Shropshire · England
Bath re-enamelling & resurfacing in Wyke, Shropshire
Full bath re-enamelling and resurfacing at your home in Wyke, with a one-year guarantee on every repair.
- Resurfacing from £350
- Stains that will not shift
- Several chips and rust patches
What bath re-enamelling costs
Resurfacing from £350. Every quote is fixed and free. What we look at:
- The size and number of damaged areas
- The material and finish
- How many items we do on one visit
- The type of damage
We charge the same wherever you are, so there’s no premium for Wyke. What changes the price is the job itself: the material, the amount of damage and how many items.
Quotes from your photos
A couple of clear pictures is all it takes. It helps if you send:
- Good light, ideally daylight, without flash glare
- A close-up of the damage, in focus
- One picture of the whole bath
- Any details about the material
The quickest way to a price is to send a couple of photos using our quote form or call us. We will say immediately whether it can be repaired.
Bath re-enamelling in Wyke without replacing anything
After cleaning, repairing and priming, we spray on the new finish. Most of the work, and most of the durability, is in the preparation, and we take our time over it. We regularly repair Victorian roll-tops, cast iron baths and acrylic baths, and common reasons people get in touch are several chips and rust patches and thin, worn enamel in places.
We stand behind the work with a one-year guarantee.
- Location
- Wyke (TF13, TF12)
- County
- Shropshire
- Warranty
- A year, on every repair
- Quotes
- From £350. Free, fixed price from pictures
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
Different materials, different repairs
Acrylic
We resurface acrylic baths as well, with a coating system suited to acrylic. It must be solid and not flex underfoot.
Cast iron
A cast iron bath is heavy enough that most people never want to move it. The enamel is the part that wears or chips, and that is what we repair.
DIY kit or professional repair?
Kits are cheap and easy to find, but the repairs we redo most often are DIY ones that have discoloured or lifted. Getting it right first time is usually cheaper.
The difference between a kit and a professional repair is mostly in the preparation and colour. We prepare the area properly, mix the colour on site and polish the finish to match, then guarantee it for a year.
How to care for the repair
Looking after the surface is easy:
- A dripping tap should be fixed promptly
- A quick wipe after use keeps limescale away
- Get any chip repaired quickly
- Never use suction bath mats
The first few days matter most: let it cure fully, then use mild cleaners only. From then on, avoid abrasives and suction mats.
If a previous coating is starting to peel, do not pick at it. Moisture gets underneath and makes it worse, so have it stripped and resurfaced.
Common questions in Wyke
What if the damage is worse than the photos show?
The price is fixed for what the photos show. If there’s more, we will tell you before starting.
Can a failed resurfacing be redone?
In most cases. The old coating comes off before we resurface it. Tell us about it when you ask for a quote.
I’m a tenant. Can you help?
Of course. Ask your landlord first, and we can send them the quote if that helps.
Can landlords book you?
Yes. We work for landlords, agents, builders and businesses as well as householders.
Are there extra charges for Wyke?
We do not add a call-out fee. The fixed quote covers the visit and the work.
Can pets and children be at home?
Just keep them out of the work area. We’ll let you know when it’s safe to use again.
How much does bath re-enamelling cost in Wyke?
Resurfacing from £350. Every job gets a fixed price based on photos of the damage. Send a close-up of the damage and a wider photo and your postcode.
Can you re-enamel a roll-top bath?
Yes. Inside and out.
Repair or replace in Wyke?
A new bath means a plumber, removing a heavy bath, making good the walls and tiles and days without a bathroom. Re-enamelling renews the whole surface without moving it. Prices start from £350. Compared with replacing, repairing generally costs far less, because nothing has to be taken out, refitted or made good. Your fixed quote shows exactly what’s included.
What you get with us
- No need to remove anything
- Colour-matched on site
- Free fixed quotes from pictures
- Work done at your home or business
Read our prices page or guide to resurfacing and replacement costs.
What happens on the day
Expect a friendly, tidy visit. We confirm the time with you beforehand, cover and mask the work area, and get on with the job, which normally takes a full day. If anything looks different from your photos, we will talk to you before going ahead.
- We mask and protect the room and ventilate it.
- We clean and degrease the bath and repair any chips or rust.
- The surface is prepared and a bonding primer applied.
- We spray on the new enamel finish in several coats.
- We leave it to cure, and it’s generally ready the following day.
Before we arrive
- Open a window if you can
- Tell us if there are stairs or a lift
- Mention any earlier repairs or resurfacing
Getting a price
For most jobs, photos are all we need to give you a price. Tell us what happened and where you are, and we will send back a fixed quote and some dates.
Advice
When to call us in Wyke
Hard water speeds up the wear, and abrasive cleaners do the most damage.
It’s worth getting a quote if you see:
- An original cast iron bath that needs restoring
- A bath that stays dull however much you clean it
- A peeling or bubbling previous coating
- Several chips and rust patches
Comparing quotes
- How the room is protected while they work
- How to look after the finish
- Whether there are any call-out or travel charges
- The length of the guarantee and what it covers
When we would advise against a repair
In fairness, there are a few things a repair won’t fix:
- A bath that is rusted through
- A metal bath with a through crack
- Damage hidden under a previous coating, until it’s stripped back
Send us photos and we’ll tell you honestly.
Materials we work on in Wyke
- Victorian roll-tops
- Pressed steel baths
- Acrylic baths
- Basins & shower trays
- Cast iron baths
Wyke and nearby
Wyke is about 3 miles south-west of Madeley, in Shropshire. Anywhere in TF13, we come to you. Wyke is one of 433 towns and villages in Shropshire we cover. Our nearest city page is Birmingham, about 28 miles away.
Our repair technicians cover all of the TF13 and TF12 postcode area. If you are just outside Wyke, we cover Posenhall (1 mile east), Farley (1 mile west), Buildwas (2 miles north), Homer (2 miles west) and Leighton (3 miles north-west). We also work in nearby towns such as Shrewsbury (11 miles north-west), Madeley (3 miles north-east), Bridgnorth (7 miles south-east), Coleham (11 miles north-west), Kingsland (12 miles north-west) and Belle Vue (11 miles north-west).
Around Wyke
Typical jobs here are in homes near William Brookes School and the streets around them. A little further out are Broseley Pipeworks (1.5 miles east). Not far away are The Ercall.
Other services in Wyke
About our accreditations · Every repair comes with a one-year guarantee.
