Wiltshire · England
Bath re-enamelling & resurfacing in Colerne, Wiltshire
Our repair technicians come to Colerne for full bath re-enamelling and resurfacing. Everything is done in place, with a one-year guarantee.
- Resurfacing from £350
- A dull, rough surface that won’t come clean
- A coating lifting around the plughole
Bath re-enamelling in Colerne without replacing anything
The bath stays where it is, so the taps, tiles and plumbing aren’t touched. Most baths are done in one visit, with the bath ready to use the following day. We regularly repair Victorian roll-tops, pressed steel baths and basins & shower trays, and people most often call us about staining under the taps and around the waste and a roll-top that’s seen better days.
All our work is covered by our one-year guarantee, wherever you are in Wiltshire.
- Location
- Colerne (SN14)
- County
- Wiltshire
- Guarantee
- One year on every repair
- Quotes
- From £350. Fixed and free, based on pictures
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
Honest limits
Honesty matters more than a booking, so here’s what a repair can’t fix:
- An acrylic bath that flexes badly underfoot
- Leaks from fittings rather than the bath
- Damage hidden under a previous coating, until it’s stripped back
If in doubt, send photos and we’ll say what we think before you book.
Surfaces we repair
- Cast iron baths
- Victorian roll-tops
- Basins & shower trays
- Pressed steel baths
- Acrylic baths
Do you need bath re-enamelling in Colerne?
Enamel does not fail overnight. Years of cleaning, hard water and hot baths dull the surface, starting where water runs and sits.
Keep an eye out for any of the following:
- Chips and rust in more than one place
- A coloured bath you want in white
- A dull, rough surface that will not come clean
- Brown or grey marks that don’t clean off
Comparing quotes
- Whether they match the colour on site
- What prep work is covered
- The length of the guarantee and what it covers
- Whether there are any call-out or travel charges
Different materials, different repairs
Roll-top and period baths
We can resurface a roll-top inside and out, and the outside can be refinished too.
Pressed steel
Under the enamel of a steel bath is thin metal. Exposed steel rusts quickly, so we treat and seal the metal before filling.
More services for Colerne
Why repair rather than replace?
If you like your bathroom but not your bath’s surface, re-enamelling is the least disruptive fix. Tiles, panels and taps stay put. Prices start from £350. A repair is priced on what needs doing, not where you live. You will see the full price before booking.
Why us?
- No need to remove anything
- We leave the room as we found it
- Straight answers about what a repair can do
- Typically one visit, start to finish
Take a look at our pricing and resurfacing vs replacement cost guide.
How the visit works
We turn up at the time we agreed with you, introduces themselves and looks over the damage before anything else. The floor and nearby surfaces are covered before we open a single tin. The work itself takes the best part of a day, and we leave the room as we found it.
- First we look the bath over and confirm the finish.
- Everything around the bath is masked and covered.
- The bath is degreased, repaired and keyed.
- We apply the primer and then the finish coats.
- We remove the masking, tidy up and give you the curing time.
How to prepare
- Let us know about parking or access
- Tell us if there are stairs or a lift
- Clear the area around the damage
How to get a price
For a price in Colerne, the easiest route is photos: one close up, one from further back, plus your postcode. You’ll get a fixed quote with dates to choose from.
Read more
Your questions about bath re-enamelling in Colerne
Will it make a mess?
Dust sheets and masking go down before we start, and tidy up before we leave.
What happens if you find more damage?
We will show you and explain before doing anything extra. Nothing extra is done without your say-so.
What happens once I’ve sent pictures?
We check the damage, the material and your postcode, then reply with a quote and the next dates we have.
Which areas do you work in?
Everywhere in the UK, Colerne included. Travel is included in the price.
Do you need to take the bath out?
No, it stays where it is. We work on the bath in place, with the room protected and ventilated.
Can you make a coloured bath white?
Yes, white is the usual choice. Tell us what you’d like when you ask for a quote.
Can I get a quote without a visit?
In nearly every case. If pictures don’t show enough, we’ll ask for another angle.
Can you re-enamel a roll-top bath?
Yes, roll-tops are a big part of our work. We resurface the inside, and the outside can be refinished too.
What affects the price in Colerne
Prices start from £350. We give every job a fixed quote from pictures. This is what makes a difference:
- How much damage there is
- Whether it’s a chip, crack, burn or wear
- Doing more than one item at once
- What the surface is made of
No two jobs are quite the same, so each one is priced on its own. What’s damaged, how badly and how easy it is to reach all make a difference, and doing several things on one visit costs less than separate visits.
Getting a price from photos
Photographing the damage takes a minute. Try to send:
- Something in shot to show the size
- Daylight if possible, and no flash reflection
- Where you are, by postcode
- Details of any past repairs
Send us photos of the damage and one of the entire item, with your SN14 postcode, and we’ll come back with a fixed quote.
Landlord and trade work in Colerne
Builders use us to fix snagging damage before handover, saving last-minute replacements. Several plots can be done in one visit to keep costs down.
We regularly price jobs from inventory or check-out photos. That means we can quote before you even visit the property, and we can arrange access with the tenant directly if that helps.
About Colerne
Colerne is about 6 miles north-east of Bath, in Wiltshire. We visit homes and businesses in Colerne and nearby villages, so nothing has to leave your home. We work in 425 places across Wiltshire. Our jobs stretch from Colerne to Birmingham (73 miles away).
Here we cover the SN14 postcode area. Jobs here include addresses on High Street, Market Place and Silver Street and the roads around them. Neighbouring places we cover include Thickwood (1 mile north), Box Hill (2 miles south-east), The Shoe (2 miles north-west), Ashley (2 miles south) and Box (2 miles south). Within a short drive, we also cover Trowbridge (9 miles south), Chippenham (6 miles east), Calne (11 miles east), Devizes (13 miles south-east), Westbury (13 miles south) and Melksham (7 miles south-east).
Local landmarks in Colerne
We visit homes around The Fox And Hounds Public House, Colerne C of E Primary School and Colerne Evangelical Church and the streets around them. Further afield, we also cover the area around Corsham (2.6 miles east) and Chippenham Community Hospital (6 miles east).
Should I try a DIY kit first?
We understand the appeal of fixing it yourself. The trouble is that kit repairs often look fine at first and then fail, and then the old filler has to be removed first.
What a professional repair adds is preparation, colour matching and finishing. We prepare the area properly, mix the colour on site and polish the finish to match, and the work is guaranteed.
About our accreditations · Every repair comes with a one-year guarantee.
