Telford and Wrekin · England
Bath Re-enamelling in Coalmoor
Problem with your bath in Coalmoor? We repair it in place, match it on site and back it with a one-year guarantee.
- Resurfacing from £350
- Lots of chips and rust spots
- A coating lifting around the plughole
The process
We agree an arrival time beforehand, so you know when to expect us. Once we’re there, the work takes a full day for most jobs. The room is left tidy and you’ll know when it can be used.
- First we protect the bathroom and set up ventilation.
- Next we degrease the bath and fix chips and rust spots.
- We key the surface and put on a bonding primer.
- We spray on the new enamel finish in several coats.
- Once cured, normally by the next day, the bath is ready.
Before we arrive
- Clear the area around the damage
- Plan for the room to be out of bounds to pets and children
- Tell us if there are stairs or a lift
Ask for a price
Email us a picture of the damage and one of the entire item, and tell us you’re in Coalmoor, and we will reply with a fixed price.
Advice
Bath re-enamelling at your home in Coalmoor
If your bath is sound but looks tired, resurfacing is normally the best value. There’s no removal, plumbing or tiling involved. Common call-outs are for a bath in a colour that no longer suits and a coating lifting around the plughole, across acrylic baths, Victorian roll-tops and cast iron baths.
Big or small, it’s backed by a one-year guarantee.
- Location
- Coalmoor (TF4)
- County
- Telford and Wrekin
- Guarantee
- 12 months on all our work
- Quote
- From £350. Free, fixed price from pictures
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
Common problems we fix in Coalmoor
By the time a bath is a few decades old, it may have a mix of issues: worn patches, chips, rust spots and stains. Re-enamelling deals with all of them in one go.
Typical reasons for a call-out include:
- Enamel that’s lost its shine and feels rough
- A coloured bath you want in white
- Lots of chips and rust spots
- Stains that won’t shift
Before you book anyone
- How the colour is matched
- Whether there are any call-out or travel charges
- What happens if the damage is worse than the pictures show
- How your room will be protected
What your bath is made of matters
Acrylic
Acrylic feels warm and is light, but it relies on good support. Cracks are strengthened from behind before the front is finished.
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Once a chip exposes it, rust follows quickly, so the metal is treated and sealed before the repair.
Aftercare tips
After the repair has cured, a few habits help it last:
- Store bottles off the bath
- Rinse off hair dye, oils and bath bombs immediately
- Don’t leave a chip unrepaired
- Respect the curing time we give you
Avoid hair dye, bath bombs and oils sitting on the surface, as they can stain. Repair dripping taps promptly.
Avoid scrubbing a dull bath with abrasive cleaners. It removes more of the surface.
Landlords, agents and businesses in Coalmoor
If you manage property in Coalmoor, we will quote for several properties at once. Send photos for each one and we will come back with a combined price.
Rental properties take more wear, and replacing items every time a tenant leaves is expensive. Repairing between tenants keeps the property presentable for less.
Can I fix it myself?
If you’ve already tried a DIY fix, that is fine. We remove the old filler and start again, so it won’t stop us repairing it. It does add a little time, so tell us about it when you send pictures.
It’s tempting to reach for a kit, but the repairs we redo most often are DIY ones that have discoloured or lifted. Getting it right first time is normally cheaper.
Questions from Coalmoor
Do you work in Coalmoor?
Yes. We work across the UK and travel to Coalmoor and the rest of Telford and Wrekin. Send us photos for a fixed quote, or call 0345 017 0787.
How long is the bath unusable?
Generally a day, then it’s ready to use the following day. A badly pitted bath can need a second day.
Is there any odour?
A little, depending on the job. Open windows and an extractor fan help, and it soon fades.
Are there extra charges for Coalmoor?
No. Our quotes include travel, with the same prices everywhere we work.
What does bath re-enamelling cost?
Prices start from £350. We give a fixed quote based on pictures of the damage. Send a close-up and a photo of the entire item and your postcode.
Can you change the colour of my bath?
Yes, most people go for white. Tell us what you’d like when you ask for a quote.
Do you work for landlords and businesses?
Yes. We work for landlords, agents, builders and businesses as well as householders in Coalmoor.
Do I need to be at home?
We need someone to let us in. After that, you can carry on with your day.
Other services in Coalmoor
Where we work around Coalmoor
Coalmoor is about 3 miles south-west of Telford, in Telford and Wrekin. Jobs in Coalmoor are booked in like any other job: a fixed price from your pictures, then a visit to do the work. We cover all 79 towns and villages across Telford and Wrekin. We work right across the region, from Coalmoor to Birmingham (29 miles away).
Jobs in TF4 are booked in the same way as anywhere else. We also cover the places around Coalmoor: Little Wenlock (1 mile west), Buildwas (2 miles south-west), Cluddley (3 miles north-west), Wyke (3 miles south) and Leighton (3 miles west). Within a short drive, we also cover Telford (3 miles north-east), Wellington (3 miles north), Oakengates (3 miles north-east), Newport (9 miles north-east), St George’s (4 miles north-east) and Priorslee (4 miles north-east).
Landmarks near Coalmoor
Locally, our jobs take us to homes close to Lightmoor Village Primary School, The Telford Langley School and Church of St Lawrence. The closest station to Coalmoor is Telford Central station, roughly 3 miles north-east of the centre. Well-known places in the area include Princess Royal Hospital (3.8 miles north) and New Coracle Shed (1.7 miles south). For a walk, there’s The Ercall.
Prices and what affects them
Prices start from £350. Every quote is fixed and free. What we take into account:
- The material
- Whether it’s a chip, crack, burn or wear
- The colour and finish to match
- How many items we do on one visit
Instead of hourly rates, we fix the price before we start. It depends on the damage, the material and access.
Getting a price from photos
Good pictures mean an accurate price. Here’s what we find most useful:
- A photo taken from further back
- Something in shot to show the size
- Any earlier repairs or coatings
- Daylight if possible, and no flash reflection
The quickest way to a price is to send two or three pictures through our quote form or call us. We will say straight away if a repair is the right fix.
When a repair isn’t the answer
A few problems are outside what a surface repair can do:
- Steel that has corroded right through
- A poorly supported acrylic bath, until it’s firmed up
- Damage hidden under a previous coating, until it’s stripped back
Not sure? Send photos and we will give you a straight answer.
What we work on
- Victorian roll-tops
- Basins & shower trays
- Pressed steel baths
- Acrylic baths
- Cast iron baths
About our accreditations · Every repair comes with a one-year guarantee.
