Hampshire · England
Bath re-enamelling & resurfacing in Borden, Hampshire
Full bath re-enamelling and resurfacing in Borden, carried out at your home and guaranteed for a year.
- Resurfacing from £350
- Thin, worn enamel in places
- A bath in a colour that no longer suits
How we handle bath re-enamelling in Borden
Re-enamelling gives a worn bath a new glossy surface without taking anything out. It’s the answer when the entire bath is tired rather than one spot. We work on basins & shower trays, acrylic baths and cast iron baths, and common reasons people get in touch are enamel that’s lost its shine and feels rough and a coloured bath you want in white.
A one-year guarantee comes as standard, so you are not left on your own once we’ve gone.
- Area
- Borden (GU30)
- Area hub
- Hampshire
- Guarantee
- A year, on every repair
- Quote
- From £350. Free, fixed quote from pictures
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
Looking after it afterwards
So the finish stays in good condition:
- Leave the bath for the full curing time before using it
- Never use suction bath mats
- Repair dripping taps early
- Stick to gentle, non-abrasive cleaners
Treat the new finish gently at first: let it cure fully, then use mild cleaners only. After that, no abrasives and no suction mats.
Leave a peeling coating alone. Water gets under it and the damage spreads, so it’s better to have it stripped and redone.
Nearby places to Borden
More services for Borden
DIY repairs versus a professional job
If you’ve already tried a DIY fix, that is fine. We take the old repair out and do it properly, so it will not stop us repairing it. Just mention it when you send pictures, as it can add time.
If you’re set on a kit, follow its instructions closely, ensure the area is clean and completely dry, and give it the full curing time. If it doesn’t work out, we can still repair it properly.
When we’d advise against a repair
A repair is not always the answer, and we would rather say so up front. Repairs will not solve:
- A poorly supported acrylic bath, until it’s firmed up
- Plumbing leaks, which need a plumber
- Holes rusted through the metal
If in doubt, send photos and we’ll say what we think.
What we work on
- Victorian roll-tops
- Pressed steel baths
- Basins & shower trays
- Acrylic baths
- Cast iron baths
How the visit works
A typical visit goes like this: we arrive at the agreed slot, protect everything around the work area, carry out the work and tidy away. Allow most of the day. Before we go, we will explain when it can be used and what to avoid for the first few days.
- We mask and protect the room and ventilate it.
- Next we degrease the bath and fix chips and rust spots.
- We key the surface and put on a bonding primer.
- We spray on the new enamel finish in several coats.
- Once cured, normally by the day after, the bath is ready.
Getting ready for the visit
- Tell us if there are stairs or a lift
- Clear toiletries, mats and anything else from around the area
- Keep children and pets away from the room on the day
How to get a price
There’s no need for us to visit first. Photos are enough for us to price nearly every job: send a close-up, a wider shot and your postcode, and we’ll come back to you with a fixed figure.
Read more
How we price bath re-enamelling
Prices start from £350. We charge the same across the UK, including Borden. What changes the price is:
- The size and number of damaged areas
- Where the damage is and how we get to it
- Any earlier repairs that need removing first
- What the surface is made of
Every job is a little different, so each one is priced on its own. What’s damaged, how badly and how easy it is to reach all play a part, and doing several things on one visit costs less than separate visits.
Quotes from your pictures
It only takes a minute to photograph the damage, and it saves a visit. Try to send:
- The postcode, so we can plan the visit
- Daylight if possible, and no flash reflection
- Something in shot to show the size
- A clear, close picture of the problem area
The quickest way to a price is to send a couple of pictures through our quote form or ring us. We will say immediately whether it can be repaired.
For landlords and businesses
For developers and builders, we fix damage before handover. We can visit several plots in one trip.
We also carry out snagging repairs for builders and developers, fixing chips and scratches before handover so nothing needs replacing. We are CHAS, Constructionline and SafeContractor accredited.
Borden and the surrounding area
Borden is about 5 miles east of Petersfield, in Hampshire. Wherever you are in the GU30 postcode area, we come to you. We work in all 683 towns and villages across Hampshire, from the larger towns to small villages. Our jobs stretch from Borden to London (46 miles away).
Every address in GU30 is covered. Other places close to Borden include Trotton Marsh (1 mile east), Rogate (1 mile south-west), Chithurst (1 mile south-east), Milland (2 miles north-east) and Rake (2 miles north-west). Further out, we also cover Havant (13 miles south-west), Horndean (11 miles south-west), Alton (11 miles north-west), Waterlooville (13 miles south-west), Petersfield (5 miles west) and Purbrook (14 miles south-west).
Near you in Borden
Around Borden, we work in homes near Church of St Peter and the streets around them. The nearest railway station is Liss station, roughly 3.6 miles north-west. Nearby you’ll also find Midhurst Community Hospital (4.1 miles south-east). Open spaces near Borden include Wheeler's Down and Iping and Stedham Commons.
Repairing versus replacing in Borden
Replacement only makes sense in a few cases: a cracked-through bath, a change of size or shape, or a full refit. Otherwise, resurfacing generally wins. Our bath re-enamelling starts from £350. A repair generally costs much less than people expect, especially compared with replacing and refitting. Send photos and we will give you the exact figure.
Why us?
- We leave the room as we found it
- Free fixed quotes from pictures
- One visit for most repairs
- Everything repaired in place
Take a look at our pricing and resurfacing vs replacement cost guide.
What your bath is made of matters
Acrylic
We resurface acrylic baths as well, with a coating system suited to acrylic. The bath needs to be firm and well supported.
Roll-top and period baths
Freestanding roll-tops can be done inside and out, and the outside can be refinished too.
Common questions in Borden
Is it messy?
No. The work area is masked and covered, and we leave the room clean.
Is a repair better than a new one?
Usually, if the item is otherwise sound. Repairing avoids the cost and disruption of replacing. We’ll tell you honestly if replacement makes more sense.
What happens after I send photos?
You’ll get a fixed quote back. There is no obligation to book.
I’m a tenant. Can you help?
We can work for tenants, landlords or agents. Just ensure the landlord agrees.
Do you charge for travel?
Travel is included in the price, and we charge the same wherever you are.
Can you redo someone else’s repair?
Yes, we frequently do. It can add a little time, which we include in the quote.
Is it OK to have pets in the house?
On the day, the room should be kept clear of pets and children, mainly so nothing gets touched before it has cured.
How long is the bath unusable?
One day for most baths, ready the day after. We give you timings with the quote.
About our accreditations · Every repair comes with a one-year guarantee.
