Greater London · England
Bath Re-enamelling in Elm Park
We travel to Elm Park for full bath re-enamelling and resurfacing. Everything is done in place, and the work is guaranteed.
- Resurfacing from £350
- A bath that stays dull however much you clean it
- Stains that will not shift
Bath re-enamelling in Elm Park without replacing anything
We re-enamel a lot of period and roll-top baths, which are heavy, hard to move and costly to replace. Resurfacing them in place keeps the original bath. Our technicians work on Victorian roll-tops, basins & shower trays and acrylic baths, and common reasons people get in touch are a peeling or bubbling previous coating and thin, worn enamel in places.
Whatever the size of the job, you get the same one-year guarantee in Elm Park and across Greater London.
- Location
- Elm Park (RM12, RM13)
- County
- Greater London
- Guarantee
- A year, on every repair
- Quote
- From £350. Fixed and free, based on photos
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
Repairing versus replacing in Elm Park
A refit takes several trades and several days. Resurfacing is one technician, normally in a day, and the bath can be used the day after. Prices start from £350. No two jobs are quite the same, so each one is priced on its own. The size and type of damage, the material and access all make a difference, and combining jobs on one visit brings the cost down.
Why book with us
- Work done at your home or business
- Free fixed quotes from pictures
- Accredited with CHAS, Constructionline and SafeContractor
- We’ll tell you if it’s not worth repairing
Read our prices page or resurfacing vs replacement cost guide.
How it works
Once we are through the door, we keep the work contained to the one room. We mask off everything nearby, the job takes a full day, and we finish with a tidy-up and a look at the finished work together.
- First we protect the bathroom and set up ventilation.
- The bath is cleaned, degreased and any chips or rust repaired.
- The surface is prepared and a bonding primer applied.
- We spray several coats of new enamel finish.
- The bath is left to cure and can typically be used the following day.
Before we arrive
- Let us know about parking or access
- Keep pets and children out of the room while we work
- Make sure the area is dry
Getting a price
No survey visit is needed: we price from pictures. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through, and you’ll get a fixed figure back.
Read more
Our work in Elm Park
Elm Park is about 2 miles south of Romford, in Greater London. Whether you are in the middle of Elm Park or on the outskirts, we offer exactly the same service: a fixed price, a tidy visit and a guarantee. Elm Park is one of 764 towns and villages in Greater London we cover. Our jobs stretch from Elm Park to London (13 miles away).
Our technicians cover all of the RM12 and RM13 postcode area and the streets around it. Whether you live on Park Lane, Wood Lane and Carfax Road or a nearby road, we can come to you. Neighbouring places we cover include South Hornchurch (1 mile south-west), Rush Green (2 miles north-west), Dagenham (2 miles west), Romford (2 miles north) and Rainham (2 miles south). Within a short drive, we also cover London (13 miles west), City of Westminster (15 miles west), Marylebone (15 miles west), St Pancras (14 miles west), Shoreditch (12 miles west) and Walthamstow (10 miles west).
What’s near Elm Park
Locally, our jobs take us to homes close to Harrow Lodge Park, St Nicholas Church and Elm Park Primary School and the streets around them. For rail, the closest station is Emerson Park station, about 1.7 miles north-east. A little further out are St George's Hospital (0.9 miles east) and Hornchurch Urban District (1.5 miles north-east). Open spaces near Elm Park include The Chase Nature Reserve.
For landlords and businesses
We regularly work with letting and managing agents. Just send pictures, the address and how to get access and we’ll handle the rest.
Rented homes see more wear and tear, and replacing items every time a tenant leaves is expensive. A repair between tenancies is a cheaper way to keep the property in good order.
Materials and what they mean for the repair
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. The enamel is the part that wears or chips, and that is what we repair.
Pressed steel
Steel baths re-enamel well, as long as any rust is dealt with first. Rust around the waste is common on steel, so we check it carefully.
How we price bath re-enamelling
Resurfacing from £350. There’s no charge for travel to Elm Park. The price depends on:
- Access to the area
- Doing more than one item at once
- Unusual colours or finishes
- What kind of damage it is
A repair is priced on what needs doing, not your postcode. The full price is agreed before you book, with no extras added later.
Getting a price from pictures
Before you send photos, these tips help us give you a firm price:
- What it’s made of, if you know
- Something in shot to show the size
- Any earlier repairs or coatings
- Good light, ideally daylight, without flash glare
Send us a photo of the damage and a wider shot of the whole item, and tell us you are in Elm Park, and we’ll come back with a fixed quote.
Nearby places to Elm Park
What else we do in Elm Park
DIY repairs versus a professional job
If you’re set on a kit, follow its instructions closely, ensure the area is clean and completely dry, and do not use it until it has fully cured. If it fails, we can still put it right.
DIY kits are sold for most surfaces, and they can tidy up a tiny mark. The trouble is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler often lifts.
Elm Park questions
How soon can you come?
Your quote comes with available dates. Tell us if you need it done quickly.
What do you need from me?
A close-up, a wider photo and your postcode. Then we’ll agree a date.
Can you price it without visiting?
Nearly always. We only ask to see it in person if the photos cannot show what we need.
Can pets and children be at home?
On the day, the room should be kept clear of pets and children.
Can you make a coloured bath white?
Yes, white is the usual choice. Mention the colour you want when you send photos.
It’s been repaired before. Can you still fix it?
Generally, yes. Let us know what was used before and we will plan for it.
What does bath re-enamelling cost?
Prices start from £350. The exact price depends on the damage, so we quote from photos. You know the full cost before anything is booked.
How long does re-enamelling take?
Typically one day, with the bath ready the day after. A badly pitted bath can need a second day.
Do you need bath re-enamelling in Elm Park?
Sometimes it’s an earlier resurfacing that has failed, peeling around the waste or bubbling. We strip what’s failing and start again.
Typical reasons for a call-out include:
- A period or roll-top bath worth keeping
- Enamel that is lost its shine and feels rough
- Brown or grey marks that don’t clean off
- Several chips and rust patches
Questions to ask before booking
- Who turns up on the day
- Whether the price is fixed and includes VAT
- What prep work is covered
- The length of the guarantee and what it covers
When we’d advise against a repair
Not everything can be repaired, and we would rather say so up front. We can’t fix:
- An acrylic bath that flexes badly underfoot
- Damage hidden under a previous coating, until it’s stripped back
- Leaking taps or wastes (a plumber’s job)
If in doubt, send photos and we’ll say what we think.
What we work on
- Victorian roll-tops
- Cast iron baths
- Acrylic baths
- Basins & shower trays
- Pressed steel baths
About our accreditations · Every repair comes with a one-year guarantee.
