Perth and Kinross · Scotland
Bath Re-enamelling for Muthill homes
Bath re-enamelling in Muthill without the cost of replacing. Get a fixed price from your photos, then we come to you.
- Resurfacing from £350
- A peeling or bubbling previous coating
- Enamel that is lost its shine and feels rough
How we price bath re-enamelling
Resurfacing from £350. There are no hourly rates or hidden extras. The price depends on:
- The type of damage
- Previous DIY repairs that have to come out
- The colour and finish to match
- The size and number of damaged areas
Our prices are the same across the UK, with no extra for Muthill. The job itself decides the price: the material, the amount of damage and how many items.
Quotes from your pictures
You can normally get a fixed price without us visiting. To make it quick:
- Good light, ideally daylight, without flash glare
- A coin or ruler next to the damage for scale
- One picture of the entire bath
- Your postcode, so we can check dates
No survey visit is needed: we price from pictures. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through, and we’ll come back with a fixed figure.
How we handle bath re-enamelling in Muthill
If your bath is sound but looks tired, re-enamelling is normally the most cost-effective option. There’s no removal, plumbing or tiling involved. If you are dealing with staining under the taps and around the waste and worn patches where water runs and sits, we can help.
Your repair is guaranteed for a year, as with every job we do.
- Where
- Muthill (PH5)
- County
- Perth and Kinross
- Warranty
- A year, on every repair
- Quote
- From £350. Free and fixed, from your pictures
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
Also near Muthill
More services for Muthill
Different materials, different repairs
Pressed steel
Pressed steel baths take a new finish well, once any rust has been treated. Rust around the waste is common on steel, so we check it carefully.
Roll-top and period baths
Freestanding roll-tops can be done inside and out, with the outside refinished as well.
Aftercare tips
Much of the damage we repair could have been avoided. A few tips:
- Keep toiletries on a shelf rather than in the bath
- Avoid suction-cup mats
- Fix dripping taps quickly
- Get any chip repaired quickly
Treat the new finish gently at first: let it cure fully, then use mild cleaners only. After that, no abrasives and no suction mats.
Worn enamel only gets rougher with time, and any rust spreads underneath. Acting earlier keeps the preparation simpler.
Common problems we fix in Muthill
Sometimes it’s an earlier resurfacing that has failed, peeling around the waste or bubbling. Failing coatings are stripped back before we resurface.
Common reasons people in Muthill contact us are:
- Enamel that is lost its shine and feels rough
- An original cast iron bath that needs restoring
- A peeling or bubbling previous coating
- Staining under the taps and around the waste
Comparing quotes
- Whether the colour is mixed to match
- Who turns up on the day
- How the room is protected while they work
- Whether the price covers travel
Muthill: your questions answered
Can you redo someone else’s repair?
Yes, we frequently do. Removing the old work can add time, and that is in the quote.
Can pets and children be at home?
Just keep them out of the work area. We will tell you when the room can be used again.
Do you cover the entire of Perth and Kinross?
Everywhere in the UK, Muthill included. There is no extra charge for travel.
Can tenants book a repair?
Yes, but check with your landlord or agent first. Many landlords are happy for a repair to be arranged.
Can you quote from pictures?
Yes, almost always. A close-up and a wider photo are enough to give a fixed price.
Do you cover Muthill?
We do. We send a technician to Muthill for every job, and the price is the same as everywhere else.
Will the new finish last?
A well-prepared finish lasts a long time if it’s looked after. Gentle cleaning, no suction mats.
Do I need to be at home?
Yes. The technician needs access to the room for the visit, at a time that suits you.
What we do, step by step
We begin by going over the job with you. Then the area is sheeted and masked and the work begins. You can expect it to take the best part of a day, and we will keep you posted as we go.
- First we look the bath over and confirm the finish.
- Taps, tiles and the floor are masked off.
- We degrease the bath, fix any damage and key the surface.
- We apply the primer and then the finish coats.
- We remove the masking, tidy up and give you the curing time.
Getting ready for the visit
- Clear toiletries, mats and anything else from around the area
- Keep a parking space free if you can
- Let us know about parking or access
Getting a price
Getting a price is easy: take a close-up of the damage and a picture from further back, send them to us with your postcode, and we will reply with a fixed price. There is no charge for the quote and no obligation.
Advice
Our work in Muthill
Muthill is about 15 miles north of Alloa, in Perth and Kinross. Whether you’re in the middle of Muthill or on the outskirts, we offer exactly the same service: a fixed price, a tidy visit and a guarantee. We cover all 107 towns and villages across Perth and Kinross, from the larger towns to small villages. You can also see our page for Edinburgh, about 36 miles away.
Here we cover the PH5 postcode area. Local streets include Station Road, Glebe Road and Willoughby Street. If you’re just outside Muthill, we cover Crieff (3 miles north), Tullibardine (4 miles south-east), Gilmerton (4 miles north), Braco (5 miles south-west) and Blackford (5 miles south). We also work in nearby towns such as Perth (15 miles east), Auchterarder (5 miles south-east), Letham (14 miles east), Tulloch (15 miles east), Oakbank (15 miles east) and Hillyland (14 miles east).
Around Muthill
Locally, our jobs take us to homes close to St James Episcopal Church and the streets around them. Further afield, we also cover the area around Culdees Castle (1.1 miles south-east) and Muthill Village Museum (under half a mile north). For a walk, there’s Pond of Drummond.
Can I fix it myself?
It’s natural to want to try a repair yourself. The trouble is that kit repairs often look fine at first and then fail, and the old filler has to come out before a proper repair.
If you are set on a kit, follow its instructions closely and work on a clean, dry surface, and give it the full curing time. If it fails, we can still put it right.
When a repair is not the answer
A repair is not right for every job, for example:
- An acrylic bath that flexes badly underfoot
- Steel that has corroded right through
- Anything hidden under an old coating, until we remove it
If in doubt, send photos and we’ll say what we think before booking.
What we work on
- Cast iron baths
- Victorian roll-tops
- Pressed steel baths
- Acrylic baths
- Basins & shower trays
Work for landlords and builders
We carry out planned and one-off repairs for housing associations and facilities teams in Perth and Kinross and across the UK. A repair avoids taking out and refitting, which is easier on the people living there.
If you manage property in Muthill, we can repair and quote for several addresses together. Just send pictures for each address and we’ll price them together.
About our accreditations · Every repair comes with a one-year guarantee.
