Greater London · England
Bath re-enamelling & resurfacing in Coombe, Greater London
Bath re-enamelling in and around Coombe: a fixed quote from photos, a tidy visit and a one-year guarantee.
- Resurfacing from £350
- Several chips and rust patches
- A period or roll-top bath worth keeping
How to look after the repair
How the surface is treated afterwards matters:
- Get any chip repaired quickly
- Do not let dyes or oils sit on the finish
- Respect the curing time we give you
- Use washing-up liquid and a soft cloth
Stick to mild, non-abrasive cleaners, don’t use suction bath mats, and keep bottles and razors off the surface.
On a worn bath, rust spots keep spreading and make the job bigger. Resurfacing before they spread keeps it simpler.
How we handle bath re-enamelling in Coombe
Re-enamelling works especially well on cast iron and steel, and we can resurface acrylic baths as well. The result is a smooth, even, glossy finish. Whether it’s an old resurfacing that’s failing and chips and rust in more than one place, we can help, on Victorian roll-tops, acrylic baths and pressed steel baths alike.
All our work is covered by a one-year guarantee.
- Where
- Coombe (KT2, KT3, SW20)
- Region
- Greater London
- Warranty
- 12 months on all our work
- Quote
- From £350. Free, fixed price from pictures
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
DIY repairs versus a professional job
If you’ve already tried a DIY fix, that’s fine. We remove the old filler and start again, so it does not stop a professional repair. It does add a little time, so tell us about it when you send photos.
It’s natural to want to try a repair yourself. The trouble is that kit repairs frequently look fine at first and then fail, and then the old filler has to be removed first.
What we cannot put right
In fairness, some problems need a different fix:
- An acrylic bath that flexes badly underfoot
- Problems we cannot see until an old finish comes off
- A bath split right through the body
If in doubt, send photos and we’ll say what we think.
Materials we repair
- Pressed steel baths
- Victorian roll-tops
- Acrylic baths
- Cast iron baths
- Basins & shower trays
What we are called out for in Coombe
Enamel does not fail overnight. Abrasive cleaners, limescale and years of use wear the gloss away, generally first under the taps and around the waste.
The most common problems we’re called about are:
- Thin, worn enamel in places
- A roll-top that is seen better days
- Brown or grey marks that do not clean off
- Enamel that’s lost its shine and feels rough
What your quote should include
- Aftercare advice
- Whether there are any call-out or travel charges
- Whether cleaning and preparation are in the price
- Whether they match the colour on site
Materials and what they mean for the repair
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Exposed steel rusts quickly, so the metal is treated and sealed before the repair.
Cast iron
A cast iron bath is heavy enough that most people never want to move it. Only the enamel surface wears or chips, and that’s the part we put right.
Where we work around Coombe
Coombe is about 1 mile north of New Malden, in Greater London. Anywhere in KT2, we come to you. Coombe is one of 764 places in Greater London we cover. Our nearest city page is London, about 9 miles away.
Here we cover the KT2, KT3 and SW20 postcode area. From West Road, Crown Road and Traps Lane or anywhere nearby, a technician can come to you. Close by, we cover Motspur Park (1 mile south-east), Coombe Hill (1 mile north), Kingston Vale (1 mile north-east), Norbiton (1 mile south-west) and New Malden (1 mile south). We also work in nearby towns such as London (9 miles north-east), City of Westminster (8 miles north-east), Marylebone (8 miles north-east), Kensington (6 miles north-east), St Pancras (10 miles north-east) and Shoreditch (11 miles north-east).
Local landmarks in Coombe
In Coombe, that means homes near Coombe Girls' School, Coombe Hill Junior School and Canbury School. You’ll also find Cottenham Park (1.2 miles east), Christ Church New Malden (0.9 miles south) and The Royal Oak Public House (0.8 miles south). The closest station to Coombe is Norbiton station, about 1 mile south-west of the centre. Other landmarks nearby include Municipal Borough of Malden and Coombe (1.3 miles south) and Kingston Hospital (0.8 miles west). For a walk, there is Kew Gardens Lake and Kingston Hill Road area.
Common questions in Coombe
How do I get a price for bath re-enamelling in Coombe?
Prices start from £350. Because every job differs, we price from photos. You know the full cost before anything is booked.
Do you come to Coombe?
Yes. We cover the whole UK and travel to Coombe and the rest of Greater London. Send pictures and we will quote, or call 0345 017 0787.
What information do you need?
Send photos through the quote form or call 0345 017 0787, and we will take it from there.
How long does re-enamelling last?
A well-prepared finish lasts a long time if it’s looked after. Avoid abrasive cleaners and suction mats.
Is it safe with children and pets around?
We ask you to keep children and pets out of the room while we work and until it has cured. Everywhere else in the home is fine.
Do the materials smell?
Expect a mild smell while we are working, which fades afterwards.
Do I have to be there?
Yes. The technician needs access to the room for the visit, at a time that suits you.
Do you work for landlords and businesses?
Yes. We carry out repairs for homeowners, landlords, letting agents, builders and businesses in Coombe.
The process
On the day itself, there’s little for you to do. Let us in and show us the room, and we’ll take it from there. The job generally runs to most of the day.
- First we look the bath over and confirm the finish.
- Taps, tiles and the floor are masked off.
- The bath is degreased, repaired and keyed.
- Primer and finish coats are applied.
- The masking comes off, we tidy up and tell you when it can be used.
Preparing for the visit
- Open a window if you can
- Tell us if there are stairs or a lift
- Clear the area around the damage
Ask for a price
Send us pictures of the damage and one of the whole item, with your KT2 postcode, and we’ll come back with a fixed quote.
Related advice
Should you replace it?
A new bath means a plumber, removing a heavy bath, making good the walls and tiles and days without a bathroom. Resurfacing renews the whole surface with the bath left where it is. Prices start from £350. Our prices are the same across the UK, with no extra for Coombe. The job itself decides the price: how much damage, what it’s made of and how many items.
What you get with us
- Repair technicians who travel to you, UK-wide
- A year’s guarantee on all work
- Everything repaired in place
- We will tell you if it’s not worth repairing
Take a look at our full price list and guide to resurfacing and replacement costs.
Landlord and trade work in Coombe
Hospitality businesses cannot afford rooms out of action for long, so we keep visits short and tidy. We’ll fit around changeovers where we can.
We are used to working with agents and managing companies. Just send photos, the address and how to get access and we’ll arrange it.
Places near Coombe
Also in Coombe
About our accreditations · Every repair comes with a one-year guarantee.
