Surrey · England
Bath re-enamelling & resurfacing in Fernhill, Surrey
Damaged bath in Fernhill? We put it right where it is, match it on site and back it with a one-year guarantee.
- Resurfacing from £350
- Worn patches where water runs and sits
- Brown or grey marks that don’t clean off
How we handle bath re-enamelling in Fernhill
Cast iron, steel, acrylic, roll-top and period baths can all be resurfaced. The finish is sprayed on in several coats over a bonding primer, once the bath has been cleaned, repaired and prepared. Whether it’s enamel that’s lost its shine and feels rough and several chips and rust patches, we can help, whatever the material.
Every repair comes with a one-year guarantee.
- Area
- Fernhill (RH6)
- County
- Surrey
- Guarantee
- One year on every repair
- Price
- From £350. Fixed and free, based on pictures
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
Landlord and trade work in Fernhill
We regularly work with letting and managing agents. Just send pictures, the address and how to get access and we’ll arrange it.
For developers and builders, we fix damage before handover, so there is no need to replace a damaged item at the last minute. Several plots can be done in one visit.
What else we do in Fernhill
What we are called out for in Fernhill
Enamel wears gradually. Abrasive cleaners, limescale and years of use wear the gloss away, starting where water runs and sits.
Typical reasons for a call-out include:
- A period or roll-top bath worth keeping
- An outdated colour you’d like to change
- Brown or grey marks that don’t clean off
- A coating lifting around the plughole
Comparing quotes
- How long the guarantee is and what it covers
- Whether a trained technician does the job
- How the room is protected while they work
- What happens if they find more damage
Repairs by material
Cast iron
Cast iron baths are the classic candidate for re-enamelling. The body lasts for generations; only the enamel wears, so resurfacing gives them a new life.
Roll-top and period baths
We can resurface a roll-top inside and out, and the outside can be refinished too.
What bath re-enamelling costs
Prices start from £350. There is no area surcharge for Fernhill. What changes the price is:
- The size and number of damaged areas
- Unusual colours or finishes
- The material
- How many items we do on one visit
There are no surprise extras on the day. What we quote from your photos is what you pay, and if the damage turns out to be different, we discuss it before starting.
Getting a price from pictures
It only takes a minute to photograph the damage. Please include:
- One picture of the whole bath
- Where you are, by postcode
- Any details about the material
- A coin or ruler next to the damage for scale
There is no need for us to visit first. Photos are enough for us to price nearly every job: we need a close-up, a wider picture and your postcode, and we will come back to you with a fixed figure.
Fernhill and the surrounding area
Fernhill is about 2 miles south-east of Horley, in Surrey. From the centre of Fernhill to the outlying streets, the service is the same: a fixed quote, a tidy visit and a guarantee. Fernhill is one of 395 towns and villages in Surrey where we work. We work right across the region, from Fernhill to London (24 miles away).
Here we cover the RH6 postcode area. We regularly work on streets such as Peeks Brook Lane and Donkey Lane and the roads around them. Nearby, we also work in Burstow (1 mile east), Shipley Bridge (1 mile south), Tinsley Green (1 mile south-west), Keeper's Corner (1 mile east) and Copthorne (1 mile south). We also work in nearby towns such as Epsom (14 miles north-west), Redhill (6 miles north), Ewell (15 miles north), Reigate (6 miles north-west), Caterham (9 miles north) and Dorking (10 miles north-west).
Around Fernhill
Around Fernhill, we work in homes near Church of St Bartholomew, The Shipley Bridge pub and Oakwood School, among other places. For rail, the closest station is Gatwick Airport station, roughly 1 mile west. Nearby you’ll also find County Mall (3.6 miles south-west) and Langley Green Hospital (2.9 miles south-west). Green spaces nearby include Hedgecourt Lake.
Repair or replace: which is better?
If the bath is sound, re-enamelling is generally much cheaper than replacing it, once you add removal, plumbing, tiling and decorating to the price of a new bath. It’s much quicker too. Resurfacing from £350, with every job priced individually. A repair normally costs much less than people expect, especially compared with replacing and refitting. Photos let us give you the exact figure.
Why book with us
- Work done at your home or business
- No need to remove anything
- One visit for most repairs
- Straight answers about what a repair can do
Take a look at our full price list and bath cost comparison.
Questions from Fernhill
Which areas do you work in?
We work UK-wide, so Fernhill is covered. Our prices are the same everywhere.
Do you charge for travel?
There’s no separate call-out charge. Your fixed quote includes everything.
It’s been repaired before. Can you still fix it?
Yes, we often do. Removing the old work can add time, and that’s in the quote.
Will the new finish last?
Look after it and it lasts. Gentle cleaning, no suction mats.
Is it messy?
We protect the room with dust sheets and masking first, and we clean up when we’ve finished.
Is it OK to have pets in the house?
On the day, the room should be kept clear of pets and children, mainly so nothing gets touched before it has cured.
How do I get a price for bath re-enamelling in Fernhill?
Resurfacing from £350. Every job gets a fixed quote based on photos of the damage. Send a close-up of the damage and a wider photo and your postcode.
Do I need to be at home?
We need someone to let us in. You do not need to watch us work.
Looking after it afterwards
So the finish stays in good condition:
- Use washing-up liquid and a soft cloth
- Have chips seen to early
- Do not leave bottles, razors or sponges standing on the surface
- A quick wipe after use keeps limescale away
Avoid hair dye, bath bombs and oils sitting on the surface, because they can mark the finish. Fix dripping taps quickly.
Worn enamel only gets rougher with time, and rust spots spread under the surface. Acting earlier keeps the preparation simpler.
What we do, step by step
There is not much you need to do on the day. Let us in and show us the room, and we’ll take it from there. The job generally runs to the best part of a day, tidy-up included.
- We sheet, mask and ventilate the room.
- We remove the old silicone and deep clean the bath.
- Chips, rust and pitting are repaired.
- The surface is keyed and primed for the new finish.
- The new finish is sprayed on in several coats and left to cure until the following day.
How to prepare
- Point us to the nearest place to park
- Let us know about parking or access
- Mention if the room is upstairs or in a flat
Getting a price
For a price in Fernhill, the easiest route is photos: one close up, one from further back, plus your postcode. You’ll get a fixed quote with dates to choose from.
Related advice
DIY kit or professional repair?
If you’ve already tried a DIY fix, that is fine. We take the old repair out and do it properly, so it won’t stop us repairing it. Just mention it when you send pictures, as it can add time.
You can buy a DIY kit for most repairs, and they can tidy up a tiny mark. Where they fall down is colour and preparation: they come in a handful of shades, and if the surface is not prepared the repair won’t last.
About our accreditations · Every repair comes with a one-year guarantee.
