Derbyshire · England
Bath Re-enamelling for Dove Holes homes
Bath re-enamelling in Dove Holes without the cost of replacing. Get a fixed price from your photos, then book a visit.
- Resurfacing from £350
- Lots of chips and rust spots
- A roll-top that’s seen better days
Bath re-enamelling in Dove Holes without replacing anything
Most baths are re-enamelled in a day. Nothing is disconnected or removed. We work on basins & shower trays, Victorian roll-tops and cast iron baths, and the jobs we see most are an outdated colour you’d like to change and an old resurfacing that’s failing.
Big or small, it’s backed by a one-year guarantee.
- Where
- Dove Holes (SK17)
- County
- Derbyshire
- Warranty
- One year on every repair
- Quotes
- From £350. Free, fixed price from pictures
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
Where we work around Dove Holes
Dove Holes is about 3 miles north of Buxton, in Derbyshire. We agree a date that works for you, and we’ll give you an arrival time in advance, so you are not left waiting in all day. Our repair technicians cover 532 places across Derbyshire. Our nearest city page is Manchester, about 18 miles away.
Every address in SK17 is covered, from the main roads to the quietest streets. Streets in the area include Station Road, Hallsteads and Meadow Close, all of which we cover. We also cover the places around Dove Holes: Peak Dale (1 mile south-east), Smalldale (1 mile south-east), Batham Gate (1 mile south), Sparrowpit (2 miles north-east) and Upper End (2 miles south-east). Larger places within reach include Buxton (3 miles south), Glossop (10 miles north), New Mills (6 miles north-west), Hadfield (11 miles north), Bakewell (11 miles south-east) and Darley Dale (15 miles south-east).
Around Dove Holes
We visit homes around Chapel-en-le-Frith High School, St Paul and Dove Holes CofE Primary School. Dove Holes has its own railway station: Dove Holes station. A little further out are Buxton Motor Museum (2.9 miles south) and Cavendish Hospital (3.1 miles south-west). The countryside around Dove Holes includes Combs Moss and Harpur Hill Quarry.
Different materials, different repairs
Cast iron
Cast iron baths are the classic candidate for re-enamelling. They’re built to last, and only the surface wears, so a new finish makes them look new again.
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Exposed steel rusts quickly, so we treat and seal the metal before filling.
Common problems we fix in Dove Holes
Enamel doesn’t fail overnight. Abrasive cleaners, limescale and years of use wear the gloss away, normally first under the taps and around the waste.
Look out for these signs:
- Worn patches where water runs and sits
- Enamel that is lost its shine and feels rough
- Several chips and rust patches
- A roll-top that is seen better days
What to look for in a quote
- How long it needs to cure
- Whether a trained technician does the job
- How the colour is matched
- If travel is included in the price
Dove Holes questions
What if the damage is worse than the pictures show?
It’s rare, but if it happens we talk to you first. You decide whether to go ahead.
Do you work in Dove Holes?
Yes, we do. Repair technicians travel to Dove Holes from across the region, with no extra charge for travel.
Do I need to be at home?
Yes. The technician needs access to the room for the visit, at a time that suits you.
Is my repair covered?
Every repair comes with our one-year guarantee. Ask us what it covers when you get your quote.
Can you do the outside of a roll-top?
Yes, roll-tops are a big part of our work. The inside is resurfaced, and we can refinish the outside as well.
Is it OK to have pets in the house?
Yes, as long as they stay out of the room we’re working in. We will let you know when it’s safe to use again.
Do you need to take the bath out?
No. It’s re-enamelled where it stands, so the tiles and taps stay put.
I rent my home. Can I book you?
Of course. Check with your landlord; we can send the quote to them too.
For landlords and businesses
Hospitality businesses need rooms back in use quickly, so most of our work is done in a single visit. We’ll fit around changeovers where we can.
Builders use us to fix snagging damage before handover, saving last-minute replacements. We can visit several plots in one trip.
Can I fix it myself?
Kits are cheap and easy to find, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is generally the cheaper route.
DIY kits are sold for most surfaces, and they can tidy up a tiny mark. The trouble is colour and preparation: they come in a handful of shades, and if the surface is not prepared the repair will not last.
How it works
When we visit, the technician arrives at the agreed time, protects the room with dust sheets and masking and gets started. The job usually takes the best part of a day. We tidy up before we leave and let you know when you can use it again.
- First we protect the bathroom and set up ventilation.
- Next we degrease the bath and fix chips and rust spots.
- We prepare the surface and apply a bonding primer.
- Several coats of new finish are sprayed on.
- The bath is left to cure and can usually be used the next day.
Before we arrive
- Open a window if you can
- Avoid using the area for a few hours before we arrive
- Tell us if there are stairs or a lift
Getting a price
Ring 0345 017 0787, or send us photos through the quote form. With a clear picture of the damage and one of the whole bath, we can give you a fixed price the same day in most cases.
Read more
Keeping it looking good
Aftercare is simple, and it makes a real difference:
- Store bottles off the bath
- Do not use the bath until it has fully cured
- Fix dripping taps quickly
- Wash away dyes and oils after use
A quick rinse and wipe after use helps, particularly where water is hard, so limescale can’t build up.
The longer worn enamel is left, the rougher it gets, and any rust spreads underneath. Acting earlier keeps the preparation simpler.
Also near Dove Holes
Also in Dove Holes
What a repair cannot fix
We’d rather lose a job than do one that won’t last, so these are the limits:
- Acrylic that moves when you stand in it
- Holes rusted through the metal
- A bath split right through the body
If in doubt, send photos and we’ll say what we think before you book.
Materials we repair
- Victorian roll-tops
- Acrylic baths
- Basins & shower trays
- Cast iron baths
- Pressed steel baths
Prices and what affects them
Prices start from £350. You will know the full cost before you book. We look at:
- What the surface is made of
- Whether we combine several jobs
- The colour and finish to match
- The type of damage
Set against the cost of replacement, repairing usually costs far less, because there’s no removal, plumbing or making good. The quote lists exactly what you are paying for.
How to get a fixed price
Photographing the damage takes a minute. Please include:
- A coin beside the damage so we can judge size
- Any earlier repairs or coatings
- Where you are, by postcode
- One picture of the entire bath
You do not need a survey visit. Photos are enough for us to price nearly every job: we need a close-up, a wider picture and your postcode, and we’ll come back to you with a fixed figure.
About our accreditations · Every repair comes with a one-year guarantee.
