North Somerset · England
Bath Re-enamelling in Cleeve
Our technicians come to Cleeve for full bath re-enamelling and resurfacing. Everything is done in place, and the work is guaranteed.
- Resurfacing from £350
- Wear marks under the taps
- A bath in a colour that no longer suits
Looking after it afterwards
A little care keeps the finish looking good. Our advice:
- Wipe the bath dry after use in hard water areas
- Don’t leave a chip unrepaired
- Stick to gentle, non-abrasive cleaners
- Repair dripping taps early
Give the finish its full curing time before using the bath. Then, gentle cleaning with a soft cloth is enough.
Do not try to scrub a worn bath back to shine. It just wears the enamel further.
Bath re-enamelling at your home in Cleeve
Many of the baths we re-enamel are period roll-tops, which would be difficult and expensive to replace. Doing them in place keeps an original feature. We regularly repair pressed steel baths, cast iron baths and basins & shower trays, and the jobs we see most are enamel that’s lost its shine and feels rough and thin, worn enamel in places.
A one-year guarantee comes as standard.
- Where
- Cleeve (BS49)
- Region
- North Somerset
- Warranty
- 12 months on all our work
- Price
- From £350. Fixed and free, based on photos
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
Work for landlords and builders
If you manage property in Cleeve, we’ll quote for several properties at once. Send photos for each one and we will come back with a combined price.
We regularly work with letting and managing agents. Just send pictures, the address and how to get access and we’ll handle the rest.
When a repair is not the answer
A repair isn’t right for every job, including:
- Problems we can’t see until an old finish comes off
- Holes rusted through the metal
- A poorly supported acrylic bath, until it’s firmed up
If in doubt, send photos and we’ll say what we think before booking.
Surfaces we repair
- Basins & shower trays
- Acrylic baths
- Pressed steel baths
- Victorian roll-tops
- Cast iron baths
How it works
Here’s how a visit normally runs: we arrive on time, protect everything around the work area, do the job and clear up. Allow a full day from start to finish. Before leaving, we tell you when it can be used and what to avoid for the first few days.
- First we look the bath over and confirm the finish.
- Taps, tiles and the floor are masked off.
- We degrease the bath, fix any damage and key the surface.
- Primer and finish coats are applied.
- The masking comes off, we tidy up and tell you when it can be used.
Getting ready for the visit
- Mention if the room is upstairs or in a flat
- Mention any earlier repairs or resurfacing
- Keep pets and children out of the room while we work
How to get a price
Most clients in Cleeve get their price from photos. Add a line about what happened and your postcode, and we will reply with a fixed quote and the earliest dates we have.
Related advice
Should I try a DIY kit first?
If you’ve already tried a DIY fix, that’s fine. We take the old repair out and do it properly, so it won’t stop us repairing it. It does add a little time, so tell us about it when you send pictures.
A kit can be fine for a tiny mark out of sight. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, it’s worth having it done properly.
Should you replace it?
When the bathroom is fine apart from the bath’s finish, resurfacing is the simplest answer. Tiles, panels and taps stay put. Our bath re-enamelling starts from £350. Most people are surprised how affordable a repair is, particularly next to the cost of replacement. Photos let us give you the exact figure.
Why us?
- Colour mixed on the day to match
- One price list for the whole UK
- A fixed quote before booking
- Most jobs done in one visit
Read our pricing and resurfacing vs replacement cost guide.
Prices and what affects them
Resurfacing from £350. There is no charge for travel to Cleeve. The price depends on:
- The colour and finish to match
- The type of damage
- What the surface is made of
- Where the damage is and how we get to it
Compared with replacing, repairing usually costs far less, because nothing has to be taken out, refitted or made good. Your fixed quote shows exactly what’s included.
Quotes from your pictures
Two or three clear photos are normally enough. It helps if you send:
- Where you are, by postcode
- A wider photo showing the whole bath
- Any details about the material
- Natural light rather than flash
Getting a quote takes a couple of minutes: take one close-up and one wider shot of the bath, include your postcode and send them to us. What comes back is a fixed price, not a guess.
Questions from Cleeve
How quickly can you book me in?
We’ll give you dates with your quote. If it’s urgent, say so and we will do what we can.
How do I book?
Use the quote form or ring 0345 017 0787, and we will take it from there.
Do you come to Cleeve?
Yes. We cover the whole UK and come to Cleeve. Send photos and we’ll quote, or call 0345 017 0787.
Do the materials smell?
Some materials have a smell while they’re applied. It clears as the materials cure.
How much does bath re-enamelling cost in Cleeve?
Prices start from £350. We give a fixed quote based on pictures of the damage. Send a close-up and a picture of the whole item with your BS49 postcode.
Do you work for landlords and businesses?
Yes. We carry out repairs for homeowners, landlords, letting agents, builders and businesses across North Somerset.
Can tenants book a repair?
Yes. Ask your landlord first, and we can send them the quote if that helps.
Is repairing better than replacing?
In most cases, yes. Replacement brings removal, refitting and making good, which a repair avoids. We’ll be honest if it’s not worth it.
What else we do in Cleeve
Do you need bath re-enamelling in Cleeve?
Enamel’s shine is only skin deep, and every scrub with an abrasive cleaner takes a little away. Eventually the surface turns porous and stains.
Get in touch if you’ve noticed any of these:
- Worn patches where water runs and sits
- Brown or grey marks that don’t clean off
- A coloured bath you want in white
- An old resurfacing that is failing
What to look for in a quote
- How soon you can use it again
- What aftercare is recommended
- How your room will be protected
- What happens if the damage is worse than the photos show
Covering Cleeve
Cleeve is about 3 miles south of Nailsea, in North Somerset. We travel to clients in Cleeve, so you do not need to take anything anywhere. Cleeve is one of 86 towns and villages in North Somerset we cover.
Postcode districts we cover here: BS49. From Woodview Drive, Cleeve Drive and Millier Road or anywhere nearby, we can come to you. Close by, we cover Claverham (1 mile north-west), Lower Claverham (1 mile north-west), Brockley (1 mile north-east), Udley (1 mile south) and Iwood (2 miles south). Larger places within reach include Weston-super-Mare (7 miles west), Portishead (7 miles north), Clevedon (4 miles north-west), Nailsea (3 miles north), Milton (7 miles west) and Worle (7 miles west).
Local landmarks in Cleeve
Around Cleeve, we work in homes near Court-De-Wyck Church School and Church of Holy Trinity, among other places. The closest station to Cleeve is Yatton station, roughly 1.9 miles west. A little further out are North Somerset Community Hospital (4.4 miles north-west). Not far away are Backwell Lake and Clapton Moor.
About our accreditations · Every repair comes with a one-year guarantee.
