Hampshire · England
Bath Re-enamelling in Chithurst
Our repair technicians come to Chithurst for full bath re-enamelling and resurfacing. Everything is done in place, and the work is guaranteed.
- Resurfacing from £350
- A coating lifting around the plughole
- Lots of chips and rust spots
What a repair can’t fix
Some jobs are not right for a repair, including:
- A poorly supported acrylic bath, until it’s firmed up
- A cast iron or steel bath that’s cracked right through
- Plumbing leaks, which need a plumber
Not sure? Send pictures and we will give you a straight answer before you book.
Materials we repair
- Victorian roll-tops
- Cast iron baths
- Acrylic baths
- Pressed steel baths
- Basins & shower trays
How we handle bath re-enamelling in Chithurst
Cast iron and steel baths are ideal for re-enamelling, and acrylic baths can be resurfaced too. The result is a smooth, even, glossy finish. Our technicians work on pressed steel baths, Victorian roll-tops and cast iron baths, and common reasons people contact us are lots of chips and rust spots and an old resurfacing that’s failing.
Peace of mind is built in: each job carries a one-year guarantee, and we explain what it covers before booking.
- Where
- Chithurst (GU31)
- Region
- Hampshire
- Guarantee
- 12 months on all our work
- Quote
- From £350. Free and fixed, from your photos
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
Where we work around Chithurst
Chithurst is about 6 miles east of Petersfield, in Hampshire. Our work suits any type of property, old or new, large or small, plus businesses and rented homes. Our repair technicians cover all 683 towns and villages across Hampshire. You can also see our page for London, about 46 miles away.
We cover every part of the GU31 postcode area and the streets around it. Close by, we cover Trotton Marsh (1 mile north-west), Borden (1 mile north-west), Rogate (2 miles west), Milland (2 miles north) and Rake (4 miles north-west). Further out, we also cover Havant (13 miles south-west), Horndean (11 miles south-west), Alton (13 miles north-west), Waterlooville (13 miles south-west), Petersfield (6 miles west) and Purbrook (14 miles south-west).
Landmarks near Chithurst
In Chithurst, that means homes near Stedham Primary School, Chithurst Church and The Keeper's Arms Public House, among other places. For rail, the closest station is Liphook station, roughly 4.9 miles north. Further afield, we also cover the area around Midhurst Museum (2.9 miles east) and Midhurst Community Hospital (2.9 miles east). Open spaces near Chithurst include Wheeler's Down and Iping and Stedham Commons.
Do you need bath re-enamelling in Chithurst?
Previous coatings can fail too, lifting by the plughole or blistering. We strip what’s failing and start again.
Most people get in touch after spotting one of these:
- Worn patches where water runs and sits
- Enamel that is lost its shine and feels rough
- Brown or grey marks that do not clean off
- A coloured bath you want in white
What to look for in a quote
- Whether they match the colour on site
- Whether a trained technician does the job
- Is the price fixed, and does it include VAT?
- How long the guarantee is and what it covers
Towns and villages near Chithurst
Also in Chithurst
Prices and what affects them
Prices start from £350. Every quote is fixed and free. What we look at:
- Whether we combine several jobs
- Unusual colours or finishes
- The material
- Whether old repairs or coatings need taking off
Most people are surprised how affordable a repair is, especially compared with replacing and refitting. Send pictures and we’ll give you the exact figure.
Send pictures for a quote
Most quotes are done from photos alone. To make it quick:
- A wider photo showing the whole bath
- Any earlier repairs or coatings
- Your postcode, so we can check dates
- The material, if you know it
There is no need for us to visit first. Photos are enough for us to price nearly every job: we need a close-up, a wider picture and your postcode, and we’ll come back to you with a fixed figure.
FAQs for Chithurst
Is there a call-out fee?
There’s no separate call-out charge. The fixed quote covers the visit and the work.
Are you a vetted contractor?
We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.
What does bath re-enamelling cost?
Resurfacing from £350. The exact price depends on the damage, so we quote from photos. You know the full cost before anything is booked.
Can you re-enamel a roll-top bath?
Yes, frequently. The inside is resurfaced, and we can refinish the outside as well.
Do the materials smell?
Some materials have a smell while they’re applied. It clears as the materials cure.
Is it safe with children and pets around?
Yes, as long as they stay out of the room we are working in. We’ll tell you when the room can be used again.
Do you work in Chithurst?
We do. We send a technician to Chithurst for every job, and the price is the same as everywhere else.
Does someone need to be in?
Someone needs to let us in and show us the job. After that, you can carry on with your day.
DIY repairs versus a professional job
The difference between a kit and a professional repair is mostly in the preparation and colour. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, then guarantee it for a year.
It’s natural to want to try a repair yourself. The trouble is that kit repairs frequently look fine at first and then fail, and the old filler has to come out before a proper repair.
What we do, step by step
From the moment we arrive, we keep the work contained to the one room. We mask off everything nearby, the work takes the best part of a day, and we finish by cleaning up and talking you through the result.
- We mask and protect the room and ventilate it.
- We clean and degrease the bath and repair any chips or rust.
- We key the surface and put on a bonding primer.
- We spray on the new enamel finish in several coats.
- Once cured, normally by the next day, the bath is ready.
How to prepare
- Let us know which floor the room is on
- Keep pets and children out of the room while we work
- Avoid using the area for a few hours before we arrive
Ask for a price
The quickest way to a price is to send a couple of pictures through our quote form or ring us. We’ll say right away whether it can be repaired.
Read more
Landlords, agents and businesses in Chithurst
Builders, developers and site managers book us for snagging repairs, putting right damage done during fitting so nothing needs replacing. We hold CHAS, Constructionline and SafeContractor accreditations.
We are used to working with agents and managing companies. Just send photos, the address and how to get access and we will handle the rest.
Repairing versus replacing in Chithurst
A new bath means a plumber, lifting out the old bath, making good the walls and tiles and several days without a working bathroom. Resurfacing gives the bath a new finish without moving it. Prices start from £350. A few things move the price: access, material, the extent of the damage and whether we can do several items together. Send photos and you will get a fixed figure.
Why Chithurst clients choose us
- No extra charge for your area
- Honest advice, even when it means no job
- Colour mixed on the day to match
- Fixed prices from your photos
See our full price list and resurfacing vs replacement cost guide.
Looking after it afterwards
Much of the damage we repair could have been avoided. These habits help:
- Repair dripping taps early
- Respect the curing time we give you
- Avoid suction-cup mats
- Wash away dyes and oils after use
Give the finish its full curing time before using the bath. Then, gentle cleaning with a soft cloth is enough.
Rust spots on a worn bath get worse with time, and each one adds to the preparation. It’s simpler to resurface before they spread.
About our accreditations · Every repair comes with a one-year guarantee.
