Somerset · England

Bath Re-enamelling for Wadeford homes

Bath re-enamelling across Wadeford and nearby, generally in one visit and guaranteed for a year.

  • Resurfacing from £350
  • An outdated colour you’d like to change
  • A roll-top that is seen better days
Surface Doctor technician refinishing the outside of a roll-top bath

Bath re-enamelling near Wadeford

Should I try a DIY kit first?

It’s tempting to reach for a kit, but many of the jobs we do start with putting right a DIY repair. Getting it right first time is normally cheaper.

If you do try a kit, read the instructions carefully, and do not use it until it has fully cured. If it doesn’t work out, we can still repair it properly.

Bath re-enamelling in Wadeford without replacing anything

Cast iron and steel baths are ideal for re-enamelling, and we can resurface acrylic baths as well. The result is a smooth, even, glossy finish. Our repair technicians work on Victorian roll-tops, pressed steel baths and cast iron baths, and common reasons people contact us are worn patches where water runs and sits and a roll-top that’s seen better days.

A one-year guarantee comes as standard.

Before and after: an old basin refinished to bright white
Where
Wadeford (TA20)
Area hub
Somerset
Warranty
One year on every repair
Quote
From £350. Free and fixed, from your photos
Phone
0345 017 0787
Last updated
23 October 2026

Looking after it afterwards

Good habits make a big difference to how long a repair lasts. Here’s what we suggest:

  • Rinse off hair dye, oils and bath bombs straight away
  • Get any chip repaired quickly
  • A dripping tap should be fixed promptly
  • Use washing-up liquid and a soft cloth

Treat the new finish gently at first: give it the full curing time, then clean it gently. From then on, avoid abrasives and suction mats.

Worn enamel only gets rougher with time, and any rust spreads underneath. Resurfacing sooner means less repair work first.

Do you need bath re-enamelling in Wadeford?

Sometimes it’s an earlier resurfacing that has failed, lifting by the plughole or blistering. Failing coatings are stripped back before we resurface.

People usually call us when they notice one of these:

  • Brown or grey marks that do not clean off
  • An outdated colour you’d like to change
  • Lots of chips and rust spots
  • Worn patches where water runs and sits

What your quote should include

  • How long it needs to cure
  • A fixed price, and whether VAT is included
  • How the colour is matched
  • How your room will be protected

10 questions to ask before booking

Wadeford and nearby

Wadeford is about 1 mile north-west of Chard, in Somerset. Whether you’re in the middle of Wadeford or on the outskirts, the service is the same: a fixed price, a tidy visit and a guarantee. Wadeford is one of 640 towns and villages in Somerset we cover.

Every address in TA20 is covered, from the main roads to the quietest streets. Whether you live on Court Mill Lane, Clayhanger Lane and Rackstile or a nearby road, a technician can come to you. If you are just outside Wadeford, we cover Clayhanger (1 mile north-east), Combe St Nicholas (1 mile north-west), Chard (1 mile south-east), Chaffcombe (3 miles east) and Forton (3 miles south-east). We also work in nearby towns such as Taunton (10 miles north-west), Yeovil (15 miles east), Wellington (12 miles north-west), Crewkerne (8 miles east), Somerton (15 miles north-east) and Wilton (10 miles north-west).

Local landmarks in Wadeford

Locally, our jobs take us to homes close to Holyrood Academy, Church of St Nicholas and The Haymaker Inn and the streets around them. A little further out are Chard Community Hospital (1.6 miles south-east) and Chard Plumbing Museum (1.4 miles south). The countryside around Wadeford includes Bishopswood Meadows.

Map of Wadeford © OpenStreetMap contributors

Materials and what they mean for the repair

Roll-top and period baths

Freestanding roll-tops can be done inside and out, with the outside refinished as well.

Acrylic

Acrylic feels warm and is light, but it relies on good support. Repairs to cracks are reinforced from the back.

What happens on the day

A typical visit goes like this: we arrive on time, protect everything around the work area, carry out the work and clear up. Allow a full day from start to finish. Before leaving, we tell you when it can be used and what to avoid for the first few days.

  1. The bathroom is protected and ventilation set up.
  2. Old sealant is cut out and the bath is deep cleaned.
  3. We repair chips, rust spots and pitting.
  4. The surface is keyed and primed for the new finish.
  5. The new finish is sprayed on in several coats and left to cure until the day after.

How to prepare

  • Clear the area around the damage
  • Point us to the nearest place to park
  • Have a window or extractor fan available

How to get a price

Email us pictures of the damage and one of the whole item, with your TA20 postcode, and we will reply with a fixed price.

Get a free quote

Read more

Repairing versus replacing in Wadeford

Getting a cast iron bath out is hard work: it’s very heavy, may need breaking up, and the replacement can be costly. Resurfacing in place avoids that entirely. Resurfacing from £350, with every job priced individually. The price depends on the type and amount of damage, the material and how many jobs we combine into one visit. We give a fixed price from your pictures, so you know the cost before you book.

What you get with us

  • No extra charge for your area
  • Free fixed quotes from pictures
  • Dust sheets down, tidy finish
  • A year’s guarantee on all work

See our full price list or resurfacing vs replacement cost guide.

Your questions about bath re-enamelling in Wadeford

It’s been repaired before. Can you still fix it?

In most cases. The old repair comes out first, so mention it when you send photos.

When can you do it?

Your quote comes with available dates. If it’s urgent, say so and we will do what we can.

Will there be fumes?

A little, during the work. Ventilation keeps it down, and it fades as the finish cures.

How durable is a resurfaced bath?

Look after it and it lasts. Avoid abrasive cleaners and suction mats.

Can landlords book you?

We do, regularly. We quote for multiple addresses and fit around tenancy changeovers.

Is it OK to have pets in the house?

On the day, the room should be kept clear of pets and children, so the repair is not disturbed while it cures.

How much does bath re-enamelling cost in Wadeford?

Resurfacing from £350. We give a fixed quote based on pictures of the damage. Send a close-up of the damage and a wider photo and your postcode.

I rent my home. Can I book you?

Yes, though it’s best to check with your landlord first. Landlords are often glad to have it sorted before the end of a tenancy.

Prices and what affects them

Resurfacing from £350. You will not pay by the hour. The price depends on:

  • Unusual colours or finishes
  • Access to the area
  • How many items we do on one visit
  • The type of damage

A repair is priced on what needs doing, not your postcode. The full price is agreed before booking, with nothing added on the day.

Getting a price from pictures

A couple of clear pictures is all it takes. It helps if you send:

  • Daylight if possible, and no flash reflection
  • Your postcode, so we can check dates
  • A close-up of the damage, in focus
  • One picture of the whole bath

No survey visit is needed: we price from pictures. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through, and we’ll come back with a fixed figure.

Landlord and trade work in Wadeford

For developers and builders, we fix damage before handover. Several plots can be done in one visit to keep costs down.

Hospitality businesses need rooms back in use quickly, so most of our work is done in a single visit. We’ll fit around changeovers where we can.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.