Redcar and Cleveland · England
Bath Re-enamelling in Moorsholm
Full bath re-enamelling and resurfacing at your home in Moorsholm, with a one-year guarantee on every repair.
- Resurfacing from £350
- An original cast iron bath that needs restoring
- A bath that stays dull however much you clean it
How we handle bath re-enamelling in Moorsholm
Many of the baths we re-enamel are period roll-tops, which are heavy, hard to move and costly to replace. Doing them in place keeps an original feature. Whether it’s brown or grey marks that don’t clean off and wear marks under the taps, we can usually put it right.
All of our repairs are guaranteed for twelve months, and the guarantee is the same wherever you live. If something goes wrong with the work, we come back.
- Where
- Moorsholm (TS12)
- Area hub
- Redcar and Cleveland
- Guarantee
- 12 months on all our work
- Quotes
- From £350. Free and fixed, from your pictures
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
Repairing versus replacing in Moorsholm
When the bathroom is fine apart from the bath’s finish, re-enamelling is the least disruptive fix. Nothing else is disturbed. Our bath re-enamelling starts from £350. What it costs depends on how much damage there is and what kind, what it’s made of and how many jobs we combine into one visit. We give a fixed price from your pictures, so there are no surprises on the day.
Why choose Surface Doctor in Moorsholm
- We come to you, anywhere in the UK
- A fixed quote before booking
- Same prices wherever you are
- Honest advice, even when it means no job
Take a look at our prices page and bath cost comparison.
Landlord and trade work in Moorsholm
If you manage property in Moorsholm, we can repair and quote for several addresses together. Just send photos for each address and we will price them together.
We’re used to working with agents and managing companies. Send the address, photos and access details and we’ll arrange it.
Common questions in Moorsholm
Does someone need to be in?
Yes. The technician needs access to the room for the visit, at a time we agree with you.
Can you do more than one item on the same visit?
Of course, and it generally saves money. Just add the extra items to your photos and we’ll quote them together.
Will there be fumes?
A little, during the work. Ventilation keeps it down, and it fades as the finish cures.
Can I get a quote without a visit?
Typically, yes. A close-up and a wider photo are enough to give a fixed quote.
Are you accredited?
We are accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.
Is it worth repairing rather than replacing?
In most cases, yes. Replacement brings removal, refitting and making good, which a repair avoids. If it isn’t worth repairing, we’ll tell you.
When can you do it?
It depends on the time of year and where you are. Send photos with your postcode and we’ll reply with the earliest dates.
What areas do you cover?
All of Redcar and Cleveland, and the rest of the UK. Travel is included in the price.
What we can’t put right
It helps to know what we cannot do too:
- Holes rusted through the metal
- Leaking taps or wastes (a plumber’s job)
- Anything hidden under an old coating, until we remove it
If in doubt, send photos and we’ll say what we think.
What we work on
- Pressed steel baths
- Victorian roll-tops
- Acrylic baths
- Basins & shower trays
- Cast iron baths
How we price bath re-enamelling
Resurfacing from £350. Prices are worked out job by job, from your photos. What matters most is:
- What kind of damage it is
- Any earlier repairs that need removing first
- Where the damage is and how we get to it
- What the surface is made of
Our prices are the same across the UK, so there’s no premium for Moorsholm. The job itself decides the price: the material, the amount of damage and how many items.
Quotes from your pictures
You can take the photos on your phone. Just ensure we can see:
- A coin beside the damage so we can judge size
- One picture of the whole bath
- Where you are, by postcode
- Daylight if possible, and no flash reflection
Upload a photo of the damage and one of the whole item, with your TS12 postcode, and we will come back with a fixed quote.
Signs you need bath re-enamelling in Moorsholm
Previous coatings can fail too, peeling around the waste or bubbling. Failing coatings are stripped back before we resurface.
Typical reasons for a call-out include:
- Stains that won’t shift
- Thin, worn enamel in places
- An original cast iron bath that needs restoring
- An outdated colour you’d like to change
What your quote should include
- What preparation is included
- If travel is included in the price
- The length of the guarantee and what it covers
- How changes to the job are handled
Different materials, different repairs
Roll-top and period baths
We can resurface a roll-top inside and out, and the outside can be refinished too.
Pressed steel
Pressed steel baths take a new finish well, as long as any rust is dealt with first. Steel often rusts by the plughole, so we pay close attention there.
Our work in Moorsholm
Moorsholm is about 5 miles east of Guisborough, in Redcar and Cleveland. We visit clients in Moorsholm and the surrounding area, so nothing has to leave your home. We work in all 48 towns and villages in Redcar and Cleveland. Our nearest city page is Newcastle upon Tyne, about 43 miles away.
All of TS12 is covered. Local streets include High Street, Ashberry Close and Hillocks Lane, all of which we cover. Close by, we cover Stanghow (1 mile north-west), Lingdale (2 miles north-west), Liverton (2 miles north-east), Kilton Thorpe (2 miles north) and Margrove Park (2 miles north-west). We also work in nearby towns such as Redcar (8 miles north-west), Guisborough (5 miles west), Eston (9 miles west), Marske-by-the-Sea (6 miles north-west), Grangetown (9 miles north-west) and Skelton-in-Cleveland (4 miles north-west).
Around Moorsholm
We visit homes around Saint Mary's. The closest station to Moorsholm is Commondale station, about 3 miles south-west. Nearby you’ll also find Kilton Castle (2.3 miles north). For a walk, there’s Freebrough Hill.
Places near Moorsholm
More services for Moorsholm
Should I try a DIY kit first?
If you are set on a kit, follow its instructions closely, ensure the area is clean and completely dry, and don’t use it until it has fully cured. If it does not work out, we can still repair it properly.
DIY kits are sold for most surfaces, and they can make a small mark look better. Where they fall down is colour and preparation: they come in a handful of shades, and if the surface is not prepared the repair will not last.
How it works
You don’t need to empty the room. Everything we use comes in the van with us, put protection down and get going once we have agreed what we’re doing. Most jobs take most of the day, and you can get on with other things while we are there.
- The bathroom is protected and ventilation set up.
- We remove the old silicone and deep clean the bath.
- Chips, rust and pitting are repaired.
- The surface is keyed and primed for the new finish.
- Several coats of finish are sprayed on, then it cures.
Before we arrive
- Keep a parking space free if you can
- Mention if the room is upstairs or in a flat
- Let us know if it has been repaired before
Ask for a price
We price from photos so you do not have to wait in for a survey. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through.
Related advice
About our accreditations · Every repair comes with a one-year guarantee.
