Shropshire · England
Bath re-enamelling & resurfacing in Eaton Constantine, Shropshire
Bath re-enamelling for Eaton Constantine, without a refit. Send us pictures for a fixed price, then we come to you.
- Resurfacing from £350
- Thin, worn enamel in places
- Enamel that’s lost its shine and feels rough
Looking after it afterwards
So the finish stays in good condition:
- A quick wipe after use keeps limescale away
- Rinse off hair dye, oils and bath bombs right away
- Store bottles off the bath
- Leave the bath for the full curing time before using it
Avoid hair dye, bath bombs and oils sitting on the surface, as they can stain. Repair dripping taps promptly.
Rust spots on a worn bath get worse with time and make the job bigger. Resurfacing before they spread keeps it simpler.
Bath re-enamelling at your home in Eaton Constantine
If your bath is sound but looks tired, resurfacing is normally the best value. It avoids removal, plumbing and re-tiling. We work on pressed steel baths, cast iron baths and Victorian roll-tops, and people most frequently call us about worn patches where water runs and sits and a dull, rough surface that won’t come clean.
We guarantee the work for a year. If something is not right in that time, we come back and put it right.
- Area
- Eaton Constantine (SY5)
- County
- Shropshire
- Warranty
- A year, on every repair
- Quotes
- From £350. Fixed and free, based on photos
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
Repair or replace in Eaton Constantine?
When the bathroom is fine apart from the bath’s finish, resurfacing is the simplest answer. Tiles, panels and taps stay put. Resurfacing from £350, with every job priced individually. No two jobs are quite the same, so we price each one individually. The size and type of damage, the material and access all make a difference, and combining jobs on one visit brings the cost down.
Why choose Surface Doctor in Eaton Constantine
- Nothing taken out or refitted
- Dust sheets down, tidy finish
- Colours mixed by hand to suit your surface
- CHAS, Constructionline and SafeContractor accredited
See our prices page and guide to resurfacing and replacement costs.
DIY kit or professional repair?
Kits are cheap and easy to find, but the repairs we redo most often are DIY ones that have discoloured or lifted. Getting it right first time is usually cheaper.
You can buy a DIY kit for most repairs, and they can make a small mark look better. Where they fall down is colour and preparation: they come in a handful of shades, and if the surface isn’t prepared the repair won’t last.
Other services in Eaton Constantine
FAQs for Eaton Constantine
Can you fix a peeling bath coating?
Yes. Stripping the old coating adds time, so it’s reflected in the quote.
Will there be fumes?
There is some smell while the coating is applied, which is why we ventilate the bathroom. It clears as the finish cures.
It’s been repaired before. Can you still fix it?
In most cases. The old repair comes out first, so let us know about it.
How do I book?
Use the quote form or ring 0345 017 0787.
Do you charge for travel?
No. Our quotes include travel, and we charge the same wherever you are.
Can you re-enamel a roll-top bath?
Yes, roll-tops are a big part of our work. The inside is resurfaced, and we can refinish the outside as well.
Which areas do you work in?
We work UK-wide. Our prices are the same everywhere.
Is it safe with children and pets around?
Yes, as long as they stay out of the room we are working in. We will tell you when the room can be used again.
What your bath is made of matters
Acrylic
We resurface acrylic baths as well, with a coating system suited to acrylic. The bath needs to be firm and well supported for the finish to last.
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. The enamel is the part that wears or chips, and that’s the part we put right.
Common problems we fix in Eaton Constantine
Once enamel loses its gloss, it stains more easily, and scrubbing it wears it down further. That’s the point where re-enamelling makes sense.
You may need us if you’ve spotted any of these:
- An old resurfacing that’s failing
- A dull, rough surface that will not come clean
- An outdated colour you’d like to change
- Staining under the taps and around the waste
Before you book anyone
- How your room will be protected
- How long the guarantee is and what it covers
- Whether the colour is mixed to match
- How soon you can use it again
What we can’t put right
To be straight with you, some problems need a different fix:
- Leaking taps or wastes (a plumber’s job)
- A poorly supported acrylic bath, until it’s firmed up
- A metal bath with a through crack
Send us photos and we’ll tell you honestly.
Surfaces we repair
- Pressed steel baths
- Acrylic baths
- Victorian roll-tops
- Cast iron baths
- Basins & shower trays
Where we work around Eaton Constantine
Eaton Constantine is about 6 miles south-west of Telford, in Shropshire. Our technicians come to clients in Eaton Constantine and the surrounding area, so nothing has to leave your home. Eaton Constantine is one of 433 places in Shropshire we cover. You can also see our page for Birmingham, about 32 miles away.
Our visits in SY5 work the same way as everywhere else we cover. Neighbouring places we cover include Garmston (1 mile east), Leighton (1 mile south-east), Buildwas (3 miles south-east), Little Wenlock (3 miles east) and Homer (3 miles south). Larger places within reach include Shrewsbury (8 miles north-west), Madeley (6 miles east), Bridgnorth (11 miles south-east), Coleham (7 miles north-west), Kingsland (8 miles north-west) and Belle Vue (7 miles north-west).
Around Eaton Constantine
In Eaton Constantine, that means homes near Church of St Mary, among other places. The nearest railway station is Wellington (Shropshire) station, about 4.5 miles north-east. Further afield, we also cover the area around Charlton Castle (3 miles north) and Wroxeter Roman Site And Museum (2.7 miles north-west). For a walk, there is The Ercall.
Work for landlords and builders
We work for landlords, letting agents and housing providers in Eaton Constantine as well as homeowners. A repair between tenants keeps the property empty for less time, and it costs much less than replacing.
Housing associations and facilities teams use us for planned and reactive repairs. Repairing in place avoids the disruption of a replacement, which matters when someone is living in the home.
How the visit works
We turn up at the time we agreed with you, introduces themselves and looks over the damage before anything else. The floor and nearby surfaces are covered before any work starts. Most visits take a full day, and we leave the room as we found it.
- We mask and protect the room and ventilate it.
- We clean and degrease the bath and repair any chips or rust.
- The surface is prepared and a bonding primer applied.
- Several coats of new finish are sprayed on.
- We leave it to cure, and it’s typically ready the next day.
Preparing for the visit
- Let the surface dry out before the visit
- Clear the area around the damage
- Keep pets and children out of the room while we work
How to get a price
Getting a price is easy: snap the damage close up and then the entire item, send them over with your postcode, and we’ll reply with a fixed quote. Quotes are free and no obligation.
Related advice
About our accreditations · Every repair comes with a one-year guarantee.
