Telford and Wrekin · England
Bath re-enamelling & resurfacing in Little Wenlock, Telford and Wrekin
Full bath re-enamelling and resurfacing in Little Wenlock, carried out at your home and guaranteed for a year.
- Resurfacing from £350
- A coloured bath you want in white
- An original cast iron bath that needs restoring
How we handle bath re-enamelling in Little Wenlock
A re-enamelled bath looks and feels like a new one, but without the cost and upheaval of a refit. It’s ideal if you like your bathroom but not the state of the bath. Typical jobs include lots of chips and rust spots and enamel that’s lost its shine and feels rough, across cast iron baths, Victorian roll-tops and pressed steel baths.
Your repair is guaranteed for a year, as with every job we do.
- Where
- Little Wenlock (TF6)
- County
- Telford and Wrekin
- Guarantee
- A year, on every repair
- Price
- From £350. Free, fixed price from pictures
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
When to call us in Little Wenlock
A dull surface stains and holds dirt, and cleaning harder only makes it worse. At that stage, resurfacing is the fix.
Send us a photo if you notice any of these:
- Thin, worn enamel in places
- A roll-top that’s seen better days
- A bath in a colour that no longer suits
- A peeling or bubbling previous coating
Before booking anyone
- What protection goes down before work starts
- What preparation is included
- What the guarantee covers, and for how long
- A fixed price, and whether VAT is included
Also in Little Wenlock
For landlords and businesses
We work for landlords, letting agents and housing providers in Little Wenlock as well as householders. A repair between tenants keeps the property empty for less time, and it generally costs far less than a refit.
We carry out planned and one-off repairs for housing associations and facilities teams in Telford and Wrekin and across the UK. Repairing in place avoids the disruption of a replacement, which matters when someone is living in the home.
Repairs by material
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. Only the enamel surface wears or chips, and that is what we repair.
Acrylic
Acrylic is light and warm to the touch, but it relies on good support. Cracks are strengthened from behind before the front is finished.
Keeping it looking good
Once the work has cured, treat it gently:
- Repair dripping taps early
- Rinse off hair dye, oils and bath bombs right away
- Get any chip repaired quickly
- Avoid suction-cup mats
Stick to mild, non-abrasive cleaners, avoid suction bath mats, and keep bottles and razors off the surface.
Avoid scrubbing a dull bath with abrasive cleaners. It removes more of the surface and makes resurfacing more work.
Little Wenlock: your questions answered
Will the bath be moved?
Not at all. We work on the bath in place, with the room protected and ventilated.
What happens after I send pictures?
We come back with a fixed price, typically with dates to choose from. You are under no obligation.
Is there a smell?
There is some smell while the coating is applied, so we ventilate the room. It clears as the finish cures.
Does someone need to be in?
Yes. We need access to the room while we work, at a time we agree with you.
It’s been repaired before. Can you still fix it?
In most cases. The old repair comes out first, so let us know about it.
Can I get a quote without a visit?
Nearly always. If pictures don’t show enough, we will ask for another angle.
Do you cover Little Wenlock?
We do. Technicians travel to Little Wenlock from across the region, and the price is the same as everywhere else.
How soon can you come?
That depends on our diary for your area. We’ll offer you dates when we send your quote.
The process
Nothing needs to be moved out of the room beforehand. Everything we use comes in the van with us, lay protective sheets and get going once we have agreed what we’re doing. Most jobs take the best part of a day, and you can get on with other things while we’re there.
- First we look the bath over and confirm the finish.
- Everything around the bath is masked and covered.
- The bath is degreased, repaired and keyed.
- Primer and finish coats are applied.
- We remove the masking, tidy up and give you the curing time.
Preparing for the visit
- Ensure the area is dry
- Mention any earlier repairs or resurfacing
- Keep children and pets away from the room on the day
Get a quote
A quote takes minutes to ask for: take one close-up and one wider shot of the bath, include your postcode and send them over. You’ll get a fixed quote, not an estimate.
Advice
Little Wenlock and nearby
Little Wenlock is about 3 miles south-west of Telford, in Telford and Wrekin. Wherever you are in the TF6 postcode area, we carry out the work at your property. Little Wenlock is one of 79 places in Telford and Wrekin where we work. Our jobs stretch from Little Wenlock to Birmingham (about 30 miles away).
Postcode districts we cover here: TF6. That includes homes on Church Lane, The Alley and Crofters View. Other places close to Little Wenlock include Coalmoor (1 mile east), Buildwas (1 mile south), Leighton (2 miles south-west), Cluddley (2 miles north) and Garmston (3 miles west). Further out, we also cover Telford (3 miles north-east), Wellington (3 miles north), Oakengates (4 miles north-east), Newport (10 miles north-east), The Rock (3 miles north-east) and Newdale (3 miles north-east).
Local landmarks in Little Wenlock
In Little Wenlock, that means homes near Ercall Wood Academy and Church of St Lawrence and the streets around them. The nearest railway station is Wellington (Shropshire) station, about 3 miles north of the centre. Other landmarks nearby include Charlton Castle (4.1 miles north-west) and New Coracle Shed (2.1 miles south-east). The countryside around Little Wenlock includes The Ercall.
What bath re-enamelling costs
Prices start from £350. Each job gets its own fixed price. These are the things that affect it:
- Doing more than one item at once
- Any earlier repairs that need removing first
- How many areas need work
- What the surface is made of
A repair is priced on what needs doing, not where you live. You’ll see the full price before booking, with no extras added later.
Send photos for a quote
Two or three clear photos are usually enough. Try to include:
- What it’s made of, if you know
- Daylight if possible, and no flash reflection
- A wider photo showing the whole bath
- One sharp close-up of the damage
Send us a photo of the damage and one of the whole item, with your TF6 postcode, and we’ll come back with a fixed quote.
What a repair cannot fix
We will not take on work that won’t last, so here’s what a repair cannot put right:
- A poorly supported acrylic bath, until it’s firmed up
- Damage hidden under a previous coating, until it’s stripped back
- Leaks from fittings rather than the bath
Send us photos and we’ll tell you honestly.
What we work on
- Pressed steel baths
- Basins & shower trays
- Cast iron baths
- Acrylic baths
- Victorian roll-tops
Should I try a DIY kit first?
It’s natural to want to try a repair yourself. The risk is that a kit repair hides the damage for a while, then fails, and the old filler has to come out before a proper repair.
If you’re set on a kit, follow its instructions closely, and give it the full curing time. If it fails, we can still put it right.
About our accreditations · Every repair comes with a one-year guarantee.
