Shropshire · England

Bath Re-enamelling in Emstrey

Full bath re-enamelling and resurfacing for homeowners, landlords and businesses in Emstrey. Free, fixed quotes from your photos.

  • Resurfacing from £350
  • A coloured bath you want in white
  • Chips and rust in more than one place
Surface Doctor technician refinishing the outside of a roll-top bath

Bath re-enamelling in Emstrey

Landlord and trade work in Emstrey

We regularly price jobs from inventory or check-out pictures. That means we can quote before you even visit the property, and we can arrange access with the tenant directly if that helps.

Rented homes see more wear and tear, and replacing things at every changeover adds up. A repair between tenancies is a cheaper way to keep the property in good order.

About our bath re-enamelling in Emstrey

If your bath is sound but looks tired, resurfacing is normally the best value. It avoids removal, plumbing and re-tiling. We work on basins & shower trays, cast iron baths and pressed steel baths, and common reasons people contact us are enamel that’s lost its shine and feels rough and stains that won’t shift.

You are covered after we leave: each job carries a one-year guarantee, and we explain what it covers before booking.

Where
Emstrey (SY5)
Region
Shropshire
Warranty
A year, on every repair
Quotes
From £350. Fixed and free, based on photos
Phone
0345 017 0787
Page updated
23 October 2026
Roll-top bath being refinished by a Surface Doctor technician

Prices and what affects them

Prices start from £350. Quotes are free and the price is fixed. What we take into account:

  • The type of damage
  • The material
  • Access to the area
  • How hard the colour is to match

The price reflects the work involved, not your postcode. You will see the full price before you book, with no extras added later.

How to get a fixed price

Before you send pictures, a few simple things make all the difference:

  • One picture of the whole bath
  • A coin or ruler next to the damage for scale
  • Any details about the material
  • Whether it’s been repaired or coated before

For a price in Emstrey, the easiest route is photos: a close-up, a wider shot and your postcode. We reply with a fixed quote and our next available dates.

Emstrey and nearby

Emstrey is about 2 miles south-east of Shrewsbury, in Shropshire. Customers in Emstrey get the same service as everywhere else we cover: a fixed quote from photos, then a visit to do the work. We cover 433 places in Shropshire, from the larger towns to small villages. Our nearest city page is Birmingham, about 37 miles away.

All of SY5 is covered. Close by, we cover Sutton (1 mile west), Meole Brace (2 miles west), Pulley (3 miles west), Bayston Hill (3 miles west) and Radbrook Green (3 miles west). Larger places within reach include Madeley (11 miles east), Shifnal (14 miles east), Bagley (3 miles north-west), Coton Hill (3 miles north-west), Frankwell (3 miles north-west) and Wem (12 miles north).

Landmarks near Emstrey

Typical jobs here are in homes near Church of St Margaret, Prestfelde School and Mereside Church of England Primary School, among other places. The closest station to Emstrey is Shrewsbury station, about 2.4 miles north-west of the centre. Nearby you will also find Beeches Hospital (3 miles west) and Darwin Shopping Centre (2.5 miles north-west). Open spaces near Emstrey include Bomere Pool and Haughmond Hill.

Map of Emstrey © OpenStreetMap contributors

Honest limits

Some problems need a builder, plumber or fitter rather than us:

  • Acrylic that moves when you stand in it
  • Steel that has corroded right through
  • A metal bath with a through crack

Not sure? Send photos and we will give you a straight answer.

Materials we work on in Emstrey

  • Victorian roll-tops
  • Acrylic baths
  • Pressed steel baths
  • Basins & shower trays
  • Cast iron baths

Repairs by material

Pressed steel

Under the enamel of a steel bath is thin metal. Once a chip exposes it, rust follows quickly, so the metal is treated and sealed before the repair.

Cast iron

Cast iron baths are so heavy that repairing in place makes obvious sense. The enamel is the part that wears or chips, and that is the part we put right.

Can I fix it myself?

If you do try a kit, read the instructions carefully, and don’t use it until it has fully cured. If it fails, we can still put it right.

It’s natural to want to try a repair yourself. The risk is that a kit repair hides the damage for a while, then fails, and then the old filler has to be removed first.

How the visit works

Once we are through the door, the aim is to do the job without disturbing the rest of your home. Surfaces nearby are masked off, the job takes most of the day, depending on what we find, and we finish with a tidy-up and a look at the finished work together.

  1. We mask and protect the room and ventilate it.
  2. The bath is cleaned, degreased and any chips or rust repaired.
  3. We key the surface and put on a bonding primer.
  4. We spray several coats of new enamel finish.
  5. We leave it to cure, and it’s typically ready the next day.

How to prepare

  • Plan for the room to be out of bounds to pets and children
  • Make sure the area is dry
  • Let us know which floor the room is on

How to get a price

For most jobs, photos are all we need to give you a price. Add a line about what happened and your postcode, and we will send back a fixed quote and some dates.

Get a free quote

Read more

How to care for the repair

Good habits make a big difference to how long a repair lasts:

  • Keep suction mats out of the bath
  • Fix dripping taps quickly
  • Leave the bath for the full curing time before using it
  • Get any chip repaired quickly

Use mild, non-abrasive cleaners, do not use suction bath mats, and keep bottles and razors off the surface.

On a worn bath, rust spots keep spreading, and each one adds to the preparation. It’s simpler to resurface before they spread.

Common problems we fix in Emstrey

In hard water areas, limescale and the cleaning it needs wear enamel faster, and abrasive cleaners do the most damage.

Keep an eye out for any of the following:

  • A coating lifting around the plughole
  • Worn patches where water runs and sits
  • Chips and rust in more than one place
  • A roll-top that’s seen better days

Before booking anyone

  • How changes to the job are handled
  • How long it needs to cure
  • Whether the price covers travel
  • Whether the colour is mixed to match

How to compare quotes

Emstrey questions

I rent my home. Can I book you?

Yes. Check with your landlord; we can send the quote to them too.

Will the bath be moved?

No. We resurface it in place, so nothing else is disturbed.

Can pets and children be at home?

Please keep children and pets out of the room during the visit. Everywhere else in the home is fine.

How quickly can you book me in?

We’ll give you dates with your quote. If it’s urgent, say so and we will do what we can.

What happens after I send photos?

We come back with a fixed quote, plus dates. You’re under no obligation.

Will you leave a mess?

Very little mess: we sheet and mask everything nearby, and we leave the room clean.

Do you work for landlords and businesses?

Yes. We carry out repairs for homeowners, landlords, letting agents, builders and businesses in Emstrey.

Do you cover Emstrey?

Yes. We work across the UK and travel to Emstrey and the rest of Shropshire. Send us pictures for a fixed quote, or call 0345 017 0787.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.