Cumbria · England
Bath Re-enamelling in Cartmel
Damaged bath in Cartmel? We repair it in place, match it on site and back it with a one-year guarantee.
- Resurfacing from £350
- Lots of chips and rust spots
- A period or roll-top bath worth keeping
Bath re-enamelling at your home in Cartmel
We do not move the bath, so your taps, tiles and plumbing are left alone. Most baths are done in one visit, and can be used again the next day. Typical jobs include a bath that stays dull however much you clean it and worn patches where water runs and sits, across basins & shower trays, Victorian roll-tops and cast iron baths.
Whatever the size of the job, it’s backed by a one-year guarantee.
- Location
- Cartmel (LA11)
- County
- Cumbria
- Guarantee
- One year on every repair
- Quote
- From £350. Free, fixed quote from pictures
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
For landlords and businesses
Housing associations and facilities teams use us for planned and reactive repairs in Cumbria and across the UK. Repairing in place avoids the disruption of a replacement, which matters when someone is living in the home.
Hotels, guest houses and holiday lets need rooms back in use quickly, so most of our work is done in a single visit. We can work around your bookings.
Aftercare tips
Nothing complicated is needed, just a few sensible habits:
- Fix dripping taps quickly
- Store bottles off the bath
- Get any chip repaired quickly
- Avoid suction-cup mats
Avoid hair dye, bath bombs and oils sitting on the surface, because they can mark the finish. Repair dripping taps promptly.
The longer worn enamel is left, the rougher it gets, and any rust spreads underneath. Acting earlier keeps the preparation simpler.
Places near Cartmel
Also in Cartmel
Repairing versus replacing in Cartmel
A new bath means a plumber, lifting out the old bath, making good the walls and tiles and days without a bathroom. Resurfacing gives the bath a new finish without moving it. Resurfacing from £350, with every job priced individually. It helps to know what pushes a price up or down: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Photos let us give you a fixed figure.
Why choose Surface Doctor in Cartmel
- One visit for most repairs
- Free fixed quotes from pictures
- CHAS, Constructionline and SafeContractor accredited
- We come to you, anywhere in the UK
Read our full price list and resurfacing vs replacement cost guide.
Covering Cartmel
Cartmel is about 6 miles east of Ulverston, in Cumbria. We agree a date that works for you, and we’ll give you an arrival time in advance, so you are not left waiting in all day. We cover all 438 towns and villages in Cumbria. You can also see our page for Liverpool, about 55 miles away.
Jobs in LA11 work the same way as everywhere else we cover. Streets in the area include The Square, The Causeway and Barn Garth, all of which we cover. We also cover the places around Cartmel: Green Bank (1 mile north), Barber Green (2 miles north), Seatle (3 miles north), Backbarrow (4 miles north-west) and Newby Bridge (5 miles north). Larger places within reach include Barrow-in-Furness (12 miles south-west), Kendal (12 miles north-east), Ulverston (6 miles west), Hindpool (13 miles south-west), Salthouse (12 miles south-west) and Dalton-in-Furness (10 miles west).
Around Cartmel
Typical jobs here are in homes near Kings Arms Public House, Cartmel Priory CofE School and Cartmel Priory Church, among other places. The closest station to Cartmel is Cark station, roughly 1.8 miles south-west. Green spaces nearby include Humphrey Head and Tom Tarn.
How we price bath re-enamelling
Prices start from £350. Every quote is fixed and free. What we look at:
- Previous DIY repairs that have to come out
- The colour and finish to match
- How many items we do on one visit
- How many areas need work
What it costs depends on the type and amount of damage, what it’s made of and how many items we do on one visit. You get a fixed price from your photos, so there are no surprises on the day.
Send photos for a quote
It only takes a minute to photograph the damage, and it saves a visit. Try to send:
- A wider photo showing the whole bath
- Any details about the material
- The postcode, so we can plan the visit
- Whether it’s been repaired or coated before
We price from pictures so you don’t have to wait in for a survey. Use the quote form, or ring 0345 017 0787 to talk it through.
FAQs for Cartmel
Will there be a smell?
A little, depending on the job. Open windows and an extractor fan help.
What if the damage is worse than the photos show?
If we find something the photos didn’t show, we explain it first. You decide whether to go ahead.
Can you repair several things at once?
Yes. Doing several items on one visit normally costs less than separate visits. Send pictures of everything you’d like done.
Do you hold any accreditations?
Yes, including CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.
How long does re-enamelling take?
Most baths are done in a day and can be used the day after. We will confirm timings when we quote.
Will there be fumes?
A little, during the work. Ventilation keeps it down, and it fades as the finish cures.
What happens once I’ve sent pictures?
We come back with a fixed price, plus dates. You are under no obligation.
Can you change the colour of my bath?
Yes. We can resurface a coloured bath in white, and we can do the rest of the suite as well.
Materials and what they mean for the repair
Cast iron
Cast iron baths are the classic candidate for re-enamelling. The body lasts for generations; only the enamel wears, so a new finish makes them look new again.
Roll-top and period baths
We can resurface a roll-top inside and out, with the outside refinished as well.
Can I fix it myself?
If you’ve already tried a DIY fix, that is fine. We take the old repair out and do it properly, so it will not stop us repairing it. It does add a little time, so tell us about it when you send pictures.
It’s tempting to reach for a kit, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is generally the cheaper route.
What a repair cannot fix
Some jobs aren’t right for a repair, for example:
- Holes rusted through the metal
- A metal bath with a through crack
- Leaking taps or wastes (a plumber’s job)
Not sure? Send pictures and we’ll give you a straight answer.
Materials we work on in Cartmel
- Acrylic baths
- Victorian roll-tops
- Cast iron baths
- Basins & shower trays
- Pressed steel baths
The process
We agree an arrival time beforehand, so you’re not left guessing. On site, it takes a full day in most cases. The room is left tidy and you will know when it can be used.
- We check the bath and agree the finish with you.
- Taps, tiles and the floor are masked off.
- The bath is degreased, repaired and keyed.
- Primer and finish coats are applied.
- We remove the masking, tidy up and give you the curing time.
Before we arrive
- Ensure the area is dry
- Move bottles, mats and clutter away from the area
- Have somewhere for us to park nearby if possible
How to get a price
A quote takes minutes to ask for: take one close-up and one wider shot of the bath, include your postcode and send them to us. What comes back is a fixed price, not a guess.
Related advice
About our accreditations · Every repair comes with a one-year guarantee.
