Shropshire · England
Bath Re-enamelling in Garmston
Problem with your bath in Garmston? We put it right where it is, mix the colour on the day and guarantee the work for a year.
- Resurfacing from £350
- Enamel that’s lost its shine and feels rough
- A coating lifting around the plughole
About our bath re-enamelling in Garmston
The bath stays where it is, so your taps, tiles and plumbing are left alone. Most baths are done in one visit, and can be used again the day after. Common call-outs are for a coating lifting around the plughole and wear marks under the taps, across Victorian roll-tops, acrylic baths and cast iron baths.
Every repair comes with a one-year guarantee, wherever you are in Shropshire.
- Where
- Garmston (SY5)
- Region
- Shropshire
- Guarantee
- A year, on every repair
- Quote
- From £350. Fixed and free, based on pictures
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
Repair or replace: which is better?
If you like your bathroom but not your bath’s surface, resurfacing is the simplest answer. Nothing else is disturbed. Prices start from £350. Set against the cost of replacement, repairing typically costs far less, because there is no removal, plumbing or making good. Your fixed quote shows exactly what’s included.
What you get with us
- Nothing taken out or refitted
- Fixed prices from your pictures
- Straight answers about what a repair can do
- We leave the room as we found it
Read our full price list and guide to resurfacing and replacement costs.
Should I try a DIY kit first?
For a hairline mark somewhere you will never see, a kit may be enough. For damage in plain view, cracks, holes or rust, or coloured finishes, it’s worth having it done properly.
If you do try a kit, read the instructions carefully, ensure the area is clean and completely dry, and do not use it until it has fully cured. If it fails, we can still put it right.
Keeping it looking good
How the surface is treated afterwards matters:
- Get any chip repaired quickly
- Respect the curing time we give you
- Dry the bath after use to stop limescale
- A dripping tap should be fixed promptly
Use mild, non-abrasive cleaners, avoid suction bath mats, and keep bottles and razors off the surface.
Leave a peeling coating alone. Water gets under it and the damage spreads, so have it stripped and resurfaced.
About Garmston
Garmston is about 6 miles south-west of Telford, in Shropshire. Book a date that suits you, and we’ll give you an arrival time in advance, so you’re not left waiting in all day. Garmston is one of 433 towns and villages in Shropshire where we work. Our nearest city page is Birmingham, about 32 miles away.
All of SY5 is covered. Nearby, we also work in Eaton Constantine (1 mile west), Leighton (1 mile south-east), Buildwas (2 miles south-east), Little Wenlock (3 miles east) and Homer (3 miles south). Larger places within reach include Shrewsbury (8 miles north-west), Madeley (6 miles east), Bridgnorth (11 miles south-east), Coleham (8 miles north-west), Kingsland (8 miles north-west) and Belle Vue (8 miles north-west).
Near you in Garmston
Typical jobs here are in homes near Church of St Mary, among other places. Garmston’s nearest station is Wellington (Shropshire) station, roughly 4.4 miles north-east of the centre. Nearby you’ll also find Wroxeter Roman Site And Museum (3.1 miles north-west) and Charlton Castle (3.2 miles north). Open spaces near Garmston include The Ercall.
When to call us in Garmston
Frequently the bath has just had decades of use, and only the surface is worn. Underneath, a cast iron or steel bath is normally as strong as ever.
Contact us if you’ve noticed:
- Stains that won’t shift
- An old resurfacing that is failing
- A period or roll-top bath worth keeping
- Thin, worn enamel in places
What to look for in a quote
- A fixed price, and whether VAT is included
- How to look after the finish
- Whether they match the colour on site
- Who will actually do the work
For landlords and businesses
We are used to working with agents and managing companies. Send the address, pictures and access details.
Hotels, guest houses and holiday lets can’t afford rooms out of action for long, so we keep visits short and tidy. We will fit around changeovers where we can.
Different materials, different repairs
Acrylic
Acrylic baths can be resurfaced too, using a system that bonds to acrylic. It must be solid and not flex underfoot for the finish to last.
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. Only the enamel surface wears or chips, and that’s what we repair.
Also near Garmston
What else we do in Garmston
What affects the price in Garmston
Prices start from £350. Prices are worked out job by job. The main factors are:
- Unusual colours or finishes
- The size and number of damaged areas
- Doing more than one item at once
- What the surface is made of
We charge the same wherever you are, with no extra for Garmston. The job itself decides the price: how much damage, what it’s made of and how many items.
Getting a price from photos
Photographing the damage takes a minute, and it saves a visit. Try to send:
- One picture of the entire bath
- A close-up of the damage, in focus
- Natural light rather than flash
- A coin or ruler next to the damage for scale
You do not need a survey visit. Nearly every job can be priced from photos: we need a close-up, a wider picture and your postcode, and we’ll reply with a fixed quote.
The process
Once we are through the door, we keep the work contained to the one room. We mask off everything nearby, the job takes a full day, and we finish by cleaning up and talking you through the result.
- First we protect the bathroom and set up ventilation.
- We clean and degrease the bath and repair any chips or rust.
- The surface is prepared and a bonding primer applied.
- We spray several coats of new enamel finish.
- We leave it to cure, and it’s generally ready the next day.
Before we arrive
- Let us know about parking or access
- Let us know if it has been repaired before
- Have somewhere for us to park nearby if possible
Getting a price
If you’re in Garmston and want a price, pictures are the quickest way: a close-up, a wider shot and your postcode. We reply with a fixed quote and our next available dates.
Related advice
Questions from Garmston
When can you do it?
We’ll give you dates with your quote. If it’s urgent, say so and we’ll do what we can.
I rent my home. Can I book you?
We are happy to deal with the tenant, landlord or agent. Just ensure the landlord agrees.
Do you cover Garmston?
Yes, we do. We send a technician to Garmston for every job, with no extra charge for travel.
Is there a guarantee?
Yes, for a year. If there is a problem with the work in that time, we come back and put it right.
Are you a vetted contractor?
We are accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.
Can you make a coloured bath white?
Yes. Coloured baths can be resurfaced in white, and we can do the rest of the suite as well.
Do you do work for letting agents?
We do, regularly. We can quote for several properties together and work between tenancies.
Can I add another job to the visit?
Yes. Combining jobs on one visit brings the cost down. Send pictures of everything you’d like done.
About our accreditations · Every repair comes with a one-year guarantee.
