Wiltshire · England
Bath Re-enamelling for Bugmore homes
Fixed-price bath re-enamelling in Bugmore and the surrounding area, usually in one visit and guaranteed for a year.
- Resurfacing from £350
- Lots of chips and rust spots
- Staining under the taps and around the waste
Bath re-enamelling in Bugmore, done in place
If your bath is sound but looks tired, resurfacing is normally the best value. There’s no removal, plumbing or tiling involved. We regularly repair pressed steel baths, acrylic baths and cast iron baths, and the jobs we see most are wear marks under the taps and a coloured bath you want in white.
A one-year guarantee comes with the work, just as it does everywhere we cover.
- Where
- Bugmore (SP1, SP2, SP5)
- County
- Wiltshire
- Guarantee
- One year on every repair
- Quote
- From £350. Free, fixed price from pictures
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
Bugmore questions
Is the work guaranteed?
Yes: twelve months. If anything goes wrong with the repair within the year, we return to fix it.
Is it messy?
No. The work area is masked and covered, and we leave the room clean.
Is it OK to have pets in the house?
Keep pets and children away from the work area on the day.
Are there extra charges for Bugmore?
Travel is included in the price, with the same prices everywhere we work.
Do I have to be there?
We need someone to let us in. After that, you can carry on with your day.
Can you repair something that is been repaired before?
Yes, we frequently do. Removing the old work can add time, and that’s in the quote.
Do you cover the entire of Wiltshire?
Across the UK, and that includes Bugmore. Our prices are the same everywhere.
Will there be fumes?
Yes, while we’re applying the finish. We set up ventilation and the smell fades as it cures.
Keeping it looking good
So the finish stays in good condition:
- Wash away dyes and oils after use
- A dripping tap should be fixed promptly
- Leave the bath for the full curing time before using it
- Keep suction mats out of the bath
Rinse away dyes, oils and bath bombs straight after use, as they can stain. Repair dripping taps promptly.
Leave a peeling coating alone. Moisture gets underneath and makes it worse, so it’s better to have it stripped and redone.
Bugmore and nearby
Bugmore is about 1 mile south of Salisbury, in Wiltshire. Whether you’re in the middle of Bugmore or on the outskirts, we offer exactly the same service: a fixed price, a tidy visit and a guarantee. Bugmore is one of 425 towns and villages in Wiltshire where we work. You can also see our page for London, about 79 miles away.
Here we cover the SP1, SP2 and SP5 postcode area. We regularly work on streets such as Salt Lane, Scots Lane and Water Lane and the roads around them. You will find Bugmore on the A338, which makes it straightforward to reach. Other places close to Bugmore include Milford (1 mile north-east), Harnham (1 mile south-west), Salisbury (1 mile north), Laverstock (1 mile north-east) and Britford (1 mile south-east). Further out, we also cover Amesbury (7 miles north), Old Sarum (3 miles north), Bulford (9 miles north), Wilton (3 miles west), Tisbury (13 miles west) and Durrington (9 miles north).
Landmarks near Bugmore
Our customers here include homes close to Salisbury Sixth Form College, St Osmund's Catholic Primary School and The Chapter House and the streets around them. You’ll also find Church of St Osmund (Roman Catholic) (under half a mile west), Bishop Wordsworth's Church of England Grammar School (under half a mile west) and Corn Exchange (less than half a mile north-west). For rail, the closest station is Salisbury station, roughly 0.8 miles north-west of the centre. Other landmarks nearby include Harvard Hospital (0.9 miles south-west) and John Creasey Museum (under half a mile north-west). For a walk, there is Harnham Hill.
- Other local spots include Salisbury (under half a mile north-west)
Different materials, different repairs
Roll-top and period baths
We can resurface a roll-top inside and out, and the outside can be refinished too.
Pressed steel
Under the enamel of a steel bath is thin metal. Once a chip exposes it, rust follows quickly, so we treat and seal the metal before filling.
Should I try a DIY kit first?
The difference between a kit and a professional repair is mostly in the preparation and colour. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, then guarantee it for a year.
We understand the appeal of fixing it yourself. The trouble is that kit repairs often look fine at first and then fail, and the old filler has to come out before a proper repair.
Landlords, agents and businesses in Bugmore
We regularly price jobs from inventory or check-out photos. That means we can quote before you even visit the property, and we liaise with tenants about access if you’d like us to.
We carry out planned and one-off repairs for housing associations and facilities teams in Wiltshire and across the UK. Repairing in place avoids the disruption of a replacement, which is easier on the people living there.
How the visit works
We agree an arrival time beforehand. On site, it takes a full day in most cases. The room is left tidy.
- We sheet, mask and ventilate the room.
- We remove the old silicone and deep clean the bath.
- We repair chips, rust spots and pitting.
- We key the bath and apply a bonding primer.
- The new finish is sprayed on in several coats and left to cure until the following day.
How to prepare
- Tell us if there are stairs or a lift
- Point us to the nearest place to park
- Have a window or extractor fan available
Get a quote
Getting a price is easy: snap the damage close up and then the whole item, send them to us with your postcode, and you’ll get a fixed quote back. There’s no charge for the quote and no obligation.
Read more
Repair or replace: which is better?
Replacing the bath means a plumber, lifting out the old bath, making good the walls and tiles and several days without a working bathroom. Re-enamelling gives the bath a new finish without moving it. Prices start from £350. A few things move the price: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Send photos and you’ll get a fixed figure.
Why us?
- No need to remove anything
- A fixed quote before booking
- Honest advice, even when it means no job
- Colour-matched on site
Read our pricing and resurfacing vs replacement cost guide.
Other services in Bugmore
Do you need bath re-enamelling in Bugmore?
Enamel wears gradually. Years of cleaning, hard water and hot baths dull the surface, starting where water runs and sits.
It’s worth getting a quote if you see:
- An outdated colour you’d like to change
- An original cast iron bath that needs restoring
- Chips and rust in more than one place
- Thin, worn enamel in places
Questions to ask before you book
- How your room will be protected
- How the colour is matched
- Whether there are any call-out or travel charges
- How long the guarantee is and what it covers
Prices and what affects them
Prices start from £350. Every quote is fixed and free. What we look at:
- How many items we do on one visit
- What kind of damage it is
- Where the damage is and how we get to it
- What the surface is made of
Most people are surprised how affordable a repair is, especially compared with replacing and refitting. Photos let us give you the exact figure.
Getting a price from pictures
Before you send pictures, a few simple things make all the difference:
- Where you are, by postcode
- A clear, close picture of the problem area
- Something in shot to show the size
- A picture taken from further back
Getting a quote takes a couple of minutes: photograph the damage, then the entire bath, add your postcode and send them to us. You’ll get a fixed price, not an estimate.
About our accreditations · Every repair comes with a one-year guarantee.
