Bath and North East Somerset · England

Bath Re-enamelling in Udley

Bath re-enamelling across Udley and nearby, usually in one visit.

  • Resurfacing from £350
  • An outdated colour you’d like to change
  • Brown or grey marks that do not clean off
Surface Doctor technician refinishing the outside of a roll-top bath

Bath re-enamelling near Udley

About our bath re-enamelling in Udley

We resurface cast iron, steel and acrylic baths, including roll-tops and period baths. The finish is sprayed on in several coats over a bonding primer, once the bath has been cleaned, repaired and prepared. Common call-outs are for a coloured bath you want in white and a roll-top that’s seen better days, on basins & shower trays, acrylic baths and pressed steel baths.

You are covered for a year from the day of the repair. Just call us if there is a problem and we’ll come back.

Stained basin resurfaced to clean white (before and after)
Area
Udley (BS40)
Region
Bath and North East Somerset
Warranty
A year, on every repair
Quotes
From £350. Free, fixed price from pictures
Phone
0345 017 0787
Updated
23 October 2026

Repairs by material

Pressed steel

Under the enamel of a steel bath is thin metal. Once a chip exposes it, rust follows quickly, so we treat and seal the metal before filling.

Roll-top and period baths

Freestanding roll-tops can be done inside and out, with the outside refinished as well.

Common questions in Udley

Can you repair several things at once?

Yes. Combining jobs on one visit brings the cost down. Include photos of each item.

Can you resurface a pink bath in white?

Yes, white is the usual choice. Tell us what you’d like when you ask for a quote.

How long is the bath unusable?

Most baths are done in a day, ready the day after. We will confirm timings when we quote.

Can you do the outside of a roll-top?

Yes, often. We resurface the inside, and the outside can be refinished too.

Will the new finish last?

A well-prepared finish lasts a long time if it’s looked after. Gentle cleaning, no suction mats.

Does re-enamelling smell?

Yes, while we are applying the finish. Ventilation keeps it down, and it fades as the finish cures.

Do I have to be there?

Someone needs to let us in and show us the job. After that, you can carry on with your day.

Will you leave a mess?

No. The work area is masked and covered, and we take our waste away with us.

The process

You don’t need to empty the room. We bring everything we need with us, put protection down and get going once we have agreed what we’re doing. Most jobs take a full day, and you’re welcome to carry on with your day while we work.

  1. We mask and protect the room and ventilate it.
  2. Next we degrease the bath and fix chips and rust spots.
  3. We key the surface and put on a bonding primer.
  4. Several coats of new finish are sprayed on.
  5. We leave it to cure, and it’s normally ready the day after.

Getting ready for the visit

  • Ensure the area is dry
  • Clear toiletries, mats and anything else from around the area
  • Point us to the nearest place to park

Ask for a price

For a price in Udley, the easiest route is pictures: one close up, one from further back, plus your postcode. You’ll get a fixed quote with dates to choose from.

Send photos for a quote

Read more

Repair or replace: which is better?

Replacing the bath means a plumber, removing a heavy bath, re-tiling or making good the walls and days without a bathroom. Re-enamelling renews the entire surface without moving it. Prices start from £350. A few things move the price: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Photos let us give you a fixed figure.

Why book with us

  • Accredited with CHAS, Constructionline and SafeContractor
  • Every repair guaranteed for a year
  • Everything repaired in place
  • Same prices wherever you are

Read our full price list or resurfacing vs replacement cost guide.

Udley and the surrounding area

Udley is about 4 miles south of Nailsea, in Bath and North East Somerset. Jobs in Udley are booked in like any other job: a fixed quote from your pictures, and a technician at your door on the day. We cover all 136 towns and villages in Bath and North East Somerset.

We cover every part of the BS40 postcode area and the streets around it. Other places close to Udley include Iwood (1 mile south-west), Wrington (1 mile south-east), Stock (1 mile south), Cleeve (1 mile north) and Blackmoor (2 miles south). Larger places within reach include Keynsham (12 miles east), Paulton (13 miles east), Saltford (14 miles east), Timsbury (13 miles east), High Littleton (12 miles east) and Clutton (10 miles east).

What’s near Udley

Our clients here include homes close to Plough Inn, Wrington Church of England Primary School and Church of All Saints, among other places. For rail, the closest station is Yatton station, roughly 2.8 miles north-west of the centre. Well-known places in the area include Banwell Castle (4.6 miles south-west) and North Somerset Community Hospital (5.7 miles north-west). For a walk, there is Cadbury Hill and Backwell Lake.

Map of Udley © OpenStreetMap contributors

Prices and what affects them

Prices start from £350. You’ll know the full cost before booking. We look at:

  • How hard the colour is to match
  • Previous DIY repairs that have to come out
  • How easy the damage is to reach
  • Whether it’s a chip, crack, burn or wear

We charge the same wherever you are, so there is no premium for Udley. The job itself decides the price: the material, the amount of damage and how many items.

Quotes from your pictures

You can take the photos on your phone. Ensure they show:

  • Something in shot to show the size
  • A wider photo showing the entire bath
  • Natural light rather than flash
  • The postcode, so we can plan the visit

Upload a photo of the damage and a wider shot of the whole item, with your BS40 postcode, and we’ll reply with a fixed quote.

Honest limits

Some problems need a builder, plumber or fitter rather than us:

  • A bath split right through the body
  • A poorly supported acrylic bath, until it’s firmed up
  • Leaks from fittings rather than the bath

If in doubt, send pictures and we’ll say what we think.

Materials we work on in Udley

  • Basins & shower trays
  • Cast iron baths
  • Pressed steel baths
  • Acrylic baths
  • Victorian roll-tops

How to look after the repair

So the finish stays in good condition for years:

  • Keep toiletries on a shelf rather than in the bath
  • Rinse off hair dye, oils and bath bombs straight away
  • A dripping tap should be fixed promptly
  • Clean with a soft cloth and mild detergent

Wait for the curing time we give you before the first bath. After that, a soft cloth and washing-up liquid is all it needs.

Avoid scrubbing a dull bath with abrasive cleaners. It removes more of the surface and makes resurfacing more work.

DIY kit or professional repair?

What a professional repair adds is preparation, colour matching and finishing. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, then guarantee it for a year.

If you’ve already tried a DIY fix, that’s fine. We take the old repair out and do it properly, so it does not stop a professional repair. Just mention it when you send photos, as it can add time.

Landlords, agents and businesses in Udley

Builders, developers and site managers book us for snagging repairs, putting right damage done during fitting so nothing needs replacing. We hold CHAS, Constructionline and SafeContractor accreditations.

For developers and builders, we fix damage before handover, saving last-minute replacements. Several plots can be done in one visit.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.