Shropshire · England
Bath re-enamelling & resurfacing in Condover, Shropshire
Bath re-enamelling in Condover without the cost of replacing. Send us photos for a fixed quote, then we come to you.
- Resurfacing from £350
- A bath in a colour that no longer suits
- A coating lifting around the plughole
Bath re-enamelling at your home in Condover
The bath stays where it is, so your taps, tiles and plumbing are left alone. Most baths are done in one visit, and can be used again the next day. We work on cast iron baths, pressed steel baths and acrylic baths, and the jobs we see most are an outdated colour you’d like to change and chips and rust in more than one place.
You get a one-year guarantee, the same in Condover as everywhere else we work.
- Location
- Condover (SY5)
- Region
- Shropshire
- Cover
- A year, on every repair
- Quotes
- From £350. Fixed and free, based on photos
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
Common problems we fix in Condover
In hard water areas, limescale and the cleaning it needs wear enamel faster, and abrasive cleaners do the most damage.
These are the problems we’re asked about most:
- A period or roll-top bath worth keeping
- A bath in a colour that no longer suits
- An old resurfacing that’s failing
- Chips and rust in more than one place
Questions to ask before you book
- The length of the guarantee and what it covers
- Is the price fixed, and does it include VAT?
- Whether a trained technician does the job
- What protection goes down before work starts
Should you replace it?
Replacing the bath means a plumber, removing a heavy bath, re-tiling or making good the walls and days without a bathroom. Resurfacing gives the bath a new finish with the bath left where it is. Prices start from £350. A few things move the price: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Photos let us give you a fixed figure.
Why us?
- A year’s guarantee on all work
- Fixed prices from your photos
- Everything repaired in place
- Work done at your home or business
Take a look at our prices page or bath cost comparison.
How it works
Visits start with a quick look at the job together, so you know exactly what we are doing. After that, protection goes down around the work area and we start. Allow the best part of a day.
- First we look the bath over and confirm the finish.
- Taps, tiles and the floor are masked off.
- We degrease the bath, fix any damage and key the surface.
- We apply the primer and then the finish coats.
- We remove the masking, tidy up and give you the curing time.
How to prepare
- Let us know about parking or access
- Open a window if you can
- Have somewhere for us to park nearby if possible
Get a quote
There is no need for us to visit first. Nearly every job can be priced from pictures: send a close-up, a wider shot and your postcode, and we will reply with a fixed price.
Read more
Condover questions
How quickly can you book me in?
Your quote comes with available dates. If it’s urgent, say so and we will do what we can.
Do you charge for travel?
Travel is included in the price, and we charge the same wherever you are.
Can you fix a peeling bath coating?
Usually, yes. The old coating comes off before we resurface it. Tell us about it when you ask for a quote.
Will there be a smell?
A little, depending on the job. Ventilation keeps it to a minimum.
Can you make a coloured bath white?
Yes, most people go for white. Tell us what you’d like when you ask for a quote.
How long does re-enamelling last?
Care for it and it lasts. Avoid abrasive cleaners and suction mats.
How long does re-enamelling take?
Most baths are done in a day, ready the next day. We give you timings with the quote.
Will there be fumes?
There is some smell while the coating is applied, so we ventilate the room. It fades as the coating cures.
When we’d advise against a repair
We’d rather lose a job than do one that will not last, so these are the limits:
- A bath that’s rusted through
- An acrylic bath that flexes badly underfoot
- Problems we cannot see until an old finish comes off
Send us photos and we’ll tell you honestly.
Surfaces we repair
- Cast iron baths
- Pressed steel baths
- Basins & shower trays
- Victorian roll-tops
- Acrylic baths
Work for landlords and builders
Rented homes see more wear and tear, and replacing items every time a tenant leaves is expensive. A repair between tenancies is a cheaper way to keep the property in good order.
Builders use us to fix snagging damage before handover. We can visit several plots in one trip.
Nearby places to Condover
More services for Condover
Different materials, different repairs
Roll-top and period baths
We can resurface a roll-top inside and out, and the outside can be refinished too.
Acrylic
We resurface acrylic baths as well, with a coating system suited to acrylic. The bath needs to be firm and well supported for the finish to last.
Our work in Condover
Condover is about 4 miles south of Shrewsbury, in Shropshire. Anywhere in SY5, a technician comes to you. Condover is one of 433 towns and villages in Shropshire where we work. We work right across the region, from Condover to Birmingham (about 38 miles away).
Here we cover the SY5 postcode area. That includes homes on Station Road, Church Road and Harley Road. Nearby, we also work in Great Ryton (2 miles south), Bayston Hill (2 miles north-west), Lythbank (2 miles west), Dorrington (2 miles south-west) and Pulley (2 miles north). Larger places within reach include Shrewsbury (4 miles north), Madeley (13 miles east), Coleham (4 miles north), Kingsland (4 miles north), Belle Vue (4 miles north) and Monkmoor (5 miles north).
Local landmarks in Condover
We visit homes around Condover CofE Primary School and Church of St Mary and St Andrew and the streets around them. The nearest railway station is Shrewsbury station, roughly 4.3 miles north. Further afield, we also cover the area around Stapleton Motte (1.6 miles south-west) and Clive House Museum (4 miles north). Open spaces near Condover include Bomere Pool.
- Other local spots include Shrewsbury and Atcham (1.5 miles south)
What affects the price in Condover
Prices start from £350. You will not pay by the hour. The price depends on:
- The material
- Whether it’s a chip, crack, burn or wear
- How many items we do on one visit
- Unusual colours or finishes
Most people are surprised how affordable a repair is, particularly next to the cost of replacement. Photos let us give you the exact figure.
Getting a price from photos
Before you send pictures, these tips help us give you a firm price:
- Daylight if possible, and no flash reflection
- One sharp close-up of the damage
- Any details about the material
- Something in shot to show the size
The quickest way to a price is to send a couple of pictures through our quote form or ring us. We will say right away if a repair is the right fix.
How to care for the repair
Much of the damage we repair could have been avoided. A few tips:
- Do not let dyes or oils sit on the finish
- Stick to gentle, non-abrasive cleaners
- Store bottles off the bath
- Do not use the bath until it has fully cured
Use mild, non-abrasive cleaners, don’t use suction bath mats, and do not leave bottles or razors standing on the surface.
Avoid scrubbing a dull bath with abrasive cleaners. It removes more of the surface.
About our accreditations · Every repair comes with a one-year guarantee.
