Cheshire West and Chester · England

Bath Re-enamelling in Great Sutton

Bath re-enamelling across Great Sutton and nearby, normally in one visit.

  • Resurfacing from £350
  • Thin, worn enamel in places
  • A coloured bath you want in white
Surface Doctor technician refinishing the outside of a roll-top bath

Book bath re-enamelling in Great Sutton

How we handle bath re-enamelling in Great Sutton

Re-enamelling gives a worn bath a new glossy surface without a refit. It suits baths that are dull, stained, rough or chipped all over. Whether it’s a coloured bath you want in white and a bath that stays dull however much you clean it, we can typically put it right, on acrylic baths, cast iron baths and basins & shower trays alike.

A one-year guarantee comes with the work, just as it does everywhere we cover.

Location
Great Sutton (CH65, CH66, CH34)
Area hub
Cheshire West and Chester
Guarantee
12 months on all our work
Price
From £350. Fixed and free, based on photos
Telephone
0345 017 0787
Page updated
23 October 2026
Roll-top bath being refinished by a Surface Doctor technician

For landlords and businesses

We also carry out snagging repairs for builders and developers, fixing chips and scratches before handover. We’re CHAS, Constructionline and SafeContractor accredited.

We work for landlords, letting agents and housing providers in Great Sutton as well as householders. Repairing between tenancies keeps void periods short, and it costs much less than replacing.

Repair or replace in Great Sutton?

Replacing a bath typically involves a plumber, a fitter and a tiler. Re-enamelling takes one technician and generally one day, with the bath ready the day after. Our bath re-enamelling starts from £350. Our prices are the same across the UK, with no extra for Great Sutton. The job itself decides the price: how much damage, what it’s made of and how many items.

Why book with us

  • No need to remove anything
  • CHAS, Constructionline and SafeContractor accredited
  • One-year guarantee on every repair
  • Work done at your home or business

Read our pricing or resurfacing vs replacement cost guide.

What we do, step by step

Arrival times are agreed in advance, so you know when to expect us. Once we’re there, the work takes the best part of a day in most cases. We leave the room clean.

  1. First we look the bath over and confirm the finish.
  2. Taps, tiles and the floor are masked off.
  3. We degrease the bath, fix any damage and key the surface.
  4. Primer and finish coats are applied.
  5. The masking comes off, we tidy up and tell you when it can be used.

Getting ready for the visit

  • Have somewhere for us to park nearby if possible
  • Keep children and pets away from the room on the day
  • Let the surface dry out before the visit

Ask for a price

No survey visit is needed: we price from pictures. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through, and we will come back with a fixed figure.

Send photos for a quote

Read more

What bath re-enamelling costs

Resurfacing from £350. We give every job a fixed quote from photos. This is what makes a difference:

  • What kind of damage it is
  • What the surface is made of
  • How many items we do on one visit
  • How hard the colour is to match

We don’t add extras on the day. The price we quote from your photos is the price you pay, and if the damage turns out to be different, we discuss it before starting.

Send pictures for a quote

It only takes a minute to photograph the damage, and it saves a visit. Try to send:

  • A coin beside the damage so we can judge size
  • Any details about the material
  • One sharp close-up of the damage
  • A photo taken from further back

For most jobs, pictures are all we need to give you a price. Tell us what happened and where you are, and we’ll send back a fixed quote and some dates.

What a repair can’t fix

Some problems need a builder, plumber or fitter rather than us:

  • Holes rusted through the metal
  • A poorly supported acrylic bath, until it’s firmed up
  • Problems we can’t see until an old finish comes off

Not sure? Send pictures and we will give you a straight answer.

What we work on

  • Victorian roll-tops
  • Pressed steel baths
  • Basins & shower trays
  • Cast iron baths
  • Acrylic baths

Where we work around Great Sutton

Great Sutton is about 1 mile north of Ellesmere Port, in Cheshire West and Chester. From the centre of Great Sutton to the outlying streets, the service is the same: fixed prices, tidy work and a one-year guarantee. We cover all 224 towns and villages in Cheshire West and Chester, from the larger towns to small villages. Our jobs stretch from Great Sutton to Liverpool (9 miles away).

We cover every part of CH65, CH66 and CH34. We regularly work on streets such as Mill Lane, Luton Road and Bruera Road. We also cover the places around Great Sutton: Ellesmere Port (1 mile south), Whitby (1 mile south-east), Overpool (1 mile north), Little Sutton (1 mile north-west) and Hope Farm (1 mile south). Further out, we also cover Chester (6 miles south), Neston (6 miles west), Boughton (7 miles south), Frodsham (8 miles east), Hoole (6 miles south-east) and Newtown (6 miles south).

Near you in Great Sutton

We visit homes around St. Thomas, Whitby Park and The Acorns Primary and Nursery School and the streets around them. Nearby too are Ellesmere Port Specialist School of Performing Arts (under half a mile north-west) and White Swan pub (0.7 miles west). There’s a railway station in Great Sutton itself: Overpool station. Other landmarks nearby include Cheshire Oaks Designer Outlet (1.8 miles south-east) and Municipal Borough of Ellesmere Port (0.9 miles east). Open spaces near Great Sutton include Gowy Meadows Nature Reserve.

Map of Great Sutton © OpenStreetMap contributors

Questions from Great Sutton

Will the price change on the day?

If we find something the photos didn’t show, we explain it first. The price only changes if you agree.

Can I add another job to the visit?

Yes. Doing several items on one visit generally costs less than separate visits. Include photos of each item.

Do I need to be at home?

We need someone to let us in. You don’t need to watch us work.

Do you hold any accreditations?

We’re accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.

Do you come to Great Sutton?

Yes. We work across the UK and come to Great Sutton. Send us photos for a fixed quote, or call 0345 017 0787.

Can you price it without visiting?

Yes, almost always. Clear pictures let us give you a fixed quote without visiting.

Will you leave a mess?

Dust sheets and masking go down before we start, and tidy up before we leave.

Are there extra charges for Great Sutton?

There’s no separate call-out charge. The fixed price covers the visit and the work.

Do you need bath re-enamelling in Great Sutton?

Enamel wears gradually. Abrasive cleaners, limescale and years of use wear the gloss away, starting where water runs and sits.

Get in touch if you’ve noticed any of these:

  • Thin, worn enamel in places
  • A coloured bath you want in white
  • Brown or grey marks that do not clean off
  • An old resurfacing that is failing

Questions to ask before booking

  • A fixed quote, and whether VAT is included
  • If travel is included in the price
  • How the room is protected while they work
  • Aftercare advice

How to compare quotes

Aftercare tips

A little care keeps the finish looking good. Our advice:

  • Fix dripping taps quickly
  • Respect the curing time we give you
  • Do not leave a chip unrepaired
  • Don’t leave bottles, razors or sponges standing on the surface

Stick to mild, non-abrasive cleaners, don’t use suction bath mats, and do not leave bottles or razors standing on the surface.

Leave a peeling coating alone. Moisture gets underneath and makes it worse, so it’s better to have it stripped and redone.

DIY repairs versus a professional job

You can buy a DIY kit for most repairs, and they can make a small mark look better. The trouble is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler frequently lifts.

It’s tempting to reach for a kit, but the repairs we redo most often are DIY ones that have discoloured or lifted. Getting it right first time is typically cheaper.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.