North Somerset · England

Bath Re-enamelling for Lower Claverham homes

We travel to Lower Claverham for full bath re-enamelling and resurfacing. Nothing is taken out, with a one-year guarantee.

  • Resurfacing from £350
  • An original cast iron bath that needs restoring
  • A dull, rough surface that will not come clean
Surface Doctor technician refinishing the outside of a roll-top bath

Book bath re-enamelling in Lower Claverham

Bath re-enamelling at your home in Lower Claverham

If your bath is sound but looks tired, re-enamelling is usually the most cost-effective option. It avoids removal, plumbing and re-tiling. Typical jobs include stains that won’t shift and chips and rust in more than one place, in Victorian roll-tops, cast iron baths and pressed steel baths.

Whatever the size of the job, you get the same one-year guarantee in Lower Claverham and across North Somerset.

Roll-top bath being refinished by a Surface Doctor technician
Where
Lower Claverham (BS49)
County
North Somerset
Cover
A year, on every repair
Price
From £350. Free and fixed, from your photos
Telephone
0345 017 0787
Updated
23 October 2026

Looking after it afterwards

Once the work has cured, treat it gently:

  • Have chips seen to early
  • Stick to gentle, non-abrasive cleaners
  • Keep toiletries on a shelf rather than in the bath
  • Don’t let dyes or oils sit on the finish

Avoid hair dye, bath bombs and oils sitting on the surface, because they can mark the finish. Fix dripping taps quickly.

Worn enamel only gets rougher with time, and any rust spreads underneath. Acting earlier keeps the preparation simpler.

How the visit works

Your technician turns up at the time we agreed with you and checks the damage against your photos first. Dust sheets and masking tape go down before we open a single tin. Most visits take most of the day, and the room is left clean and tidy.

  1. We sheet, mask and ventilate the room.
  2. Old sealant is cut out and the bath is deep cleaned.
  3. Chips, rust and pitting are repaired.
  4. We key the bath and apply a bonding primer.
  5. The new finish is sprayed on in several coats and left to cure until the following day.

Before we arrive

  • Let the surface dry out before the visit
  • Point us to the nearest place to park
  • Open a window if you can

Getting a price

Pricing is simple: snap the damage close up and then the whole item, send them to us with your postcode, and you’ll get a fixed price back. Quotes are free and you are under no obligation.

Get a fixed quote

Related advice

Lower Claverham questions

Which areas do you work in?

We work UK-wide, so Lower Claverham is covered. Our prices are the same everywhere.

How long does re-enamelling take?

Most baths are done in a day and can be used the day after. We will confirm timings when we quote.

Can you repair something that’s been repaired before?

Most of the time. Let us know what was used before.

Can tenants book a repair?

Of course. Check with your landlord; we can send the quote to them too.

Is there a call-out fee?

There is no separate call-out charge. Your fixed quote includes everything.

Are you accredited?

We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.

Is there any odour?

There may be a mild smell during the work.

Does the bath have to be removed?

No. It’s re-enamelled where it stands, so nothing else is disturbed.

Repairing versus replacing in Lower Claverham

If the bath is sound, re-enamelling is generally much cheaper than replacing it, once you add removal, plumbing, tiling and decorating to the price of a new bath. It’s much quicker too. Prices start from £350. Rather than charging by the hour, we fix the price before we start. Damage, material and access decide it, and combining items on one visit brings it down.

What you get with us

  • One price list for the whole UK
  • A year’s guarantee on all work
  • Fixed prices from your pictures
  • Straight answers about what a repair can do

Take a look at our pricing or resurfacing vs replacement cost guide.

Work for landlords and builders

Housing associations and facilities teams use us for planned and reactive repairs. Repairing in place avoids the disruption of a replacement, which is easier on the people living there.

If you manage property in Lower Claverham, we can repair and quote for several addresses together. Send photos for each one and we’ll price them together.

What a repair can’t fix

Some problems need a builder, plumber or fitter rather than us:

  • A bath that is rusted through
  • A metal bath with a through crack
  • Acrylic that moves when you stand in it

Send us photos and we will tell you honestly before you book.

Surfaces we repair

  • Pressed steel baths
  • Basins & shower trays
  • Cast iron baths
  • Victorian roll-tops
  • Acrylic baths

What affects the price in Lower Claverham

Prices start from £350. There is no area surcharge for Lower Claverham. What changes the price is:

  • How hard the colour is to match
  • Whether we combine several jobs
  • What the surface is made of
  • Whether it’s a chip, crack, burn or wear

A repair usually costs much less than people expect, especially compared with replacing and refitting. Send photos and we’ll give you the exact figure.

Getting a price from photos

Photographing the damage takes a minute, and it saves a visit. Try to send:

  • Good light, ideally daylight, without flash glare
  • Details of any past repairs
  • Something in shot to show the size
  • A clear, close picture of the problem area

If you’re in Lower Claverham and want a price, the easiest route is pictures: a close-up, a wider shot and your postcode. We reply with a fixed quote and our next available dates.

Do you need bath re-enamelling in Lower Claverham?

A dull surface stains and holds dirt, and cleaning harder only makes it worse. That’s the point where re-enamelling makes sense.

Look out for these signs:

  • A coloured bath you want in white
  • Several chips and rust patches
  • Enamel that is lost its shine and feels rough
  • Stains that won’t shift

Before you book anyone

  • How long the guarantee is and what it covers
  • What prep work is covered
  • How long it needs to cure
  • What aftercare is recommended

Our hiring checklist

Covering Lower Claverham

Lower Claverham is about 3 miles south-west of Nailsea, in North Somerset. Anywhere in BS49, a technician comes to you. We work in all 86 towns and villages in North Somerset, from the larger towns to small villages.

Here we cover the BS49 postcode area. Local streets include Lower Claverham and Jasmine Lane, and we cover them all. Nearby, we also work in Claverham (1 mile south), Cleeve (1 mile south-east), Brockley (1 mile east), Udley (2 miles south) and Iwood (3 miles south). We also work in nearby towns such as Weston-super-Mare (7 miles south-west), Portishead (6 miles north), Clevedon (3 miles north-west), Nailsea (3 miles north-east), Milton (7 miles south-west) and Worle (6 miles south-west).

Around Lower Claverham

We visit homes around Court-De-Wyck Church School and Church of St Barnabas and the streets around them. The nearest railway station is Yatton station, roughly 1.5 miles south-west. Well-known places in the area include North Somerset Community Hospital (3.4 miles north-west). Not far away are Clapton Moor and Backwell Lake.

Map of Lower Claverham © OpenStreetMap contributors

Different materials, different repairs

Roll-top and period baths

We can resurface a roll-top inside and out, with the outside refinished as well.

Cast iron

A cast iron bath is heavy enough that most people never want to move it. The enamel is the part that wears or chips, and that is what we repair.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.