you re-enamel a roll-top bath?
Yes, frequently. We resurface the inside, and the outside can be refinished too.
How long is the bath unusable?
One day for most baths, ready the day after. We’ll confirm timings when we quote.
Are you a vetted contractor?
We’re accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.
How we handle bath re-enamelling in Burnrigg
When a bath is structurally fine but worn out on the surface, resurfacing is normally the best value. It avoids removal, plumbing and re-tiling. Common call-outs are for a period or roll-top bath worth keeping and a bath that stays dull however much you clean it, across Victorian roll-tops, pressed steel baths and basins & shower trays.
The work is guaranteed for twelve months. If there is a problem with the repair within the year, we return and sort it.
- Where
- Burnrigg (CA4)
- Region
- Cumbria
- Warranty
- One year on every repair
- Quotes
- From £350. Free, fixed price from pictures
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
Looking after it afterwards
It’s all simple stuff:
- Do not leave a chip unrepaired
- Keep toiletries on a shelf rather than in the bath
- Wash away dyes and oils after use
- Clean with a soft cloth and mild detergent
Wait for the curing time we give you before the first bath. Then, gentle cleaning with a soft cloth is enough.
The longer worn enamel is left, the rougher it gets, and any rust spreads underneath. Acting earlier keeps the preparation simpler.
Repair or replace in Burnrigg?
If you like your bathroom but not your bath’s surface, re-enamelling is the least disruptive fix. Tiles, panels and taps stay put. Our bath re-enamelling starts from £350. A repair is priced on what needs doing, not where you live. You will see the full price before you book, with no extras added later.
Why book with us
- Rooms protected and left tidy
- Technicians who travel to you, UK-wide
- Straight answers about what a repair can do
- CHAS, Constructionline and SafeContractor accredited
Read our prices page or bath cost comparison.
When a repair isn’t the answer
A repair isn’t always the answer, and we’d rather say so up front. Repairs will not solve:
- Anything hidden under an old coating, until we remove it
- A metal bath with a through crack
- Steel that has corroded right through
Not sure? Send pictures and we’ll give you a straight answer before you book.
Materials we repair
- Basins & shower trays
- Victorian roll-tops
- Pressed steel baths
- Acrylic baths
- Cast iron baths
DIY repairs versus a professional job
For a hairline mark somewhere you’ll never see, a kit may be enough. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, it’s worth having it done properly.
The difference between a kit and a professional repair is mostly in the preparation and colour. We prepare the area properly, mix the colour on site and polish the finish to match, then guarantee it for a year.
For landlords and businesses
We regularly work with letting and managing agents. Just send photos, the address and how to get access and we’ll arrange it.
We regularly price jobs from inventory or check-out photos. You can have a price before you arrange access, and we liaise with tenants about access if you’d like us to.
The process
We work cleanly and quietly, so you can carry on at home. We protect the area first, then the work takes the best part of a day. Before we leave, we explain how soon it can be used and how to look after it.
- The bathroom is protected and ventilation set up.
- We remove the old silicone and deep clean the bath.
- Chips, rust and pitting are repaired.
- The surface is keyed and primed for the new finish.
- The new finish is sprayed on in several coats and left to cure until the following day.
Getting ready for the visit
- Clear the area around the damage
- Have somewhere for us to park nearby if possible
- Let us know if it has been repaired before
How to get a price
There’s no need for us to visit first. Photos are enough for us to price nearly every job: we need a close-up, a wider picture and your postcode, and we’ll reply with a fixed price.
Related advice
Repairs by material
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Once a chip exposes it, rust follows quickly, so the metal is treated and sealed before the repair.
Cast iron
Cast iron baths are the classic candidate for re-enamelling. They’re built to last, and only the surface wears, so resurfacing gives them a new life.
What affects the price in Burnrigg
Prices start from £350. We charge the same across the UK, including Burnrigg. What changes the price is:
- The material
- How easy the damage is to reach
- Whether we combine several jobs
- Any earlier repairs that need removing first
No two jobs are quite the same, so we price each one individually. What’s damaged, how badly and how easy it is to reach all play a part, and combining jobs on one visit brings the cost down.
How to get a fixed quote
Most quotes are done from pictures alone. To make it quick:
- One picture of the entire bath
- Natural light rather than flash
- The material, if you know it
- Where you are, by postcode
Email us a photo of the damage and one of the whole item, and tell us you are in Burnrigg, and we will reply with a fixed quote.
Where we work around Burnrigg
Burnrigg is about 4 miles east of Currock, in Cumbria. Our technicians come to homes and businesses in Burnrigg and nearby villages, so you don’t need to take anything anywhere. Our repair technicians cover all 438 towns and villages in Cumbria, from the larger towns to small villages. Our jobs stretch from Burnrigg to Newcastle upon Tyne (48 miles away).
Postcode districts we cover here: CA4. We also travel to Great Corby (1 mile north), Wetheral (1 mile west), Broadwath (1 mile north-east), Wetheral Pasture (1 mile south-west) and Cumwhinton (2 miles south-west). Further out, we also cover Carlisle (5 miles west), Penrith (15 miles south), Currock (4 miles west), Raffles (6 miles west), Botcherby (4 miles west) and Morton (6 miles west).
Near you in Burnrigg
Around Burnrigg, we work in homes near Church of the Holy Trinity and St Constantine, The Wheatsheaf pub and Great Corby Primary School. Burnrigg’s nearest station is Wetheral station, about 0.5 miles north-west of the centre. Other landmarks nearby include Garlands Hospital (2.6 miles west) and Corby Castle (within half a mile west).
Towns and villages near Burnrigg
What else we do in Burnrigg
About our accreditations · Every repair comes with a one-year guarantee.
