Buckinghamshire · England
Bath Re-enamelling for North Lee homes
Full bath re-enamelling and resurfacing for homes and businesses in North Lee and across Buckinghamshire. Send pictures for a free, fixed quote.
- Resurfacing from £350
- Lots of chips and rust spots
- A coating lifting around the plughole
Landlord and trade work in North Lee
We also carry out snagging repairs for builders and developers, putting right damage done during fitting. We’re CHAS, Constructionline and SafeContractor accredited.
Hospitality businesses can’t afford rooms out of action for long, so most of our work is done in a single visit. We will fit around changeovers where we can.
Bath re-enamelling in North Lee, done in place
Most baths are re-enamelled in a day, with the bath ready to use the following day. Nothing is disconnected or removed. We work on basins & shower trays, acrylic baths and cast iron baths, and the jobs we see most are a coating lifting around the plughole and chips and rust in more than one place.
Your repair is guaranteed for a year, as with every job we do.
- Area
- North Lee (HP22)
- Area hub
- Buckinghamshire
- Warranty
- A year, on every repair
- Price
- From £350. Fixed and free, based on photos
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
Common questions in North Lee
Can you resurface a pink bath in white?
Yes. We can resurface a coloured bath in white, and the basin and toilet can be done too.
Can I get a quote without a visit?
Nearly always. We only ask to see it in person if the photos can’t show what we need.
Can you fix a peeling bath coating?
Normally, yes. We strip the failing coating and resurface it properly. Mention it when you send pictures.
What happens next?
We check the damage, the material and your postcode, then reply with a quote and the next dates we have.
Can you repair several things at once?
Of course, and it normally saves money. Send pictures of everything together and you will get one combined price.
Will the new finish last?
Look after it and it lasts. Avoid abrasive cleaners and suction mats.
When can you do it?
We’ll give you dates with your quote. If it’s urgent, say so and we’ll do what we can.
Do you charge for travel?
Travel is included in the price, and we charge the same wherever you are.
What bath re-enamelling costs
Prices start from £350. Every quote is fixed and free. What we look at:
- Whether we combine several jobs
- How easy the damage is to reach
- How hard the colour is to match
- What kind of damage it is
Set against the cost of replacement, a repair is normally a fraction of the price, because nothing has to be taken out, refitted or made good. The quote lists exactly what you are paying for.
Send photos for a quote
Photographing the damage takes a minute. Try to send:
- The material, if you know it
- Whether it’s been repaired or coated before
- Good light, ideally daylight, without flash glare
- One sharp close-up of the damage
A quote takes minutes to ask for: take one close-up and one wider shot of the bath, include your postcode and send them over. You will get a fixed price, not an estimate.
Should you replace it?
Getting a cast iron bath out is hard work: they’re heavy, frequently need breaking up, and a new one isn’t cheap. Re-enamelling avoids all of it. Resurfacing from £350, with every job priced individually. Every job is a little different, so we price each one individually. The size and type of damage, the material and access all make a difference, and doing several things on one visit costs less than separate visits.
What you get with us
- Most jobs done in one visit
- One-year guarantee on every repair
- Colour-matched on site
- Rooms protected and left tidy
Read our full price list and resurfacing vs replacement cost guide.
Aftercare tips
Much of the damage we repair could have been avoided. These habits help:
- Get any chip repaired quickly
- Don’t let dyes or oils sit on the finish
- Leave the bath for the full curing time before using it
- A dripping tap should be fixed promptly
Rinse away dyes, oils and bath bombs straight after use, because they can mark the finish. Fix dripping taps quickly.
Avoid scrubbing a dull bath with abrasive cleaners. It just wears the enamel further.
Different materials, different repairs
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. Only the enamel surface wears or chips, and that is what we repair.
Pressed steel
Pressed steel baths take a new finish well, once any rust has been treated. Rust around the waste is common on steel, so we pay close attention there.
Places near North Lee
More services for North Lee
What happens on the day
On the day, the technician arrives at the agreed time, protects the room with dust sheets and masking and gets started. Expect it to take the best part of a day. We clean up when we are done and let you know when you can use it again.
- First we look the bath over and confirm the finish.
- Taps, tiles and the floor are masked off.
- We degrease the bath, fix any damage and key the surface.
- Primer and finish coats are applied.
- We remove the masking, tidy up and give you the curing time.
Getting ready for the visit
- Let us know about parking or access
- Clear toiletries, mats and anything else from around the area
- Mention any earlier repairs or resurfacing
Get a quote
Most customers in North Lee get their price from photos. Tell us what happened and where you are, and we will send back a fixed quote and some dates.
Related advice
When to call us in North Lee
Previous coatings can fail too, lifting by the plughole or blistering. We strip what’s failing and start again.
Keep an eye out for these signs:
- An original cast iron bath that needs restoring
- Wear marks under the taps
- An outdated colour you’d like to change
- A coating lifting around the plughole
Questions to ask before you book
- How soon you can use it again
- How your room will be protected
- A fixed price, and whether VAT is included
- Who turns up on the day
DIY kit or professional repair?
If you’re set on a kit, follow its instructions closely, and give it the full curing time. If it does not work out, we can still repair it properly.
A DIY attempt isn’t a disaster. We remove the old filler and start again, so it does not stop a professional repair. Just mention it when you send photos, as it can add time.
Where we work around North Lee
North Lee is about 3 miles south of Aylesbury, in Buckinghamshire. Our work suits any type of property, old or new, large or small, plus businesses and rented homes. Our technicians cover 263 places in Buckinghamshire, from the larger towns to small villages. You can also see our page for London, about 36 miles away.
We cover every part of the HP22 postcode area. We also travel to Nash Lee (1 mile south-east), Terrick (1 mile south-east), Chalkshire (1 mile south-east), Stoke Mandeville (1 mile north-east) and Ellesborough (1 mile south). Within a short drive, we also cover Aylesbury (3 miles north), High Wycombe (10 miles south), Chesham (9 miles south-east), Marlow (14 miles south), Amersham (11 miles south-east) and Beaconsfield (13 miles south-east).
Landmarks near North Lee
Our customers here include homes close to The Mandeville School, Church of St Mary and Stoke Mandeville Combined School, among other places. For rail, the closest station is Stoke Mandeville station, roughly 1.1 miles north-east of the centre. Well-known places in the area include National Paralympic Heritage Centre (1.9 miles north) and Little Kimble Motte (1.7 miles south). Green spaces nearby include Brush Hill Local Nature Reserve and Beacon Hill.
About our accreditations · Every repair comes with a one-year guarantee.
