Somerset · England
Bath re-enamelling & resurfacing in Churchinford, Somerset
Problem with your bath in Churchinford? We put it right where it is, mix the colour on the day and guarantee the work for a year.
- Resurfacing from £350
- Thin, worn enamel in places
- A period or roll-top bath worth keeping
For landlords and businesses
Landlords, letting agents and housing providers in Churchinford use us as well as homeowners. A repair between tenants keeps the property empty for less time, and it typically costs far less than a refit.
We also carry out snagging repairs for builders and developers, fixing chips and scratches before handover so nothing needs replacing. We’re CHAS, Constructionline and SafeContractor accredited.
About our bath re-enamelling in Churchinford
We resurface cast iron, steel and acrylic baths, including roll-tops and period baths. Several coats of finish go on over a bonding primer, after the bath has been cleaned, repaired and keyed. Whether it’s stains that won’t shift and a coloured bath you want in white, we can help, on basins & shower trays, pressed steel baths and acrylic baths alike.
Your repair is guaranteed for a year, as with every job we do.
- Where
- Churchinford (TA3)
- Area hub
- Somerset
- Warranty
- One year on every repair
- Price
- From £350. Fixed and free, based on photos
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
When to call us in Churchinford
By the time a bath is a few decades old, it may have a mix of issues: worn patches, chips, rust spots and stains. Resurfacing sorts them out together.
The most common problems we are called about are:
- Enamel that’s lost its shine and feels rough
- Brown or grey marks that don’t clean off
- A coating lifting around the plughole
- Thin, worn enamel in places
Before booking anyone
- How long it needs to cure
- Aftercare advice
- Who will actually do the work
- What protection goes down before work starts
The process
From the moment we arrive, the aim is to do the job without disturbing the rest of your home. We mask off everything nearby, the job takes most of the day, depending on what we find, and we finish with a tidy-up and a look at the finished work together.
- We sheet, mask and ventilate the room.
- We remove the old silicone and deep clean the bath.
- Chips, rust and pitting are repaired.
- The surface is keyed and primed for the new finish.
- Several coats of finish are sprayed on, then it cures until the following day.
How to prepare
- Tell us about parking, stairs or access
- Tell us about any previous repairs or coatings
- Clear toiletries, mats and anything else from around the area
Getting a price
Getting a price is easy: snap the damage close up and then the whole item, send them to us with your postcode, and you will get a fixed price back. Quotes are free and no obligation.
Related advice
Also near Churchinford
Other services in Churchinford
What bath re-enamelling costs
Prices start from £350. Quotes are free and the price is fixed. What we look at:
- The material
- How much damage there is
- How easy the damage is to reach
- The colour and finish to match
The price reflects the work involved, not your postcode. You’ll see the full price before booking, with nothing added on the day.
Send photos for a quote
You can usually get a fixed price without us visiting. To make it quick:
- One picture of the whole bath
- A coin beside the damage so we can judge size
- Natural light rather than flash
- Your postcode, so we can check dates
For most jobs, photos are all we need to give you a price. Add a line about what happened and your postcode, and we’ll send back a fixed quote and some dates.
Repairing versus replacing in Churchinford
A refit takes several trades and several days. Re-enamelling takes one technician and normally one day, and the bath can be used the day after. Our bath re-enamelling starts from £350. Every job is a little different, so each one is priced on its own. The size and type of damage, the material and access all play a part, and doing several things on one visit costs less than separate visits.
What you get with us
- We will tell you if it’s not worth repairing
- CHAS, Constructionline and SafeContractor accredited
- A year’s guarantee on all work
- Free fixed quotes from pictures
Read our pricing or resurfacing vs replacement cost guide.
What your bath is made of matters
Cast iron
A cast iron bath is heavy enough that most people never want to move it. The enamel is the part that wears or chips, and that’s what we repair.
Acrylic
We resurface acrylic baths as well, using a system that bonds to acrylic. The bath needs to be firm and well supported.
Keeping it looking good
It’s all simple stuff, just a few sensible habits:
- Have chips seen to early
- A dripping tap should be fixed promptly
- Store bottles off the bath
- Do not let dyes or oils sit on the finish
A quick rinse and wipe after use helps, particularly where water is hard, so limescale cannot build up.
Do not try to scrub a worn bath back to shine. It just wears the enamel further.
Churchinford: your questions answered
What happens once I’ve sent pictures?
We review the photos and send a fixed quote with dates.
What happens if you find more damage?
It’s rare, but if it happens we talk to you first. The price only changes if you agree.
Do you resurface freestanding baths?
Yes, frequently. We resurface the inside, and the outside can be refinished too.
How durable is a resurfaced bath?
Look after it and it lasts. Gentle cleaning, no suction mats.
How long is the bath unusable?
Normally a day, then it’s ready to use the following day. A badly pitted bath can need a second day.
Can you price it without visiting?
Normally, yes. Clear pictures let us give you a fixed quote without visiting.
Can landlords book you?
Yes, often. We quote for multiple addresses and fit around tenancy changeovers.
Can you fix a peeling bath coating?
Yes, we do this regularly. Stripping the old coating adds time, so it’s reflected in the quote.
DIY kit or professional repair?
A DIY attempt is not a disaster. We remove the old filler and start again, so it does not stop a professional repair. It does add a little time, so tell us about it when you send photos.
If you’re set on a kit, follow its instructions closely and work on a clean, dry surface, and do not use it until it has fully cured. If it fails, we can still put it right.
Covering Churchinford
Churchinford is about 7 miles south-east of Wellington, in Somerset. Our technicians come to homes and businesses in Churchinford, so there’s no workshop to go to. Churchinford is one of 640 towns and villages in Somerset we cover.
Jobs in TA3 are booked in the same way as anywhere else. Local streets include Church Road, Royston Road and Barn Close, and we cover them all. We also cover the places around Churchinford: Garlandhayes (3 miles north-west), Blagdon Hill (3 miles north), Woodram (4 miles north), Pitminster (4 miles north) and Poundisford (5 miles north). We also work in nearby towns such as Taunton (8 miles north), Chard (7 miles east), Wellington (7 miles north-west), Crewkerne (14 miles east), Wilton (7 miles north) and Comeytrowe (7 miles north).
Around Churchinford
In Churchinford, that means homes near Church of St Leonard and York Inn and the streets around them. For a walk, there is Staple Hill and Bishopswood Meadows.
About our accreditations · Every repair comes with a one-year guarantee.
