Cumbria · England
Bath re-enamelling & resurfacing in Newton, Cumbria
Bath re-enamelling in and around Newton: a fixed quote from photos, a tidy visit and a one-year guarantee.
- Resurfacing from £350
- An old resurfacing that’s failing
- Thin, worn enamel in places
What affects the price in Newton
Resurfacing from £350. We do not charge extra for travel to Newton. The price depends on:
- Whether it’s a chip, crack, burn or wear
- How hard the colour is to match
- Whether we combine several jobs
- How much damage there is
Rather than charging by the hour, we price the entire job up front. It depends on the damage, the material and access.
How to get a fixed quote
Most quotes are done from photos alone. To help us price it:
- Daylight if possible, and no flash reflection
- A coin or ruler next to the damage for scale
- Any details about the material
- The postcode, so we can plan the visit
You do not need a survey visit. Photos are enough for us to price nearly every job: we need a close-up, a wider picture and your postcode, and we will reply with a fixed quote.
Bath re-enamelling in Newton without replacing anything
We do not move the bath, so the taps, tiles and plumbing are not touched. It usually takes one visit, with the bath ready to use the following day. If you’re dealing with a peeling or bubbling previous coating and wear marks under the taps, we can typically put it right, on Victorian roll-tops, cast iron baths and basins & shower trays alike.
You get a one-year guarantee, the same in Newton as everywhere else we work.
- Where
- Newton (LA13)
- County
- Cumbria
- Warranty
- One year on every repair
- Price
- From £350. Fixed and free, based on pictures
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
Different materials, different repairs
Acrylic
Acrylic is light and warm to the touch, but it needs firm support underneath. Cracks are strengthened from behind before the front is finished.
Pressed steel
Pressed steel baths take a new finish well, once any rust has been treated. Rust around the waste is common on steel, so we check it carefully.
More services for Newton
What we do, step by step
Once we’re through the door, the aim is to do the job without disturbing the rest of your home. Surfaces nearby are masked off, the job takes the best part of a day, depending on what we find, and we finish by cleaning up and talking you through the result.
- First we look the bath over and confirm the finish.
- Taps, tiles and the floor are masked off.
- We degrease the bath, fix any damage and key the surface.
- We apply the primer and then the finish coats.
- We remove the masking, tidy up and give you the curing time.
Getting ready for the visit
- Let us know about parking or access
- Tell us if there are stairs or a lift
- Mention any earlier repairs or resurfacing
Get a quote
If you’re in Newton and want a price, pictures are the quickest way: a close-up, a wider shot and your postcode. You’ll get a fixed quote with dates to choose from.
Advice
Common problems we fix in Newton
Enamel does not fail overnight. Years of cleaning, hard water and hot baths wear the gloss away, usually first under the taps and around the waste.
Look out for any of the following:
- Chips and rust in more than one place
- An outdated colour you’d like to change
- An original cast iron bath that needs restoring
- An old resurfacing that’s failing
What your quote should include
- How soon you can use it again
- How the colour is matched
- The length of the guarantee and what it covers
- Aftercare advice
Landlord and trade work in Newton
We work for landlords, letting agents and housing providers in Newton as well as householders. A repair between tenants keeps the property empty for less time, and it costs much less than replacing.
We regularly work with letting and managing agents. Send the address, pictures and access details.
FAQs for Newton
Can a failed resurfacing be redone?
Yes, we do this regularly. Stripping the old coating adds time, so it’s reflected in the quote.
What does bath re-enamelling cost?
Resurfacing from £350. Every job gets a fixed quote based on photos of the damage. Send a close-up of the damage and a wider photo with your LA13 postcode.
What happens if you find more damage?
If we find something the photos didn’t show, we explain it first. You decide whether to go ahead.
Can you quote from photos?
Yes, almost always. Clear photos let us give you a fixed price without visiting.
Is there a guarantee?
Yes: twelve months. If there’s a problem with the work in that time, we come back and put it right.
How quickly can you book me in?
We will give you dates with your quote. Tell us if you need it done quickly.
I’m a tenant. Can you help?
We are happy to deal with the tenant, landlord or agent. Get your landlord’s agreement first.
Does someone need to be in?
Yes. We need access to the room while we work, at a time we agree with you.
What we can’t put right
Some problems need a builder, plumber or fitter rather than us:
- Leaking taps or wastes (a plumber’s job)
- A poorly supported acrylic bath, until it’s firmed up
- A cast iron or steel bath that is cracked right through
Not sure? Send pictures and we’ll give you a straight answer.
What we work on
- Victorian roll-tops
- Acrylic baths
- Basins & shower trays
- Pressed steel baths
- Cast iron baths
Keeping it looking good
Once the work has cured, treat it gently:
- Store bottles off the bath
- Wipe the bath dry after use in hard water areas
- Fix dripping taps quickly
- Wash away dyes and oils after use
Wipe the bath dry after use where you can, especially in hard water areas, and rinse away any product left on the surface.
Leave a peeling coating alone. Water gets under it and the damage spreads, so it’s better to have it stripped and redone.
Should I try a DIY kit first?
DIY kits are sold for most surfaces, and they can tidy up a tiny mark. Where they fall down is colour and preparation: they come in a handful of shades, and if the surface isn’t prepared the repair won’t last.
If you do try a kit, read the instructions carefully and work on a clean, dry surface, and give it the full curing time. If it fails, we can still put it right.
Newton and the surrounding area
Newton is about 2 miles north-east of Barrow-in-Furness, in Cumbria. Our work suits any type of property, from flats and terraces to detached houses and new builds, as well as offices, shops and holiday lets. Newton is one of 438 towns and villages in Cumbria we cover. We work right across the region, from Newton to Liverpool (about 51 miles away).
Jobs in LA13 work the same way as everywhere else we cover. That includes homes on Newton Cross Road, Miller Close and Newton Road and the roads around them. Other places close to Newton include Stank (1 mile south), Stainton with Adgarley (1 mile north-east), Dendron (1 mile south-east), Dalton-in-Furness (1 mile north) and Leece (2 miles south-east). Further out, we also cover Ulverston (5 miles north-east), Vickerstown (4 miles south-west), Millom (6 miles north-west), Grange-over-Sands (11 miles east), Askam in Furness (4 miles north) and Barrow Island (3 miles south-west).
Around Newton
Locally, our jobs take us to homes close to Newton Primary School, Barrow-in-Furness Sixth Form College and Church of St Matthew, among other places. For rail, the closest station is Dalton station, roughly 1.3 miles north of the centre. Other landmarks nearby include Furness Abbey Museum (0.8 miles west) and Dalton Castle (1.4 miles north). For a walk, there’s North Walney and Birkrigg Common.
About our accreditations · Every repair comes with a one-year guarantee.
