Surrey · England
Bath re-enamelling & resurfacing in Burstow, Surrey
Bath re-enamelling for Burstow, without a refit. Get a fixed quote from your photos, then book a visit.
- Resurfacing from £350
- Wear marks under the taps
- A dull, rough surface that will not come clean
How we handle bath re-enamelling in Burstow
We clean, repair and prime the bath before spraying the new finish. The preparation is what makes it last, so we do not cut corners on it. Our technicians work on basins & shower trays, cast iron baths and acrylic baths, and the jobs we see most are staining under the taps and around the waste and a roll-top that’s seen better days.
We stand behind the work with a one-year guarantee.
- Area
- Burstow (RH6)
- Region
- Surrey
- Warranty
- One year on every repair
- Quotes
- From £350. Free, fixed price from pictures
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
What we are called out for in Burstow
Sometimes it’s an earlier resurfacing that has failed, peeling around the waste or bubbling. We strip what’s failing and start again.
Send us a photo if you notice any of these:
- A dull, rough surface that won’t come clean
- An original cast iron bath that needs restoring
- Several chips and rust patches
- A coloured bath you want in white
What your quote should include
- If travel is included in the price
- What protection goes down before work starts
- How changes to the job are handled
- Is the price fixed, and does it include VAT?
What else we do in Burstow
Work for landlords and builders
Rented homes see more wear and tear, and replacing things at every changeover adds up. Repairing between tenants keeps the property presentable for less.
Hospitality businesses cannot afford rooms out of action for long, so most of our work is done in a single visit. We will fit around changeovers where we can.
Burstow and the surrounding area
Burstow is about 2 miles south-east of Horley, in Surrey. Our repair technicians come to homes and businesses in Burstow, so you do not need to take anything anywhere. Burstow is one of 395 towns and villages in Surrey where we work. Our nearest city page is London, about 24 miles away.
Postcode districts we cover here: RH6. Whether you live on Church Road, Church Lane and Green Lane or a nearby road, a technician can come to you. Other places close to Burstow include Fernhill (1 mile west), Shipley Bridge (1 mile south-west), Keeper's Corner (1 mile east), Copthorne (1 mile south) and Tinsley Green (1 mile south-west). Larger places within reach include Epsom (14 miles north-west), Redhill (6 miles north), Ewell (15 miles north), Reigate (6 miles north-west), Caterham (9 miles north) and Dorking (10 miles north-west).
Landmarks near Burstow
Around Burstow, we work in homes near Oakwood School, The Shipley Bridge pub and Church of St Bartholomew. For rail, the closest station is Gatwick Airport station, about 1.3 miles west. Other landmarks nearby include Langley Green Hospital (3.1 miles south-west) and County Mall (3.7 miles south-west). Green spaces nearby include Hedgecourt Lake.
What affects the price in Burstow
Prices start from £350. Every quote is fixed and free. What we look at:
- How easy the damage is to reach
- What kind of damage it is
- How many areas need work
- The material and finish
What it costs depends on how much damage there is and what kind, what it’s made of and how many items we do on one visit. We give a fixed quote from your pictures, so there are no surprises on the day.
Getting a price from pictures
A couple of clear pictures is all it takes. Try to include:
- A photo taken from further back
- A coin beside the damage so we can judge size
- Any details about the material
- A clear, close picture of the problem area
For most jobs, pictures are all we need to give you a price. Tell us what happened and where you are, and we’ll send back a fixed quote and some dates.
Can I fix it myself?
It’s tempting to reach for a kit, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is generally the cheaper route.
If you do try a kit, read the instructions carefully and work on a clean, dry surface, and don’t use it until it has fully cured. If it fails, we can still put it right.
Honest limits
Some problems need a builder, plumber or fitter rather than us:
- Leaking taps or wastes (a plumber’s job)
- Holes rusted through the metal
- A metal bath with a through crack
Not sure? Send photos and we will give you a straight answer.
Surfaces we repair
- Basins & shower trays
- Acrylic baths
- Cast iron baths
- Pressed steel baths
- Victorian roll-tops
Keeping it looking good
To keep it looking its best for years:
- Wipe the bath dry after use in hard water areas
- Stick to gentle, non-abrasive cleaners
- Get any chip repaired quickly
- Rinse off hair dye, oils and bath bombs right away
Stick to mild, non-abrasive cleaners, don’t use suction bath mats, and don’t leave bottles or razors standing on the surface.
The longer worn enamel is left, the rougher it gets, and any rust spreads underneath. Resurfacing sooner means less repair work first.
The process
Your technician turns up at the time we agreed with you, introduces themselves and looks over the damage before anything else. Dust sheets and masking tape go down before any work starts. The work itself takes the best part of a day, and we leave the room as we found it.
- The bathroom is protected and ventilation set up.
- We remove the old silicone and deep clean the bath.
- We repair chips, rust spots and pitting.
- The surface is keyed and primed for the new finish.
- The new finish is sprayed on in several coats and left to cure.
How to prepare
- Avoid using the area for a few hours before we arrive
- Let us know which floor the room is on
- Keep children and pets away from the room on the day
Getting a price
You don’t need a survey visit. Nearly every job can be priced from pictures: send a close-up, a wider shot and your postcode, and we will reply with a fixed quote.
Related advice
Common questions in Burstow
How long does re-enamelling last?
That depends on preparation and how the bath is treated. Properly prepared and looked after, it lasts well, and it’s guaranteed for a year.
Is a repair better than a new one?
Typically, if the item is otherwise sound. Repairing avoids the cost and disruption of replacing. We’ll tell you honestly if replacement makes more sense.
Is it safe with children and pets around?
Yes, as long as they stay out of the room we are working in. We will let you know when it’s safe to use again.
When can you do it?
That depends on our diary for your area. We’ll offer you dates when we send your quote.
Will there be a smell?
Some materials have a smell while they’re applied, which is why we ventilate. It clears as the materials cure.
Can you repair several things at once?
Yes, and it’s often cheaper. Send pictures of everything together and we’ll quote them together.
What happens after I send photos?
We check the damage, the material and your postcode, then reply with a quote with dates.
What do you need from me?
Send photos through the quote form or call 0345 017 0787.
Repairing versus replacing in Burstow
Replacement only makes sense in a few cases: if the bath is cracked through, if you want a different size or shape, or if you are refitting the whole room anyway. In most other cases, resurfacing is the better choice. Our bath re-enamelling starts from £350. A few things move the price: access, material, the extent of the damage and whether we can do several items together. Photos let us give you a fixed figure.
Why Burstow clients choose us
- CHAS and Constructionline accredited
- Everything repaired in place
- Straight answers about what a repair can do
- Usually one visit, start to finish
See our prices page or guide to resurfacing and replacement costs.
About our accreditations · Every repair comes with a one-year guarantee.
