North Yorkshire · England
Bath re-enamelling & resurfacing in Cliffe, North Yorkshire
Fixed-price bath re-enamelling in Cliffe and the surrounding area, done in a single visit in most cases.
- Resurfacing from £350
- Several chips and rust patches
- A bath that stays dull however much you clean it
Why repair rather than replace?
Replacement only makes sense in a few cases: a cracked-through bath, a change of size or shape, or a full refit. In most other cases, resurfacing is the better choice. Resurfacing from £350, with every job priced individually. Set against the cost of replacement, a repair is generally a fraction of the price, because there is no removal, plumbing or making good. The quote lists exactly what you are paying for.
Why Cliffe customers choose us
- Honest advice, even when it means no job
- Nothing taken out or refitted
- One visit for most repairs
- Rooms protected and left tidy
Read our prices page or resurfacing vs replacement cost guide.
Bath re-enamelling in Cliffe, done in place
The bath stays where it is, so your taps, tiles and plumbing are left alone. It typically takes one visit, and can be used again the following day. Typical jobs include an outdated colour you’d like to change and worn patches where water runs and sits, across Victorian roll-tops, acrylic baths and pressed steel baths.
The work is covered for a year after we finish. If anything isn’t right, ring us and we will sort it.
- Area
- Cliffe (YO8)
- Region
- North Yorkshire
- Cover
- One year on every repair
- Quote
- From £350. Free, fixed price from pictures
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
More services for Cliffe
Should I try a DIY kit first?
DIY kits are sold for most surfaces, and they can tidy up a tiny mark. The trouble is colour and preparation: they come in a handful of shades, and if the surface isn’t prepared the repair will not last.
The difference between a kit and a professional repair is mostly in the preparation and colour. We prepare the area properly, mix the colour on site and polish the finish to match, and the work is guaranteed.
What we are called out for in Cliffe
Hard water speeds up the wear, and gritty cleaners are the worst culprits.
Typical reasons for a call-out include:
- A dull, rough surface that won’t come clean
- Staining under the taps and around the waste
- An original cast iron bath that needs restoring
- A coloured bath you want in white
Comparing quotes
- Whether the price covers travel
- How the colour is matched
- A fixed quote, and whether VAT is included
- What preparation is included
Repairs by material
Cast iron
A cast iron bath is heavy enough that most people never want to move it. Only the enamel surface wears or chips, and that is what we repair.
Pressed steel
Pressed steel baths take a new finish well, once any rust has been treated. Rust around the waste is common on steel, so we check it carefully.
Keeping it looking good
How the surface is treated afterwards matters:
- Don’t leave bottles, razors or sponges standing on the surface
- Wash away dyes and oils after use
- Avoid suction-cup mats
- A quick wipe after use keeps limescale away
Dry the bath after use if possible, and rinse away any product left on the surface.
Worn enamel only gets rougher with time, and any rust spreads underneath. Acting earlier keeps the preparation simpler.
Work for landlords and builders
Hotels, guest houses and holiday lets need rooms back in use quickly, so most of our work is done in a single visit. We can work around your bookings.
We also carry out snagging repairs for builders and developers, putting right damage done during fitting so nothing needs replacing. We’re CHAS, Constructionline and SafeContractor accredited.
Cliffe questions
Do you hold any accreditations?
We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.
Can you do more than one item on the same visit?
Yes, and it’s frequently cheaper. Send pictures of everything together and you will get one combined price.
Do you work in Cliffe?
Yes, we do. Technicians travel to Cliffe from across the region, and the price is the same as everywhere else.
How long does re-enamelling take?
One day for most baths and can be used the day after. We’ll confirm timings when we quote.
Can you quote from pictures?
Normally, yes. A close-up and a wider photo are enough to give a fixed price.
Do the materials smell?
Some materials have a smell while they’re applied. It fades as everything cures.
How much does bath re-enamelling cost in Cliffe?
Prices start from £350. We give a fixed quote based on photos of the damage. Send a close-up of the damage and a wider photo with your YO8 postcode.
Do you need to take the bath out?
No. We resurface it in place, so nothing else is disturbed.
What bath re-enamelling costs
Prices start from £350. Each job gets its own fixed quote. This is what makes a difference:
- How hard the colour is to match
- How many areas need work
- The material
- Whether it’s a chip, crack, burn or wear
Every job is a little different, so each one is priced on its own. The size and type of damage, the material and access all make a difference, and combining jobs on one visit brings the cost down.
How to get a fixed quote
Most quotes are done from photos alone. To help us price it:
- A coin beside the damage so we can judge size
- One sharp close-up of the damage
- Good light, ideally daylight, without flash glare
- Where you are, by postcode
Getting a price is easy: snap the damage close up and then the whole item, send them to us with your postcode, and you will get a fixed quote back. There’s no charge for the quote and no obligation.
What we do, step by step
There is not much you need to do on the day. Let us in and show us the room, and we will take it from there. The job generally runs to most of the day, including clearing up.
- We check the bath and agree the finish with you.
- Taps, tiles and the floor are masked off.
- We degrease the bath, fix any damage and key the surface.
- We apply the primer and then the finish coats.
- We remove the masking, tidy up and give you the curing time.
Getting ready for the visit
- Mention if the room is upstairs or in a flat
- Let us know about parking or access
- Let us know if it has been repaired before
Get a quote
The quickest way to a price is to send a couple of pictures using our quote form or ring us. We’ll say straight away whether it can be repaired.
Read more
Our work in Cliffe
Cliffe is about 3 miles east of Selby, in North Yorkshire. Jobs in Cliffe are booked in like any other job: a fixed quote from photos, then a visit to do the work. Cliffe is one of 626 towns and villages in North Yorkshire where we work. Our nearest city page is Leeds, about 23 miles away.
Postcode districts we cover here: YO8. From Station Lane, Oxen Lane and Station View or a nearby road, we can come to you. Neighbouring places we cover include Cliffe Common (1 mile north), South Duffield (1 mile north-east), Hemingbrough (1 mile south-east), Woodhall (2 miles east) and Barmby on the Marsh (3 miles south-east). Further out, we also cover Selby (3 miles west), Tadcaster (13 miles north-west), Brayton (4 miles west), Thorpe Willoughby (5 miles west), Hambleton (7 miles west) and Cawood (7 miles north-west).
Near you in Cliffe
Our clients here include homes close to Barlby High School, Cliffe Voluntary Controlled Primary School and St. Andrew. The closest station to Cliffe is Selby station, roughly 2.8 miles west. Well-known places in the area include Duffield Castle (3.6 miles north-east) and Menthorpe cum Bowthorpe (2.2 miles north-east). The countryside around Cliffe includes Skipwith Common.
About our accreditations · Every repair comes with a one-year guarantee.
