Perth and Kinross · Scotland
Bath re-enamelling & resurfacing in Oakbank, Perth and Kinross
Full bath re-enamelling and resurfacing for householders, landlords and businesses in Oakbank. Send pictures for a free, fixed quote.
- Resurfacing from £350
- Lots of chips and rust spots
- Stains that won’t shift
About our bath re-enamelling in Oakbank
We clean, repair and prime the bath before spraying the new finish. The preparation is what makes it last, so we do not cut corners on it. Typical jobs include staining under the taps and around the waste and an outdated colour you’d like to change, across basins & shower trays, Victorian roll-tops and cast iron baths.
We guarantee the work for a year. If there is a problem with the repair within the year, we return and sort it.
- Area
- Oakbank (PH1, PH2)
- Region
- Perth and Kinross
- Warranty
- A year, on every repair
- Price
- From £350. Free and fixed, from your photos
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
About Oakbank
Oakbank is about 1 mile south-west of Perth, in Perth and Kinross. Whether you’re in the middle of Oakbank or on the outskirts, the service is the same: fixed prices, tidy work and a one-year guarantee. We work in all 107 towns and villages in Perth and Kinross, from the larger towns to small villages. We work right across the region, from Oakbank to Edinburgh (32 miles away).
Postcode districts we cover here: PH1 and PH2. We regularly work on streets such as Elm Lane, Low Road and Maple Road and the roads around them. We also cover the places around Oakbank: Perth (1 mile north-east), Scoonieburn (2 miles south-east), Milltown of Aberdalgie (2 miles south-west), Tarsappie (2 miles south-east) and Forgandenny (3 miles south). Further out, we also cover Blairgowrie and Rattray (15 miles north), Crieff (14 miles west), Auchterarder (11 miles south-west), Kinross (12 miles south), Scone (3 miles north-east) and Coupar Angus (13 miles north-east).
What’s near Oakbank
Typical jobs here are in homes near North Inch, Perth and Perth High School. Oakbank’s nearest station is Perth station, about 1 mile east. Other landmarks nearby include Perth Museum (1.4 miles east) and Balhousie Castle (1.4 miles north-east). For a walk, there is Mailer Hill and Dupplin Lake.
Landlords, agents and businesses in Oakbank
Hospitality businesses can’t afford rooms out of action for long, so we keep visits short and tidy. We can work around your bookings.
Builders, developers and site managers book us for snagging repairs, putting right damage done during fitting so nothing needs replacing. We hold CHAS, Constructionline and SafeContractor accreditations.
How the visit works
We agree an arrival time beforehand, so you know when to expect us. On site, it takes the best part of a day for most jobs. We leave the room clean and you’ll know when it can be used.
- We check the bath and agree the finish with you.
- Taps, tiles and the floor are masked off.
- We degrease the bath, fix any damage and key the surface.
- We apply the primer and then the finish coats.
- We remove the masking, tidy up and give you the curing time.
How to prepare
- Ensure the room can be ventilated
- Plan for the room to be out of bounds to pets and children
- Let us know which floor the room is on
How to get a price
Send us a picture of the damage and a wider shot of the entire item, and tell us you are in Oakbank, and we’ll reply with a fixed quote.
Advice
Can I fix it myself?
It’s tempting to reach for a kit, but the repairs we redo most often are DIY ones that have discoloured or lifted. Doing it properly first is normally the cheaper route.
A DIY attempt isn’t a disaster. We remove the old filler and start again, so it doesn’t stop a professional repair. Just mention it when you send photos, as it can add time.
Common problems we fix in Oakbank
Enamel’s shine is only skin deep, and abrasive cleaning slowly wears it away. After years of use, the surface becomes porous and stains easily.
Signs it’s time to call us include:
- Brown or grey marks that do not clean off
- Lots of chips and rust spots
- An old resurfacing that is failing
- A period or roll-top bath worth keeping
What your quote should include
- Whether they match the colour on site
- How the room is protected while they work
- What prep work is covered
- How changes to the job are handled
Common questions in Oakbank
Can a failed resurfacing be redone?
Yes. Removing the old finish takes extra time, which we include in the price.
Can you resurface a pink bath in white?
Yes, white is the usual choice. Tell us what you’d like when you ask for a quote.
Do you come to Oakbank?
We do. Repair technicians travel to Oakbank from across the region, with no extra charge for travel.
What happens if you find more damage?
Your quote covers the damage in the pictures. Anything extra is discussed before we begin.
What do you need from me?
Send pictures through the quote form or call 0345 017 0787, and we will take it from there.
Is there a guarantee?
Every repair comes with a one-year guarantee. Ask us what it covers when you get your quote.
Will the bath be moved?
No, it stays where it is. We work on the bath in place, with the room protected and ventilated.
Will there be fumes?
Yes, while we’re applying the finish. We set up ventilation and the smell fades as it cures.
Prices and what affects them
Prices start from £350. There are no hourly rates or hidden extras. The price is based on:
- The type of damage
- Any earlier repairs that need removing first
- What the surface is made of
- Doing more than one item at once
No two jobs are quite the same, so we price each one individually. The size and type of damage, the material and access all play a part, and doing several things on one visit costs less than separate visits.
How to get a fixed quote
You can typically get a fixed quote without us visiting. To help us price it:
- Any earlier repairs or coatings
- A coin beside the damage so we can judge size
- One picture of the entire bath
- Your postcode, so we can check dates
For a price in Oakbank, the easiest route is photos: one close up, one from further back, plus your postcode. We reply with a fixed quote and our next available dates.
Different materials, different repairs
Cast iron
A cast iron bath is heavy enough that most people never want to move it. The enamel is the part that wears or chips, and that’s the part we put right.
Pressed steel
Under the enamel of a steel bath is thin metal. Exposed steel rusts quickly, so the metal is treated and sealed before the repair.
Should you replace it?
If you like your bathroom but not your bath’s surface, resurfacing is the simplest answer. Nothing else is disturbed. Resurfacing from £350, with every job priced individually. A repair typically costs much less than people expect, especially compared with replacing and refitting. Photos let us give you the exact figure.
Why us?
- Colour mixed on the day to match
- Typically one visit, start to finish
- Nothing taken out or refitted
- One price list for the entire UK
See our pricing or guide to resurfacing and replacement costs.
Looking after it afterwards
Looking after the surface is easy, and it makes a real difference:
- Repair dripping taps early
- Wipe the bath dry after use in hard water areas
- Keep suction mats out of the bath
- Rinse off hair dye, oils and bath bombs straight away
Give the finish its full curing time before using the bath. Then, gentle cleaning with a soft cloth is enough.
If a previous coating is starting to peel, do not pick at it. Moisture gets underneath and makes it worse, so it’s better to have it stripped and redone.
More services for Oakbank
About our accreditations · Every repair comes with a one-year guarantee.
