Greater London · England
Bath re-enamelling & resurfacing in Coombe Hill, Greater London
Bath re-enamelling across Coombe Hill and nearby, typically in one visit and guaranteed for a year.
- Resurfacing from £350
- A roll-top that’s seen better days
- Worn patches where water runs and sits
Bath re-enamelling in Coombe Hill without replacing anything
Re-enamelling gives a worn bath a new glossy surface without a refit. It’s the answer when the entire bath is tired rather than one spot. Typical jobs include a coloured bath you want in white and enamel that’s lost its shine and feels rough, across acrylic baths, basins & shower trays and Victorian roll-tops.
All our work is covered by our one-year guarantee, wherever you are in Greater London.
- Where
- Coombe Hill (SW15, KT2)
- Area hub
- Greater London
- Guarantee
- 12 months on all our work
- Quotes
- From £350. Fixed and free, based on photos
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
Can I fix it myself?
If you do try a kit, read the instructions carefully, make sure the area is clean and completely dry, and give it the full curing time. If it fails, we can still put it right.
We understand the appeal of fixing it yourself. The risk is that a kit repair hides the damage for a while, then fails, and the old filler has to come out before a proper repair.
What affects the price in Coombe Hill
Resurfacing from £350. We charge the same across the UK, including Coombe Hill. What changes the price is:
- Whether old repairs or coatings need taking off
- How easy the damage is to reach
- The material and finish
- Whether we combine several jobs
It helps to know what pushes a price up or down: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Send photos and you’ll get a fixed figure.
Quotes from your pictures
Before you send pictures, these tips help us give you a firm price:
- Details of any past repairs
- Your postcode, so we can check dates
- A close-up of the damage, in focus
- Something in shot to show the size
For most jobs, pictures are all we need to give you a price. Tell us what happened and where you are, and we will send back a fixed quote and some dates.
Repair or replace in Coombe Hill?
Replacing a cast iron bath is a big job: they’re heavy, frequently need breaking up, and a new one is not cheap. Re-enamelling avoids all of it. Our bath re-enamelling starts from £350. Our prices are the same across the UK, with no extra for Coombe Hill. What changes the price is the job itself: how much damage, what it’s made of and how many items.
Why book with us
- Technicians who travel to you, UK-wide
- Honest advice, even when it means no job
- Rooms protected and left tidy
- Colour mixed on the day to match
Read our full price list and bath cost comparison.
Different materials, different repairs
Acrylic
We resurface acrylic baths as well, using a system that bonds to acrylic. It must be solid and not flex underfoot for the finish to last.
Roll-top and period baths
We can resurface a roll-top inside and out, and the outside can be refinished too.
What happens on the day
There’s not much you need to do on the day. Let us in and show us the room, and we will take it from there. Most visits take the best part of a day.
- First we look the bath over and confirm the finish.
- Taps, tiles and the floor are masked off.
- The bath is degreased, repaired and keyed.
- Primer and finish coats are applied.
- The masking comes off, we tidy up and tell you when it can be used.
Getting ready for the visit
- Ensure the room can be ventilated
- Move bottles, mats and clutter away from the area
- Tell us if there are stairs or a lift
How to get a price
To get a price, send a couple of pictures using our quote form or ring us. We’ll say straight away if a repair is the right fix.
Read more
Also near Coombe Hill
More services for Coombe Hill
When a repair is not the answer
It helps to know what we cannot do too:
- Holes rusted through the metal
- Damage hidden under a previous coating, until it’s stripped back
- Acrylic that moves when you stand in it
If in doubt, send pictures and we will say what we think.
Materials we repair
- Basins & shower trays
- Acrylic baths
- Cast iron baths
- Pressed steel baths
- Victorian roll-tops
What we are called out for in Coombe Hill
Hard water speeds up the wear, and abrasive cleaners do the most damage.
Common reasons people in Coombe Hill contact us include:
- An outdated colour you’d like to change
- Worn patches where water runs and sits
- A bath that stays dull however much you clean it
- Lots of chips and rust spots
Comparing quotes
- Whether a trained technician does the job
- Whether they match the colour on site
- What happens if they find more damage
- How your room will be protected
Where we work around Coombe Hill
Coombe Hill is about 2 miles north-east of Kingston upon Thames, in Greater London. We work in every kind of home, old or new, large or small, as well as offices, shops and holiday lets. Our technicians cover all 764 towns and villages in Greater London. We work right across the region, from Coombe Hill to London (about 9 miles away).
All of SW15 and KT2 is within our area, from the main roads to the quietest streets. From Keswick Avenue, Derwent Avenue and Robin Hood Lane or anywhere nearby, a technician can come to you. With the A308 close by, Coombe Hill is easy for our repair technicians to reach. Other places close to Coombe Hill include Kingston Vale (1 mile east), Putney Vale (1 mile east), Coombe (1 mile south), Norbiton (2 miles south-west) and Motspur Park (2 miles south-east). Within a short drive, we also cover London (9 miles north-east), City of Westminster (7 miles north-east), Marylebone (8 miles north-east), Kensington (5 miles north-east), St Pancras (9 miles north-east) and Shoreditch (10 miles north-east).
Around Coombe Hill
In Coombe Hill, that means homes near Robin Hood Primary School, Richmond Park and Coombe Girls' School. Also close by are Duke of Cambridge pub (within half a mile north-east), Canbury School (0.7 miles south-west) and St John the Baptist (less than half a mile north-east). For rail, the closest station is Norbiton station, about 1.6 miles south-west. Well-known places in the area include Coombe (0.7 miles south) and Bentall Centre (2.2 miles south-west). Green spaces nearby include Kingston Hill Road area and Fishpond Wood and Beverley Meads.
Landlord and trade work in Coombe Hill
We carry out planned and one-off repairs for housing associations and facilities teams. Repairing in place avoids the disruption of a replacement, which matters when someone is living in the home.
Rental properties take more wear, and replacing things at every changeover adds up. A repair between tenancies is a cheaper way to keep the property in good order.
Your questions about bath re-enamelling in Coombe Hill
Can you make a coloured bath white?
Yes. We can resurface a coloured bath in white, and the basin and toilet can be done too.
Can a failed resurfacing be redone?
In most cases. The old coating comes off before we resurface it. Tell us about it when you ask for a quote.
How do I get a price for bath re-enamelling in Coombe Hill?
Resurfacing from £350. We give a fixed price based on photos of the damage. Send a close-up of the damage and a wider photo and your postcode.
Is it messy?
We protect the room with dust sheets and masking first, and tidy up before we leave.
Can pets and children be at home?
We ask you to keep children and pets out of the room while we work. The rest of the house is unaffected.
Will there be a smell?
Some materials have a smell while they’re applied. It clears as the materials cure.
How long is the bath unusable?
Most baths are done in a day and can be used the day after. We’ll confirm timings when we quote.
Are you accredited?
Yes. Our accreditations include CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.
About our accreditations · Every repair comes with a one-year guarantee.
