South Ayrshire · Scotland
Bath Re-enamelling in Dalmellington
Problem with your bath in Dalmellington? We repair it in place, mix the colour on the day and guarantee the work for a year.
- Resurfacing from £350
- Worn patches where water runs and sits
- A coloured bath you want in white
Bath re-enamelling at your home in Dalmellington
We re-enamel a lot of period and roll-top baths, which are heavy, hard to move and costly to replace. Resurfacing them in place keeps the original bath. We work on pressed steel baths, acrylic baths and cast iron baths, and common reasons people get in touch are an outdated colour you’d like to change and wear marks under the taps.
Every repair is covered by our one-year guarantee, wherever you are in South Ayrshire.
- Where
- Dalmellington (KA6)
- County
- South Ayrshire
- Warranty
- 12 months on all our work
- Price
- From £350. Free, fixed price from pictures
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
How we price bath re-enamelling
Resurfacing from £350. Each job gets its own fixed price. This is what makes a difference:
- Where the damage is and how we get to it
- What the surface is made of
- How many areas need work
- The colour and finish to match
The price reflects the work involved, not where you live. The full price is agreed before booking, with no extras added later.
Quotes from your photos
You can take the pictures on your phone, there’s no need for anything special. Ensure they show:
- A wider photo showing the entire bath
- The material, if you know it
- Good light, ideally daylight, without flash glare
- The postcode, so we can plan the visit
For a price in Dalmellington, the easiest route is photos: a close-up, a wider shot and your postcode. You’ll get a fixed quote with dates to choose from.
Landlords, agents and businesses in Dalmellington
We carry out planned and one-off repairs for housing associations and facilities teams in South Ayrshire and across the UK. A repair avoids taking out and refitting, which is easier on the people living there.
Builders use us to fix snagging damage before handover. We can visit several plots in one trip.
Looking after it afterwards
It’s all simple stuff:
- Do not leave a chip unrepaired
- Respect the curing time we give you
- A quick wipe after use keeps limescale away
- Never use suction bath mats
Avoid hair dye, bath bombs and oils sitting on the surface, because they can mark the finish. Repair dripping taps promptly.
Worn enamel only gets rougher with time, and any rust spreads underneath. Resurfacing sooner means less repair work first.
Should you replace it?
If the bath is sound, re-enamelling is generally much cheaper than replacing it, when you count removal, plumbing, tiling and decorating. It’s much quicker too. Our bath re-enamelling starts from £350. It helps to know what pushes a price up or down: access, material, the extent of the damage and whether we can do several items together. Photos let us give you a fixed figure.
What you get with us
- Straight answers about what a repair can do
- Usually one visit, start to finish
- No need to remove anything
- Work done at your home or business
Take a look at our pricing and bath cost comparison.
Do you need bath re-enamelling in Dalmellington?
Enamel doesn’t fail overnight. Years of cleaning, hard water and hot baths dull the surface, typically first under the taps and around the waste.
Clients typically contact us about:
- An old resurfacing that is failing
- Several chips and rust patches
- Wear marks under the taps
- Enamel that’s lost its shine and feels rough
Before booking anyone
- How long it needs to cure
- Whether they match the colour on site
- How changes to the job are handled
- What the guarantee covers, and for how long
How it works
Arrival times are agreed in advance. On site, it takes most of the day in most cases. The room is left tidy and you will know when it can be used.
- First we look the bath over and confirm the finish.
- Taps, tiles and the floor are masked off.
- We degrease the bath, fix any damage and key the surface.
- Primer and finish coats are applied.
- The masking comes off, we tidy up and tell you when it can be used.
Preparing for the visit
- Have somewhere for us to park nearby if possible
- Avoid using the area for a few hours before we arrive
- Let us know if it has been repaired before
Ask for a price
No survey visit is needed: we price from pictures. Use the quote form, or ring 0345 017 0787 to talk it through, and you will get a fixed figure back.
Advice
Questions from Dalmellington
Will it make a mess?
No. The work area is masked and covered, and we take our waste away with us.
How long does re-enamelling last?
A well-prepared finish lasts a long time if it’s looked after. Avoid abrasive cleaners and suction mats.
How long will the bath be out of use?
Most baths are done in a day and can be used the day after. We’ll confirm timings when we quote.
Is it OK to have pets in the house?
On the day, the room should be kept clear of pets and children.
How much does bath re-enamelling cost in Dalmellington?
Prices start from £350. We give a fixed price based on pictures of the damage. Send a close-up of the damage and a wider photo and your postcode.
Do you need to take the bath out?
No, it stays where it is. We work on the bath in place, with the room protected and ventilated.
Will there be fumes?
A little, during the work. Ventilation keeps it down, and it fades as the finish cures.
Can you redo someone else’s repair?
In most cases. We remove the old repair before doing a new one.
Honest limits
In fairness, there are a few things a repair won’t fix:
- Holes rusted through the metal
- Problems we can’t see until an old finish comes off
- An acrylic bath that flexes badly underfoot
If in doubt, send pictures and we’ll say what we think.
What we work on
- Cast iron baths
- Pressed steel baths
- Victorian roll-tops
- Basins & shower trays
- Acrylic baths
More services for Dalmellington
Our work in Dalmellington
Dalmellington is about 13 miles south-east of Ayr, in South Ayrshire. We travel to homes and businesses in Dalmellington and nearby villages, so there is no workshop to go to. Dalmellington is one of 52 towns and villages in South Ayrshire where we work. Our nearest city page is Glasgow, about 37 miles away.
Here we cover the KA6 postcode area. That includes homes on High Street, Croft Street and Church Hill and the roads around them. Close by, we cover Bellsbank (1 mile south), Waterside (3 miles north-west), Patna (5 miles north-west), Rankinston (6 miles north) and Straiton (6 miles west). We also work in nearby towns such as Ayr (13 miles north-west), Prestwick (14 miles north-west), Heathfield (14 miles north-west), Belmont (12 miles north-west), Forehill (12 miles north-west) and Maybole (11 miles west).
Around Dalmellington
Typical jobs here are in homes near Kirk of The Covenant, Doon Tavern and Doon Academy. A little further out are Doon Valley Museum (less than half a mile south). Not far away are Windy Standard and Bogton Loch.
Materials and what they mean for the repair
Cast iron
Re-enamelling suits cast iron baths perfectly. The body lasts for generations; only the enamel wears, so resurfacing gives them a new life.
Pressed steel
Pressed steel baths take a new finish well, once any rust has been treated. Steel often rusts by the plughole, so we pay close attention there.
About our accreditations · Every repair comes with a one-year guarantee.
