Bath and North East Somerset · England
Bath re-enamelling & resurfacing in Iwood, Bath and North East Somerset
Local bath re-enamelling for Iwood: photo quotes, tidy work and a year’s guarantee.
- Resurfacing from £350
- A coloured bath you want in white
- A coating lifting around the plughole
Bath re-enamelling in Iwood, done in place
The bath stays where it is, so the taps, tiles and plumbing are not touched. Most baths are done in one visit, and can be used again the next day. We work on acrylic baths, pressed steel baths and cast iron baths, and people most often call us about several chips and rust patches and an original cast iron bath that needs restoring.
Whatever the size of the job, it’s backed by a one-year guarantee.
- Area
- Iwood (BS40)
- Region
- Bath and North East Somerset
- Cover
- 12 months on all our work
- Price
- From £350. Free, fixed quote from pictures
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
For landlords and businesses
Rental properties take more wear, and replacing things at every changeover adds up. A repair between tenancies is a cheaper way to keep the property in good order.
For anyone letting property in or around Iwood, we can repair and quote for several addresses together. Just send photos for each address and we will price them together.
What affects the price in Iwood
Resurfacing from £350. We don’t charge extra for travel to Iwood. The price comes down to:
- Whether it’s a chip, crack, burn or wear
- How much damage there is
- What the surface is made of
- Unusual colours or finishes
Instead of hourly rates, we fix the price before we start. It depends on the damage, the material and access, and combining items on one visit brings it down.
Quotes from your pictures
Good pictures mean an accurate price. Here’s what helps:
- Natural light rather than flash
- What it’s made of, if you know
- One sharp close-up of the damage
- One picture of the whole bath
Most clients in Iwood get their price from pictures. Tell us what happened and where you are, and we’ll reply with a fixed quote and the earliest dates we have.
What happens on the day
Once we’re through the door, we keep the work contained to the one room. Surfaces nearby are masked off, the job takes a full day, and we finish with a tidy-up and a look at the finished work together.
- First we protect the bathroom and set up ventilation.
- The bath is cleaned, degreased and any chips or rust repaired.
- We prepare the surface and apply a bonding primer.
- We spray on the new enamel finish in several coats.
- We leave it to cure, and it’s typically ready the following day.
Before we arrive
- Avoid using the area for a few hours before we arrive
- Keep a parking space free if you can
- Plan for the room to be out of bounds to pets and children
How to get a price
Ring 0345 017 0787, or send us photos through the quote form. With one close-up and one wider picture, we can price the job the same day in most cases.
Read more
When a repair is not the answer
To be straight with you, there are a few things a repair will not fix:
- Steel that has corroded right through
- A cast iron or steel bath that’s cracked right through
- Acrylic that moves when you stand in it
If in doubt, send photos and we’ll say what we think.
Surfaces we repair
- Acrylic baths
- Victorian roll-tops
- Basins & shower trays
- Cast iron baths
- Pressed steel baths
Iwood questions
Do you cover the whole of Bath and North East Somerset?
All of Bath and North East Somerset, and the rest of the UK. Travel is included in the price.
Is it safe with children and pets around?
Keep pets and children away from the work area on the day, mainly so nothing gets touched before it has cured.
Will you leave a mess?
We protect the room with dust sheets and masking first, and we clean up when we’ve finished.
I’m a tenant. Can you help?
We’re happy to deal with the tenant, landlord or agent. Just ensure the landlord agrees.
Do you come to Iwood?
Yes. We work across the UK and travel to Iwood. Send us photos for a fixed quote, or call 0345 017 0787.
Are you accredited?
Yes, including CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.
Is there a call-out fee?
Travel is included in the price, and we charge the same wherever you are.
How much does bath re-enamelling cost in Iwood?
Prices start from £350. We give a fixed price from your photos. Send a close-up of the damage and a wider photo and your postcode.
Materials and what they mean for the repair
Acrylic
Acrylic is light and warm to the touch, but it relies on good support. Cracks are strengthened from behind before the front is finished.
Roll-top and period baths
Freestanding roll-tops can be done inside and out, with the outside refinished as well.
Iwood and the surrounding area
Iwood is about 5 miles south of Nailsea, in Bath and North East Somerset. From the centre of Iwood to the outlying streets, we offer exactly the same service: fixed prices, tidy work and a one-year guarantee. Iwood is one of 136 places in Bath and North East Somerset where we work.
Our visits in BS40 work the same way as everywhere else we cover. If you’re just outside Iwood, we cover Udley (1 mile north-east), Stock (1 mile south), Wrington (1 mile east), Blackmoor (1 mile south-east) and Lower Langford (2 miles south-east). Larger places within reach include Keynsham (13 miles east), Paulton (13 miles east), Saltford (14 miles east), Timsbury (14 miles east), High Littleton (12 miles east) and Clutton (11 miles east).
Around Iwood
Our clients here include homes close to Wrington Church of England Primary School, Plough Inn and Church of All Saints. For rail, the closest station is Yatton station, roughly 2.6 miles north-west of the centre. Nearby you’ll also find Banwell Castle (4.1 miles south-west) and North Somerset Community Hospital (5.7 miles north-west). For a walk, there is Cadbury Hill and Backwell Lake.
DIY kit or professional repair?
If you do try a kit, read the instructions carefully and work on a clean, dry surface, and don’t use it until it has fully cured. If it fails, we can still put it right.
A DIY attempt isn’t a disaster. We remove the old filler and start again, so it does not stop a professional repair. Just mention it when you send pictures, as it can add time.
Other services in Iwood
Keeping it looking good
Once the work has cured, treat it gently:
- Have chips seen to early
- Wash away dyes and oils after use
- Keep toiletries on a shelf rather than in the bath
- Repair dripping taps early
Use mild, non-abrasive cleaners, avoid suction bath mats, and keep bottles and razors off the surface.
Avoid scrubbing a dull bath with abrasive cleaners. It just wears the enamel further and makes resurfacing more work.
What we are called out for in Iwood
In hard water areas, limescale and the cleaning it needs wear enamel faster, and gritty cleaners are the worst culprits.
People usually call us when they notice one of these:
- Chips and rust in more than one place
- A peeling or bubbling previous coating
- Wear marks under the taps
- A dull, rough surface that won’t come clean
Questions to ask before booking
- What happens if the damage is worse than the pictures show
- Who will actually do the work
- Whether the colour is mixed to match
- What preparation is included
About our accreditations · Every repair comes with a one-year guarantee.
