Neath Port Talbot · Wales

Bath re-enamelling & resurfacing in Clyne, Neath Port Talbot

Full bath re-enamelling and resurfacing for homes and businesses in Clyne and across Neath Port Talbot. Send pictures for a free, fixed quote.

  • Resurfacing from £350
  • An old resurfacing that’s failing
  • An original cast iron bath that needs restoring
Surface Doctor technician refinishing the outside of a roll-top bath

Book bath re-enamelling in Clyne

Bath re-enamelling at your home in Clyne

We don’t move the bath, so your taps, tiles and plumbing are left alone. It usually takes one visit, with the bath ready to use the following day. Our repair technicians work on Victorian roll-tops, acrylic baths and basins & shower trays, and people most often call us about a coloured bath you want in white and thin, worn enamel in places.

The work is covered for a year after we finish. If anything isn’t right, ring us and we will sort it.

Location
Clyne (SA11)
Region
Neath Port Talbot
Warranty
12 months on all our work
Quotes
From £350. Fixed and free, based on pictures
Phone
0345 017 0787
Updated
23 October 2026
Surface Doctor technician refinishing the outside of a roll-top bath

Repair or replace in Clyne?

A refit takes several trades and several days. Resurfacing is one technician, normally in a day, with the bath ready the following day. Resurfacing from £350, with every job priced individually. No two jobs are quite the same, so each one is priced on its own. What’s damaged, how badly and how easy it is to reach all make a difference, and combining jobs on one visit brings the cost down.

What you get with us

  • Dust sheets down, tidy finish
  • One-year guarantee on every repair
  • We’ll tell you if it’s not worth repairing
  • Most jobs done in one visit

See our pricing and resurfacing vs replacement cost guide.

What we can’t put right

We will not take on work that will not last, so here’s what a repair can’t put right:

  • Leaking taps or wastes (a plumber’s job)
  • Damage hidden under a previous coating, until it’s stripped back
  • A cast iron or steel bath that is cracked right through

If in doubt, send photos and we’ll say what we think.

Materials we work on in Clyne

  • Pressed steel baths
  • Victorian roll-tops
  • Cast iron baths
  • Basins & shower trays
  • Acrylic baths

For landlords and businesses

For anyone letting property in or around Clyne, we’ll quote for several properties at once. Just send pictures for each address and we will price them together.

Hospitality businesses need rooms back in use quickly, so we keep visits short and tidy. We can work around your bookings.

What we do, step by step

Expect a friendly, tidy visit. We agree the arrival time in advance, cover and mask the work area, and get on with the job, which normally takes the best part of a day. If anything looks different from your pictures, we will talk to you before going ahead.

  1. First we protect the bathroom and set up ventilation.
  2. Next we degrease the bath and fix chips and rust spots.
  3. We key the surface and put on a bonding primer.
  4. Several coats of new finish are sprayed on.
  5. Once cured, normally by the day after, the bath is ready.

Before we arrive

  • Tell us about parking, stairs or access
  • Plan for the room to be out of bounds to pets and children
  • Let us know if it has been repaired before

Getting a price

No survey visit is needed: we price from pictures. Use the quote form, or ring 0345 017 0787 to talk it through, and you will get a fixed figure back.

Get a fixed price

Advice

What bath re-enamelling costs

Prices start from £350. We price every job individually. What matters most is:

  • How easy the damage is to reach
  • How many areas need work
  • Any earlier repairs that need removing first
  • Doing more than one item at once

What it costs depends on the type and amount of damage, the material and how many jobs we combine into one visit. We give a fixed quote from your pictures, so there are no surprises on the day.

Send pictures for a quote

Before you send photos, these tips help us give you a firm price:

  • One picture of the whole bath
  • Any earlier repairs or coatings
  • Any details about the material
  • Good light, ideally daylight, without flash glare

Most customers in Clyne get their price from photos. Add a line about what happened and your postcode, and we’ll send back a fixed quote and some dates.

Do you need bath re-enamelling in Clyne?

By the time a bath is a few decades old, it may have a mix of issues: dull areas, chips, rust and staining. Re-enamelling deals with all of them in one go.

Send us a photo if you notice any of these:

  • Enamel that is lost its shine and feels rough
  • Brown or grey marks that don’t clean off
  • A period or roll-top bath worth keeping
  • A coloured bath you want in white

What to look for in a quote

  • Whether the price covers travel
  • Is the price fixed, and does it include VAT?
  • Aftercare advice
  • Who will actually do the work

How to compare quotes

FAQs for Clyne

Do I have to be there?

We need someone to let us in. After that, you can carry on with your day.

Will there be a smell?

There may be a mild smell during the work, which fades afterwards.

Can pets and children be at home?

Keep pets and children away from the work area on the day.

Is it worth repairing rather than replacing?

Usually, if the item is otherwise sound. A repair avoids removal and making good. We will tell you honestly if replacement makes more sense.

Will the price change on the day?

If we find something the pictures didn’t show, we explain it first. You decide whether to go ahead.

Does re-enamelling smell?

Yes, while we are applying the finish. Ventilation keeps it down, and it fades as the finish cures.

Can you price it without visiting?

In nearly every case. We only ask to see it in person if the pictures can’t show what we need.

Can you change the colour of my bath?

Yes. Coloured baths can be resurfaced in white, and we can do the rest of the suite as well.

Our work in Clyne

Clyne is about 4 miles north-east of Neath, in Neath Port Talbot. Customers in Clyne get the same service as everywhere else we cover: a fixed quote from pictures, and a technician at your door on the day. Our repair technicians cover 100 places across Neath Port Talbot, from the larger towns to small villages.

We work across the SA11 postcode area. Local streets include Maes Pwll, Lletty Dafydd and Ynys-yr-Afon. We also cover the places around Clyne: Aberdulais (2 miles south-west), Cil-ffriw (2 miles west), Tonna (2 miles south-west), Michaelston (3 miles south) and Tonmawr (3 miles south). Within a short drive, we also cover Neath (4 miles south-west), Port Talbot (7 miles south), Sandfields (8 miles south-west), Mount Pleasant (4 miles south-west), Baglan Moors (7 miles south-west) and Sandfields West (8 miles south-west).

What’s near Clyne

We visit homes around Rock & Fountain Inn and the streets around them. For rail, the closest station is Neath station, about 4 miles south-west of the centre. A little further out are Tonna Hospital (1.8 miles south-west) and Neath Museum (3.8 miles south-west). Open spaces near Clyne include Gnoll Estate Country Park lake 1 and Mynydd Blaenafon.

  • Other local spots include Neath Lower (0.7 miles north-west)
Map of Clyne © OpenStreetMap contributors

Looking after it afterwards

Much of the damage we repair could have been avoided. A few tips:

  • Respect the curing time we give you
  • Don’t leave a chip unrepaired
  • Don’t leave bottles, razors or sponges standing on the surface
  • Avoid suction-cup mats

Give the finish its full curing time before using the bath. After that, a soft cloth and washing-up liquid is all it needs.

If a previous coating is starting to peel, do not pick at it. Water gets under it and the damage spreads, so have it stripped and resurfaced.

Different materials, different repairs

Roll-top and period baths

We can resurface a roll-top inside and out, and the outside can be refinished too.

Acrylic

We resurface acrylic baths as well, with a coating system suited to acrylic. It must be solid and not flex underfoot for the finish to last.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.