Wirral · England
Bath re-enamelling & resurfacing in Dawpool, Wirral
Full bath re-enamelling and resurfacing for homes and businesses in Dawpool and across Wirral. Send pictures for a free, fixed quote.
- Resurfacing from £350
- Several chips and rust patches
- Worn patches where water runs and sits
Bath re-enamelling in Dawpool, done in place
Re-enamelling gives a worn bath a new glossy surface without taking anything out. It suits baths that are dull, stained, rough or chipped all over. Typical jobs include wear marks under the taps and a dull, rough surface that won’t come clean, in pressed steel baths, acrylic baths and cast iron baths.
A one-year guarantee comes as standard.
- Area
- Dawpool (CH48, CH61)
- Area hub
- Wirral
- Cover
- 12 months on all our work
- Quotes
- From £350. Free and fixed, from your photos
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
What happens on the day
We begin by going over the job with you, so you know exactly what we are doing. Next, we cover and mask everything nearby and we start. You can expect it to take a full day.
- First we protect the bathroom and set up ventilation.
- We clean and degrease the bath and repair any chips or rust.
- We prepare the surface and apply a bonding primer.
- We spray several coats of new enamel finish.
- Once cured, normally by the day after, the bath is ready.
Getting ready for the visit
- Tell us about any previous repairs or coatings
- Clear the area around the damage
- Open a window if you can
How to get a price
To get a price, send two or three pictures through our quote form or ring us. We’ll tell you honestly whether it can be repaired.
Read more
Dawpool: your questions answered
Can landlords book you?
Yes. We work for landlords, agents, builders and businesses as well as homeowners in Dawpool.
What do you need from me?
Some pictures, your postcode and how to reach you. On the day, we only need access to the room.
Can I get a quote without a visit?
Generally, yes. Clear pictures let us give you a fixed price without visiting.
Is it worth repairing rather than replacing?
Generally, yes. A repair skips the removal, fitting and redecorating. We’ll be honest if it’s not worth it.
Do I have to be there?
We need someone to let us in. After that, you can carry on with your day.
Is it safe with children and pets around?
We ask you to keep children and pets out of the room while we work. The rest of the house is unaffected.
What does bath re-enamelling cost?
Prices start from £350. Every job gets a fixed quote from your pictures. Send a close-up and a picture of the whole item and your postcode.
Do you cover the whole of Wirral?
Everywhere in the UK, Dawpool included. There’s no extra charge for travel.
How we price bath re-enamelling
Resurfacing from £350. We price every job individually, from your pictures. What matters most is:
- How many items we do on one visit
- Any earlier repairs that need removing first
- How much damage there is
- The material
The price reflects the work involved, not where you live. The full price is agreed before you book, with no extras added later.
Getting a price from pictures
It only takes a minute to photograph the damage. Try to send:
- Daylight if possible, and no flash reflection
- A coin or ruler next to the damage for scale
- One picture of the entire bath
- Your postcode, so we can check dates
Getting a price is easy: snap the damage close up and then the entire item, send them to us with your postcode, and you will get a fixed price back. Quotes are free and no obligation.
When we would advise against a repair
Some problems need a builder, plumber or fitter rather than us:
- Plumbing leaks, which need a plumber
- A bath that’s rusted through
- A metal bath with a through crack
Send us pictures and we’ll tell you honestly before you book.
Materials we repair
- Basins & shower trays
- Acrylic baths
- Cast iron baths
- Victorian roll-tops
- Pressed steel baths
Looking after it afterwards
It’s all simple stuff:
- Avoid suction-cup mats
- Have chips seen to early
- A quick wipe after use keeps limescale away
- Fix dripping taps quickly
A quick rinse and wipe after use helps, particularly where water is hard, so limescale cannot build up.
On a worn bath, rust spots keep spreading, and each one adds to the preparation. Resurfacing before they spread keeps it simpler.
Different materials, different repairs
Roll-top and period baths
We can resurface a roll-top inside and out, and the outside can be refinished too.
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Once a chip exposes it, rust follows quickly, so the metal is treated and sealed before the repair.
DIY repairs versus a professional job
You can buy a DIY kit for most repairs, and they can make a small mark look better. Where they fall down is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler frequently lifts.
It’s tempting to reach for a kit, but the repairs we redo most often are DIY ones that have discoloured or lifted. Getting it right first time is usually cheaper.
When to call us in Dawpool
Enamel wears gradually. Abrasive cleaners, limescale and years of use dull the surface, starting where water runs and sits.
People generally call us when they notice one of these:
- An old resurfacing that’s failing
- A bath that stays dull however much you clean it
- Worn patches where water runs and sits
- Brown or grey marks that do not clean off
Questions to ask before you book
- What the guarantee covers, and for how long
- Whether there are any call-out or travel charges
- Whether they match the colour on site
- Aftercare advice
For landlords and businesses
We regularly work with letting and managing agents. Just send photos, the address and how to get access and we will arrange it.
For anyone letting property in or around Dawpool, we can repair and quote for several addresses together. Just send pictures for each address and we will come back with a combined price.
Covering Dawpool
Dawpool is about 2 miles south of West Kirby, in Wirral. Our work suits any type of property, old or new, large or small, as well as offices, shops and holiday lets. Our technicians cover all 44 towns and villages across Wirral, from the larger towns to small villages. Our nearest city page is Liverpool, about 10 miles away.
We work across CH48 and CH61 and the streets around it. From Parkdale, Mereworth and Meadow Gate or a nearby road, a technician can come to you. Nearby, we also work in Caldy (1 mile north), Thurstaston (1 mile east), Newton (2 miles north), Irby Hill (2 miles north-east) and West Kirby (2 miles north). Within a short drive, we also cover Birkenhead (5 miles north-east), Wallasey (7 miles north-east), Bebington (7 miles east), Heswall (3 miles south-east), Moreton (4 miles north-east) and Bromborough (7 miles east).
Around Dawpool
Typical jobs here are in homes near Wirral Country Park, Church of the Resurrection and All Saints and Thurstaston Dawpool CofE Primary School, among other places. For rail, the closest station is West Kirby station, roughly 2.1 miles north-west. Well-known places in the area include Arrowe Park Hospital (3 miles north-east) and Basingwerk Manor (4.6 miles south-west). Open spaces near Dawpool include Bidston Hill and West Kirby Marine Lake.
- Parks and local facilities nearby include Heswall cum Oldfield (2.3 miles south-east)
Also near Dawpool
More services for Dawpool
About our accreditations · Every repair comes with a one-year guarantee.
