North Yorkshire · England

Bath Re-enamelling in Commondale

Bath re-enamelling in Commondale without the cost of replacing. Send us photos for a fixed quote, then we come to you.

  • Resurfacing from £350
  • Staining under the taps and around the waste
  • Several chips and rust patches
Surface Doctor technician refinishing the outside of a roll-top bath

Bath re-enamelling in Commondale

Bath re-enamelling in Commondale, done in place

The bath stays where it is, so the taps, tiles and plumbing are not touched. It typically takes one visit, with the bath ready to use the following day. Common call-outs are for several chips and rust patches and a dull, rough surface that won’t come clean, on cast iron baths, acrylic baths and basins & shower trays.

Peace of mind is built in: our one-year guarantee applies to every job, and we explain what it covers before you book.

Where
Commondale (YO21)
Area hub
North Yorkshire
Guarantee
A year, on every repair
Quotes
From £350. Fixed and free, based on pictures
Call
0345 017 0787
Last updated
23 October 2026
Technician in a mask working on a freestanding roll-top bath

Aftercare tips

Much of the damage we repair could have been avoided. These habits help:

  • Repair dripping taps early
  • Clean with a soft cloth and mild detergent
  • Respect the curing time we give you
  • Dry the bath after use to stop limescale

Rinse the bath and wipe it over after use, especially in hard water areas, so limescale cannot build up.

Rust spots on a worn bath get worse with time. Resurfacing before they spread keeps it simpler.

About Commondale

Commondale is about 4 miles south-east of Guisborough, in North Yorkshire. Book a date that suits you, and we will give you an arrival time in advance, so you’re not left waiting in all day. Commondale is one of 626 places in North Yorkshire we cover. We work right across the region, from Commondale to Newcastle upon Tyne (44 miles away).

Postcode districts we cover here: YO21. Other places close to Commondale include Castleton (2 miles south-east), Moorsholm (3 miles north-east), Ainthorpe (3 miles south-east), Charltons (3 miles north) and Danby (3 miles east). Further out, we also cover Whitby (15 miles east), Stokesley (9 miles west), Kirkbymoorside (15 miles south), Great Ayton (6 miles west) and Sleights (13 miles east).

Local landmarks in Commondale

Around Commondale, we work in homes near Saint Peter's Church and the streets around them. Commondale has its own railway station: Commondale station. Well-known places in the area include Castleton castle mound (2.3 miles south-east). The countryside around Commondale includes Freebrough Hill.

Map of Commondale © OpenStreetMap contributors

Work for landlords and builders

For developers and builders, we fix damage before handover, saving last-minute replacements. We can visit several plots in one trip to keep costs down.

We regularly work with letting and managing agents. Send the address, photos and access details and we’ll handle the rest.

Your questions about bath re-enamelling in Commondale

What happens next?

You get a fixed price and available dates. If we need another angle, we will ask.

Do you hold any accreditations?

Yes, including CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.

Can I get a quote without a visit?

In nearly every case. We only ask to see it in person if the photos cannot show what we need.

Will you leave a mess?

We protect the room with dust sheets and masking first, and tidy up before we leave.

Can you fix a peeling bath coating?

Yes, we do this regularly. Removing the old finish takes extra time, which we include in the price.

How long does re-enamelling take?

Normally a day, then it’s ready to use the following day. A badly pitted bath can need a second day.

Is there a smell?

Yes, while we’re applying the finish. We set up ventilation and the smell fades as it cures.

Do you work for landlords and businesses?

Yes. We carry out repairs for homeowners, landlords, letting agents, builders and businesses.

How the visit works

On the day itself, there is little for you to do. Let us in and show us the room, and we will take it from there. The job generally runs to a full day, including clearing up.

  1. We check the bath and agree the finish with you.
  2. Everything around the bath is masked and covered.
  3. We degrease the bath, fix any damage and key the surface.
  4. Primer and finish coats are applied.
  5. The masking comes off, we tidy up and tell you when it can be used.

How to prepare

  • Tell us if there are stairs or a lift
  • Make sure the room can be ventilated
  • Move bottles, mats and clutter away from the area

Ask for a price

Email us pictures of the damage and one of the entire item, and tell us you are in Commondale, and we’ll reply with a fixed price.

Get a free quote

Related advice

Common problems we fix in Commondale

Enamel does not fail overnight. Years of cleaning, hard water and hot baths wear the gloss away, typically first under the taps and around the waste.

The things customers usually mention when they call include:

  • A roll-top that is seen better days
  • A bath that stays dull however much you clean it
  • A coating lifting around the plughole
  • Thin, worn enamel in places

Comparing quotes

  • How soon you can use it again
  • Is the price fixed, and does it include VAT?
  • How to care for the finish
  • Whether they match the colour on site

10 questions to ask before you book

Honest limits

We will not take on work that won’t last, so here’s what a repair cannot put right:

  • An acrylic bath that flexes badly underfoot
  • Leaks from fittings rather than the bath
  • Problems we cannot see until an old finish comes off

Send us pictures and we will tell you honestly before booking.

Surfaces we repair

  • Victorian roll-tops
  • Cast iron baths
  • Acrylic baths
  • Basins & shower trays
  • Pressed steel baths

Different materials, different repairs

Pressed steel

Steel baths re-enamel well, as long as any rust is dealt with first. Steel frequently rusts by the plughole, so we check it carefully.

Acrylic

We resurface acrylic baths as well, using a system that bonds to acrylic. It must be solid and not flex underfoot.

What affects the price in Commondale

Prices start from £350. You’ll know the full cost before you book. We look at:

  • Where the damage is and how we get to it
  • How many areas need work
  • How many items we do on one visit
  • Unusual colours or finishes

It helps to know what pushes a price up or down: access, material, the extent of the damage and whether we can do several items together. Send pictures and you will get a fixed figure.

Quotes from your photos

Almost every job we do is priced from pictures. This is what to send:

  • Your postcode, so we can check dates
  • Whether it’s been repaired or coated before
  • Daylight if possible, and no flash reflection
  • A photo taken from further back

Most customers in Commondale get their price from pictures. Add a line about what happened and your postcode, and we’ll send back a fixed quote and some dates.

DIY repairs versus a professional job

You can buy a DIY kit for most repairs, and they can make a small mark look better. Where they fall down is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler frequently lifts.

If you’ve already tried a DIY fix, that is fine. We take the old repair out and do it properly, so it will not stop us repairing it. Just mention it when you send pictures, as it can add time.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.