Somerset · England
Bath re-enamelling & resurfacing in Clayhanger, Somerset
Bath re-enamelling in Clayhanger without the cost of replacing. Send us photos for a fixed price, then book a visit.
- Resurfacing from £350
- Several chips and rust patches
- Brown or grey marks that don’t clean off
How we handle bath re-enamelling in Clayhanger
Cast iron, steel, acrylic, roll-top and period baths can all be resurfaced. Several coats of finish go on over a bonding primer, after the bath has been cleaned, repaired and keyed. Whether it’s lots of chips and rust spots and a bath in a colour that no longer suits, we can help.
Big or small, it’s backed by a one-year guarantee.
- Location
- Clayhanger (TA20)
- Region
- Somerset
- Cover
- One year on every repair
- Price
- From £350. Fixed and free, based on pictures
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
Aftercare tips
To keep it looking its best for years:
- Repair dripping taps early
- Have chips seen to early
- Store bottles off the bath
- Do not let dyes or oils sit on the finish
Dry the bath after use if possible, especially in hard water areas, and rinse away any product left on the surface.
Don’t try to scrub a worn bath back to shine. It just wears the enamel further and makes resurfacing more work.
Honest limits
In fairness, some problems need a different fix:
- Holes rusted through the metal
- Damage hidden under a previous coating, until it’s stripped back
- An acrylic bath that flexes badly underfoot
If in doubt, send pictures and we will say what we think.
Materials we work on in Clayhanger
- Acrylic baths
- Victorian roll-tops
- Basins & shower trays
- Cast iron baths
- Pressed steel baths
Repairs by material
Roll-top and period baths
We can resurface a roll-top inside and out, and the outside can be refinished too.
Acrylic
Acrylic is light and warm to the touch, but it needs firm support underneath. Cracks are strengthened from behind before the front is finished.
Places near Clayhanger
What else we do in Clayhanger
Can I fix it myself?
You can buy a DIY kit for most repairs, and they can make a small mark look better. The trouble is colour and preparation: they come in a handful of shades, and if the surface isn’t prepared the repair will not last.
A DIY attempt isn’t a disaster. We take the old repair out and do it properly, so it will not stop us repairing it. Just mention it when you send pictures, as it can add time.
Landlord and trade work in Clayhanger
Builders use us to fix snagging damage before handover. We can visit several plots in one trip.
We regularly work with letting and managing agents. Send the address, photos and access details.
Questions from Clayhanger
Can you re-enamel a roll-top bath?
Yes, often. The inside is resurfaced, and we can refinish the outside as well.
Do you need to take the bath out?
No, it stays where it is. Everything is done in your bathroom, with the room masked and ventilated.
Is it messy?
Very little mess: we sheet and mask everything nearby, and we leave the room clean.
Do I have to be there?
We need someone to let us in. After that, you can carry on with your day.
What does bath re-enamelling cost?
Prices start from £350. Because every job differs, we price from photos. You will get a fixed figure before you book.
Will the new finish last?
It depends on preparation, use and care. Properly prepared and looked after, it lasts well, and our work is guaranteed for a year.
Is there any odour?
There can be some smell while we work. It fades as everything cures.
I rent my home. Can I book you?
We can work for tenants, landlords or agents. Get your landlord’s agreement first.
What we’re called out for in Clayhanger
Sometimes it’s an earlier resurfacing that has failed, peeling around the waste or bubbling. Failing coatings are stripped back before we resurface.
Look out for these signs:
- A period or roll-top bath worth keeping
- A bath in a colour that no longer suits
- Stains that will not shift
- A coating lifting around the plughole
What to look for in a quote
- How long the guarantee is and what it covers
- Whether cleaning and preparation are in the price
- How changes to the job are handled
- Who turns up on the day
How we price bath re-enamelling
Resurfacing from £350. Each job gets its own fixed quote. This is what makes a difference:
- How many areas need work
- Whether old repairs or coatings need taking off
- Unusual colours or finishes
- How many items we do on one visit
We don’t add extras on the day. The price we quote from your pictures is the price you pay, unless the damage turns out to be different, in which case we talk to you first.
Getting a price from pictures
Almost every job we do is priced from pictures. This is what to send:
- A coin or ruler next to the damage for scale
- Your postcode, so we can check dates
- A clear, close picture of the problem area
- One picture of the whole bath
No survey visit is needed: we price from photos. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through, and we’ll come back with a fixed figure.
Clayhanger and the surrounding area
Clayhanger is about 2 miles north of Chard, in Somerset. Our work suits any type of property, old or new, large or small, as well as offices, shops and holiday lets. We work in all 640 towns and villages in Somerset, from the larger towns to small villages.
Postcode districts we cover here: TA20. If you’re just outside Clayhanger, we cover Wadeford (1 mile south-west), Combe St Nicholas (1 mile west), Chard (2 miles south), Chaffcombe (2 miles east) and Forton (3 miles south-east). We also work in nearby towns such as Taunton (10 miles north-west), Yeovil (15 miles east), Wellington (12 miles north-west), Crewkerne (8 miles east), Somerton (15 miles north-east) and Wilton (10 miles north-west).
Near you in Clayhanger
We visit homes around Church of St Nicholas, Combe St Nicholas Church of England VA Primary School and The Haymaker Inn and the streets around them. Further afield, we also cover the area around Chard Community Hospital (1.8 miles south-east) and Chard Plumbing Museum (1.8 miles south). Green spaces nearby include Bishopswood Meadows.
How the visit works
We work cleanly and quietly. We protect the area first, then the work takes most of the day. At the end we talk you through the curing time and the aftercare.
- The bathroom is protected and ventilation set up.
- Old sealant is cut out and the bath is deep cleaned.
- We repair chips, rust spots and pitting.
- We key the bath and apply a bonding primer.
- The new finish is sprayed on in several coats and left to cure.
How to prepare
- Let us know if it has been repaired before
- Let the surface dry out before the visit
- Clear toiletries, mats and anything else from around the area
Get a quote
Send us a picture of the damage and one of the whole item, with your TA20 postcode, and we’ll reply with a fixed quote.
Read more
About our accreditations · Every repair comes with a one-year guarantee.
