Lincolnshire · England
Bath Re-enamelling for Driby homes
Full bath re-enamelling and resurfacing for householders, landlords and businesses in Driby. Send pictures for a free, fixed quote.
- Resurfacing from £350
- A peeling or bubbling previous coating
- Brown or grey marks that don’t clean off
Bath re-enamelling in Driby without replacing anything
Resurfacing renews the whole surface of the bath without taking anything out. It’s the answer when the entire bath is tired rather than one spot. Whether it’s a roll-top that’s seen better days and a bath that stays dull however much you clean it, we can help, whatever the material.
The work is covered for a year after we finish. Just call us if there’s a problem and we’ll sort it.
- Area
- Driby (LN13)
- Region
- Lincolnshire
- Guarantee
- A year, on every repair
- Quotes
- From £350. Fixed and free, based on pictures
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
How we price bath re-enamelling
Prices start from £350. There is no area surcharge for Driby. The price reflects:
- Any earlier repairs that need removing first
- How many items we do on one visit
- The colour and finish to match
- The type of damage
A repair generally costs much less than people expect, particularly next to the cost of replacement. Send photos and we will give you the exact figure.
How to get a fixed quote
It only takes a minute to photograph the damage, and it saves a visit. Please include:
- Good light, ideally daylight, without flash glare
- Your postcode, so we can check dates
- Any earlier repairs or coatings
- A close-up of the damage, in focus
Ring 0345 017 0787, or send us photos through the quote form. With a clear picture of the damage and one of the entire bath, we can give you a fixed price.
What we do, step by step
Your technician turns up at the time we agreed with you, introduces themselves and looks over the damage before anything else. Dust sheets and masking tape go down before any work starts. The work itself takes most of the day, and we leave the room as we found it.
- First we protect the bathroom and set up ventilation.
- Next we degrease the bath and fix chips and rust spots.
- We key the surface and put on a bonding primer.
- We spray on the new enamel finish in several coats.
- Once cured, normally by the day after, the bath is ready.
Getting ready for the visit
- Have somewhere for us to park nearby if possible
- Clear toiletries, mats and anything else from around the area
- Tell us about any previous repairs or coatings
Getting a price
For a price in Driby, photos are the quickest way: a close-up, a wider shot and your postcode. You will get a fixed quote with dates to choose from.
Read more
How to look after the repair
Most damage we see is avoidable. These habits help:
- Stick to gentle, non-abrasive cleaners
- Store bottles off the bath
- Don’t use the bath until it has fully cured
- Fix dripping taps quickly
The first few days matter most: let it cure fully, then use mild cleaners only. After that, no abrasives and no suction mats.
The longer worn enamel is left, the rougher it gets, and rust spots spread under the surface. Resurfacing sooner means less repair work first.
DIY repairs versus a professional job
Kits are cheap and easy to find, but many of the jobs we do start with putting right a DIY repair. Getting it right first time is generally cheaper.
You can buy a DIY kit for most repairs, and they can make a small mark look better. The trouble is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler often lifts.
Places near Driby
What else we do in Driby
Materials and what they mean for the repair
Acrylic
Acrylic feels warm and is light, but it needs firm support underneath. Cracks are strengthened from behind before the front is finished.
Roll-top and period baths
Freestanding roll-tops can be done inside and out, with the outside refinished as well.
Driby questions
Can you fix a peeling bath coating?
Yes, we do this regularly. Stripping the old coating adds time, so it’s reflected in the quote.
What happens after I send pictures?
We review the photos and send a fixed quote.
What if the damage is worse than the photos show?
We stop, show you and agree any change before carrying on. You will not be charged for anything you haven’t agreed.
Can you repair something that’s been repaired before?
Generally, yes. Let us know what was used before.
Do I need to be at home?
Someone needs to let us in and show us the job. After that, you can carry on with your day.
Can you resurface a pink bath in white?
Yes. We can resurface a coloured bath in white, and we can do the rest of the suite as well.
Can you repair several things at once?
Yes. Combining jobs on one visit brings the cost down. Include pictures of each item.
Is there a smell?
Yes, while we’re applying the finish. We set up ventilation and the smell fades as it cures.
When a repair isn’t the answer
Some problems need a builder, plumber or fitter rather than us:
- Holes rusted through the metal
- A cast iron or steel bath that’s cracked right through
- Anything hidden under an old coating, until we remove it
Not sure? Send photos and we’ll give you a straight answer before you book.
Materials we repair
- Pressed steel baths
- Cast iron baths
- Victorian roll-tops
- Acrylic baths
- Basins & shower trays
Covering Driby
Driby is about 9 miles south-east of Louth, in Lincolnshire. Customers in Driby get the same service as everywhere else we cover: a fixed price from your pictures, and a technician at your door on the day. Driby is one of 732 towns and villages in Lincolnshire where we work. We work right across the region, from Driby to Leeds (about 78 miles away).
Every address in LN13 is covered, from the main roads to the quietest streets. We also cover the places around Driby: Swaby (2 miles north), Sausthorpe (4 miles south), Tetford (4 miles west), Hagworthingham (5 miles south-west) and Greetham (6 miles west). Larger places within reach include Louth (9 miles north-west), Skegness (12 miles south-east), Horncastle (9 miles west), Mablethorpe (9 miles north-east), Woodhall Spa (15 miles south-west) and Sutton on Sea (9 miles north-east).
Around Driby
Typical jobs here are in homes near Former Church of St Michael, among other places. Other landmarks nearby include Mawthorpe Bygones Museum (3.8 miles east) and Dalby Old Hall Holt (3.1 miles south). Open spaces near Driby include Miles Cross Hill.
Landlord and trade work in Driby
Builders, developers and site managers book us for snagging repairs, fixing chips and scratches before handover. We hold CHAS, Constructionline and SafeContractor accreditations.
We work for landlords, letting agents and housing providers in Driby as well as homeowners. A repair between tenants keeps the property empty for less time, and it typically costs far less than a refit.
Common problems we fix in Driby
Once enamel loses its gloss, it stains more easily, and cleaning harder only makes it worse. That’s the point where re-enamelling makes sense.
You may need us if you’ve spotted:
- Worn patches where water runs and sits
- Staining under the taps and around the waste
- An old resurfacing that’s failing
- A dull, rough surface that will not come clean
Before booking anyone
- How the colour is matched
- What prep work is covered
- How changes to the job are handled
- How the room is protected while they work
About our accreditations · Every repair comes with a one-year guarantee.
