Kent · England
Bath Re-enamelling for Densole homes
Damaged bath in Densole? We put it right where it is, match it on site and back it with a one-year guarantee.
- Resurfacing from £350
- Wear marks under the taps
- Stains that will not shift
Repairs by material
Cast iron
A cast iron bath is heavy enough that most people never want to move it. Only the enamel surface wears or chips, and that is the part we put right.
Pressed steel
Steel baths re-enamel well, once any rust has been treated. Steel frequently rusts by the plughole, so we pay close attention there.
About our bath re-enamelling in Densole
We resurface cast iron, steel and acrylic baths, including roll-tops and period baths. The finish is sprayed on in several coats over a bonding primer, once the bath has been cleaned, repaired and prepared. If you are dealing with chips and rust in more than one place and an old resurfacing that’s failing, we can help, on pressed steel baths, basins & shower trays and Victorian roll-tops alike.
All our work comes with our one-year guarantee, wherever you are in Kent.
- Location
- Densole (CT18)
- Area hub
- Kent
- Cover
- One year on every repair
- Price
- From £350. Free, fixed quote from pictures
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
When a repair is not the answer
We’ll always be straight with you, so here’s what a repair cannot fix:
- An acrylic bath that flexes badly underfoot
- Anything hidden under an old coating, until we remove it
- Plumbing leaks, which need a plumber
Not sure? Send pictures and we’ll give you a straight answer.
What we work on
- Victorian roll-tops
- Acrylic baths
- Cast iron baths
- Pressed steel baths
- Basins & shower trays
DIY kit or professional repair?
It’s tempting to reach for a kit, but many of the jobs we do start with putting right a DIY repair. Getting it right first time is normally cheaper.
What a professional repair adds is preparation, colour matching and finishing. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, then guarantee it for a year.
How the visit works
You don’t need to empty the room beforehand. We bring everything we need with us, lay protective sheets and get going once we’ve agreed what we are doing. Most jobs take the best part of a day, and you can get on with other things while we’re there.
- We sheet, mask and ventilate the room.
- Old sealant is cut out and the bath is deep cleaned.
- Chips, rust and pitting are repaired.
- The surface is keyed and primed for the new finish.
- The new finish is sprayed on in several coats and left to cure until the next day.
Getting ready for the visit
- Keep pets and children out of the room while we work
- Make sure the room can be ventilated
- Avoid using the area for a few hours before we arrive
Get a quote
Ring 0345 017 0787, or send us photos through the quote form. With a clear picture of the damage and one of the whole bath, we can give you a fixed quote the same day in most cases.
Advice
Common problems we fix in Densole
Enamel doesn’t fail overnight. Abrasive cleaners, limescale and years of use dull the surface, usually first under the taps and around the waste.
Signs it’s time to call us include:
- Stains that will not shift
- Worn patches where water runs and sits
- Chips and rust in more than one place
- A coloured bath you want in white
Comparing quotes
- What prep work is covered
- How the colour is matched
- Whether the price covers travel
- What the guarantee covers, and for how long
What bath re-enamelling costs
Resurfacing from £350. Prices are worked out job by job. What matters most is:
- The material and finish
- Access to the area
- What kind of damage it is
- How many items we do on one visit
A repair is priced on what needs doing, not your postcode. The full price is agreed before booking, with no extras added later.
Quotes from your photos
Good photos mean an accurate price. Here’s what helps:
- Natural light rather than flash
- The postcode, so we can plan the visit
- A close-up of the damage, in focus
- Any details about the material
Getting a price is easy: take a close-up of the damage and a photo from further back, send them over with your postcode, and you will get a fixed price back. Quotes are free and you are under no obligation.
Why repair rather than replace?
Replacing a bath normally involves a plumber, a fitter and a tiler. Re-enamelling takes one technician and normally one day, and the bath can be used the day after. Prices start from £350. There are no surprise extras on the day. What we quote from your photos is what you pay, unless the damage turns out to be different, in which case we talk to you first.
What you get with us
- Most jobs done in one visit
- One price list for the whole UK
- Every repair guaranteed for a year
- CHAS, Constructionline and SafeContractor accredited
Take a look at our prices page or guide to resurfacing and replacement costs.
Densole: your questions answered
Do I have to be there?
Someone needs to let us in and show us the job. After that, you can carry on with your day.
I’m a tenant. Can you help?
Yes, though it’s best to check with your landlord first. Landlords are frequently glad to have it sorted before the end of a tenancy.
Do you need to take the bath out?
No. It’s re-enamelled where it stands, so nothing else is disturbed.
When can you do it?
Your quote comes with available dates. Tell us if you need it done quickly.
Can you redo someone else’s repair?
Yes, we frequently do. It can add a little time, which we include in the quote.
What happens after I send photos?
You get a fixed price and available dates. If we need another angle, we’ll ask.
Can you re-enamel a roll-top bath?
Yes, roll-tops are a big part of our work. The inside is resurfaced, and we can refinish the outside as well.
Can you quote from photos?
In nearly every case. If photos don’t show enough, we’ll ask for another angle.
For landlords and businesses
Letting agents frequently send us photos straight from the inventory. That means we can quote before you even visit the property, and we liaise with tenants about access if you’d like us to.
Rental properties take more wear, and replacing things at every changeover adds up. Repairing between tenants keeps the property presentable for less.
About Densole
Densole is about 3 miles north of Folkestone, in Kent. Our technicians come to customers in Densole and nearby villages, so you do not need to take anything anywhere. Densole is one of 922 places in Kent we cover. We work right across the region, from Densole to London (about 60 miles away).
Jobs in CT18 work the same way as everywhere else we cover. Streets in the area include St John's Close, St John's Way and Canterbury Road. We also cover the places around Densole: Hawkinge (1 mile south), Swingfield Minnis (1 mile north), Old Hawkinge (2 miles south-east), Arpinge (2 miles south-west) and Selsted (2 miles north). We also work in nearby towns such as Ashford (13 miles west), Canterbury (11 miles north), Dover (6 miles east), Folkestone (3 miles south), Deal (12 miles north-east) and Hythe (5 miles south-west).
Local landmarks in Densole
In Densole, that means homes near Hawkinge Primary School and St Luke's. For rail, the closest station is Folkestone West station, about 3.1 miles south of the centre. Other landmarks nearby include Elham Valley Countryside Centre And Railway Museum (2.7 miles south-west) and Folkestone Castle (2.1 miles south). Open spaces near Densole include Cheriton Hill.
Also near Densole
What else we do in Densole
About our accreditations · Every repair comes with a one-year guarantee.
