Buckinghamshire · England
Bath Re-enamelling for Chalkshire homes
Bath re-enamelling across Chalkshire and nearby, generally in one visit and guaranteed for a year.
- Resurfacing from £350
- A coating lifting around the plughole
- Brown or grey marks that don’t clean off
About our bath re-enamelling in Chalkshire
When a bath is structurally fine but worn out on the surface, re-enamelling is generally the most cost-effective option. There is no removal, plumbing or tiling involved. We’re often asked to fix chips and rust in more than one place and an original cast iron bath that needs restoring, on pressed steel baths, Victorian roll-tops and acrylic baths.
We stand behind the work with a one-year guarantee.
- Where
- Chalkshire (HP17)
- County
- Buckinghamshire
- Guarantee
- 12 months on all our work
- Quotes
- From £350. Fixed and free, based on photos
- Call
- 0345 017 0787
- Updated
- 23 October 2026
Repairs by material
Pressed steel
Steel baths re-enamel well, once any rust has been treated. Rust around the waste is common on steel, so we pay close attention there.
Roll-top and period baths
Freestanding roll-tops can be done inside and out, with the outside refinished as well.
Repair or replace in Chalkshire?
Replacing a bath can take several days across several trades. Re-enamelling is one technician, generally one day, and the bath is usable the day after. Resurfacing from £350, with every job priced individually. A repair usually costs much less than people expect, particularly next to the cost of replacement. Photos let us give you the exact figure.
Why book with us
- Rooms protected and left tidy
- Free fixed quotes from pictures
- Accredited with CHAS, Constructionline and SafeContractor
- No need to remove anything
See our prices page and resurfacing vs replacement cost guide.
Signs you need bath re-enamelling in Chalkshire
The gloss on enamel is thin, and abrasive cleaning slowly wears it away. After years of use, the surface becomes porous and stains easily.
It’s worth getting a quote if you see:
- A roll-top that is seen better days
- Staining under the taps and around the waste
- A peeling or bubbling previous coating
- Chips and rust in more than one place
What your quote should include
- If travel is included in the price
- How to look after the finish
- Whether they match the colour on site
- What happens if the damage is worse than the pictures show
FAQs for Chalkshire
What happens if you find more damage?
Your quote covers the damage in the photos. If there’s more, we will tell you before starting.
Can you resurface a pink bath in white?
Yes, most people go for white. Tell us what you’d like when you ask for a quote.
Do you work for landlords and businesses?
Yes, often. We can quote for several properties together and work between tenancies.
Is repairing better than replacing?
Generally, yes. A repair skips the removal, fitting and redecorating. If it isn’t worth repairing, we’ll tell you.
How soon can you come?
That depends on our diary for your area. We’ll offer you dates when we send your quote.
Do you need to take the bath out?
No. It’s re-enamelled where it stands, so nothing else is disturbed.
Will it make a mess?
We protect the room with dust sheets and masking first, and tidy up before we leave.
Is the work guaranteed?
All our work carries our one-year guarantee. We will explain what it covers when we quote.
About Chalkshire
Chalkshire is about 4 miles south of Aylesbury, in Buckinghamshire. We travel to homes and businesses in Chalkshire and nearby villages, so there is no workshop to go to. Chalkshire is one of 263 towns and villages in Buckinghamshire we cover. Our jobs stretch from Chalkshire to London (about 35 miles away).
We work across the HP17 postcode area and the streets around it. If you are just outside Chalkshire, we cover Terrick (1 mile north), Butler's Cross (1 mile south), Nash Lee (1 mile north), Ellesborough (1 mile south-west) and Coombe (1 mile south). Within a short drive, we also cover Aylesbury (4 miles north), High Wycombe (9 miles south), Chesham (8 miles south-east), Marlow (13 miles south), Amersham (10 miles south-east) and Beaconsfield (12 miles south-east).
Local landmarks in Chalkshire
In Chalkshire, that means homes near Church of St Peter and St Paul, John Colet School and The Russell Arms, among other places. The nearest railway station is Little Kimble station, about 1.3 miles south-west of the centre. Nearby you will also find Little Kimble Motte (1.1 miles south-west) and Stoke Mandeville Hospital (2.7 miles north). For a walk, there is Brush Hill Local Nature Reserve and Coombe Hill.
What we do, step by step
It’s a tidy, low-fuss visit. We confirm the time with you beforehand, cover and mask the work area, then carry out the work, which normally takes the best part of a day. If we find something your pictures didn’t show, we will explain it before carrying on.
- We mask and protect the room and ventilate it.
- Next we degrease the bath and fix chips and rust spots.
- We key the surface and put on a bonding primer.
- Several coats of new finish are sprayed on.
- The bath is left to cure and can normally be used the following day.
Preparing for the visit
- Tell us about parking, stairs or access
- Clear the area around the damage
- Let us know if it has been repaired before
Getting a price
We price from pictures so you don’t have to wait in for a survey. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through.
Read more
Nearby places to Chalkshire
Other services in Chalkshire
What a repair can’t fix
Some problems need a builder, plumber or fitter rather than us:
- Holes rusted through the metal
- Plumbing leaks, which need a plumber
- A metal bath with a through crack
If in doubt, send photos and we will say what we think.
Surfaces we repair
- Pressed steel baths
- Basins & shower trays
- Cast iron baths
- Victorian roll-tops
- Acrylic baths
How we price bath re-enamelling
Prices start from £350. We give every job a fixed price from pictures. This is what makes a difference:
- What kind of damage it is
- Previous DIY repairs that have to come out
- The material
- The size and number of damaged areas
We charge the same wherever you are, with no extra for Chalkshire. The job itself decides the price: how much damage, what it’s made of and how many items.
Quotes from your pictures
You can normally get a fixed price without us visiting. To make it quick:
- A coin beside the damage so we can judge size
- A picture taken from further back
- Your postcode, so we can check dates
- One sharp close-up of the damage
For a price in Chalkshire, the easiest route is photos: a close-up, a wider shot and your postcode. You’ll get a fixed quote with dates to choose from.
Landlord and trade work in Chalkshire
Landlords, letting agents and housing providers in Chalkshire use us as well as householders. Repairing between tenancies keeps void periods short, and it generally costs far less than a refit.
We also carry out snagging repairs for builders and developers, putting right damage done during fitting. We’re CHAS, Constructionline and SafeContractor accredited.
Aftercare tips
After the repair has cured, a few habits help it last:
- Repair dripping taps early
- Do not leave bottles, razors or sponges standing on the surface
- A quick wipe after use keeps limescale away
- Clean with a soft cloth and mild detergent
Dry the bath after use if possible, especially in hard water areas, and rinse off any bath products.
The longer worn enamel is left, the rougher it gets, and rust spots spread under the surface. Resurfacing sooner means less repair work first.
About our accreditations · Every repair comes with a one-year guarantee.
