Shropshire · England
Bath Re-enamelling for Coundarbour homes
We travel to Coundarbour for full bath re-enamelling and resurfacing. Nothing is taken out, and the work is guaranteed.
- Resurfacing from £350
- Thin, worn enamel in places
- An outdated colour you’d like to change
Bath re-enamelling in Coundarbour, done in place
The bath stays where it is, so your taps, tiles and plumbing are left alone. Most baths are done in one visit, and can be used again the next day. Typical jobs include a bath that stays dull however much you clean it and worn patches where water runs and sits, across cast iron baths, acrylic baths and basins & shower trays.
A one-year guarantee comes with the work, just as it does everywhere we cover.
- Location
- Coundarbour (SY5)
- County
- Shropshire
- Guarantee
- One year on every repair
- Quote
- From £350. Free, fixed price from pictures
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
Coundarbour and nearby
Coundarbour is about 6 miles south-east of Shrewsbury, in Shropshire. Our repair technicians come to customers in Coundarbour, so nothing has to leave your home. Coundarbour is one of 433 places in Shropshire where we work. You can also see our page for Birmingham, about 34 miles away.
We cover every part of the SY5 postcode area and the streets around it. If you are just outside Coundarbour, we cover Cross Houses (2 miles north-west), Cressage (2 miles south-east), Eaton Constantine (3 miles east), Atcham (3 miles north-west) and Acton Burnell (3 miles south-west). Further out, we also cover Shrewsbury (6 miles north-west), Madeley (8 miles east), Bridgnorth (12 miles south-east), Coleham (6 miles north-west), Kingsland (6 miles north-west) and Belle Vue (6 miles north-west).
Local landmarks in Coundarbour
Around Coundarbour, we work in homes near St Peter's Church. Further afield, we also cover the area around Wroxeter Roman Site And Museum (2 miles north) and Acton Burnell Castle (2.7 miles south-west). Not far away are Bomere Pool.
Nearby places to Coundarbour
Other services in Coundarbour
Repairs by material
Acrylic
Acrylic baths can be resurfaced too, using a system that bonds to acrylic. It must be solid and not flex underfoot.
Pressed steel
Under the enamel of a steel bath is thin metal. Once a chip exposes it, rust follows quickly, so the metal is treated and sealed before the repair.
Coundarbour questions
Can you change the colour of my bath?
Yes, most people go for white. Tell us what you’d like when you ask for a quote.
When can you do it?
Your quote comes with available dates. If it’s urgent, say so and we’ll do what we can.
How do I book?
Photos of the damage, a photo of the whole bath and your postcode. After that, we just agree a date.
Do you hold any accreditations?
Yes. Our accreditations include CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.
What happens if you find more damage?
We’ll show you and explain before doing anything extra. Nothing extra is done without your say-so.
Do you come to Coundarbour?
We do. Technicians travel to Coundarbour from across the region, and the price is the same as everywhere else.
Is repairing better than replacing?
Generally, when the rest is in good condition. A repair avoids removal and making good. We’ll tell you honestly if replacement makes more sense.
Can I get a quote without a visit?
Nearly always. If photos don’t show enough, we will ask for another angle.
Landlord and trade work in Coundarbour
Builders use us to fix snagging damage before handover, so there’s no need to replace a damaged item at the last minute. We can visit several plots in one trip to keep costs down.
Landlords, letting agents and housing providers in Coundarbour use us as well as homeowners. Repairing between tenancies keeps void periods short, and it generally costs far less than a refit.
Can I fix it myself?
The difference between a kit and a professional repair is mostly in the preparation and colour. We prepare the area properly, mix the colour on site and polish the finish to match, then guarantee it for a year.
If you do try a kit, read the instructions carefully, make sure the area is clean and completely dry, and don’t use it until it has fully cured. If it does not work out, we can still repair it properly.
What bath re-enamelling costs
Prices start from £350. Every quote is fixed and free. What we look at:
- Access to the area
- Whether old repairs or coatings need taking off
- How much damage there is
- The type of damage
Most people are surprised how affordable a repair is, especially compared with replacing and refitting. Photos let us give you the exact figure.
Quotes from your photos
You can take the photos on your phone, there is no need for anything special. Just make sure we can see:
- A wider photo showing the entire bath
- Good light, ideally daylight, without flash glare
- Details of any past repairs
- Any details about the material
If you are in Coundarbour and want a price, the easiest route is pictures: one close up, one from further back, plus your postcode. We reply with a fixed quote and our next available dates.
How to look after the repair
Aftercare is simple, and it makes a real difference:
- Do not use the bath until it has fully cured
- Clean with a soft cloth and mild detergent
- Fix dripping taps quickly
- Do not leave bottles, razors or sponges standing on the surface
The first few days matter most: let it cure fully, then use mild cleaners only. From then on, avoid abrasives and suction mats.
If a previous coating is starting to peel, do not pick at it. Water gets under it and the damage spreads, so it’s better to have it stripped and redone.
What we do, step by step
On the day itself, there is little for you to do. Let us in and show us the room, and we’ll take it from there. Most visits take most of the day.
- We check the bath and agree the finish with you.
- Everything around the bath is masked and covered.
- The bath is degreased, repaired and keyed.
- We apply the primer and then the finish coats.
- We remove the masking, tidy up and give you the curing time.
How to prepare
- Open a window if you can
- Tell us if there are stairs or a lift
- Tell us about parking, stairs or access
How to get a price
To get a price, send two or three pictures using our quote form or ring us. We’ll say straight away if a repair is the right fix.
Read more
Repair or replace: which is better?
When the bathroom is fine apart from the bath’s finish, resurfacing is the simplest answer. Tiles, panels and taps stay put. Resurfacing from £350, with every job priced individually. It helps to know what pushes a price up or down: access, material, the extent of the damage and whether we can do several items together. Photos let us give you a fixed figure.
What you get with us
- Work done at your home or business
- Fixed prices from your photos
- Colour-matched on site
- Same prices wherever you are
Take a look at our pricing or guide to resurfacing and replacement costs.
Honest limits
It helps to know what we cannot do too:
- An acrylic bath that flexes badly underfoot
- Leaking taps or wastes (a plumber’s job)
- Damage hidden under a previous coating, until it’s stripped back
If in doubt, send photos and we’ll say what we think before you book.
Materials we work on in Coundarbour
- Basins & shower trays
- Victorian roll-tops
- Acrylic baths
- Cast iron baths
- Pressed steel baths
About our accreditations · Every repair comes with a one-year guarantee.
