Somerset · England
Bath re-enamelling & resurfacing in Torre, Somerset
Bath re-enamelling in Torre without the cost of replacing. Send us pictures for a fixed price, then we come to you.
- Resurfacing from £350
- A roll-top that’s seen better days
- Stains that will not shift
Materials and what they mean for the repair
Cast iron
Cast iron baths are the classic candidate for re-enamelling. They’re built to last, and only the surface wears, so resurfacing gives them a new life.
Pressed steel
Pressed steel baths take a new finish well, as long as any rust is dealt with first. Rust around the waste is common on steel, so we check it carefully.
Bath re-enamelling in Torre without replacing anything
If your bath is sound but looks tired, re-enamelling is typically the most cost-effective option. There is no removal, plumbing or tiling involved. If you’re dealing with lots of chips and rust spots and a coating lifting around the plughole, we can generally put it right, whatever the material.
Whatever the size of the job, it’s backed by a one-year guarantee.
- Location
- Torre (TA23)
- County
- Somerset
- Guarantee
- One year on every repair
- Quotes
- From £350. Free and fixed, from your photos
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
Nearby places to Torre
What else we do in Torre
Signs you need bath re-enamelling in Torre
Frequently the bath has just had decades of use, with nothing wrong except the surface. The body of the bath is usually perfectly sound.
Clients typically contact us about:
- Stains that will not shift
- A bath that stays dull however much you clean it
- Thin, worn enamel in places
- A coating lifting around the plughole
Before you book anyone
- What the guarantee covers, and for how long
- If travel is included in the price
- Whether the colour is mixed to match
- Whether cleaning and preparation are in the price
How the visit works
Visits start with a quick look at the job together. Then the area is sheeted and masked and the work begins. Allow most of the day, and we’ll keep you posted as we go.
- We sheet, mask and ventilate the room.
- We remove the old silicone and deep clean the bath.
- We repair chips, rust spots and pitting.
- We key the bath and apply a bonding primer.
- The new finish is sprayed on in several coats and left to cure.
Preparing for the visit
- Avoid using the area for a few hours before we arrive
- Keep a parking space free if you can
- Plan for the room to be out of bounds to pets and children
Getting a price
We price from photos so you do not have to wait in for a survey. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through, and you’ll get a fixed figure back.
Related advice
What we cannot put right
Not everything can be repaired, and we’ll tell you before we start. Repairs won’t solve:
- Steel that has corroded right through
- A poorly supported acrylic bath, until it’s firmed up
- Anything hidden under an old coating, until we remove it
If in doubt, send photos and we will say what we think.
Materials we repair
- Pressed steel baths
- Basins & shower trays
- Victorian roll-tops
- Acrylic baths
- Cast iron baths
Why repair rather than replace?
Getting a cast iron bath out is hard work: they’re heavy, frequently need breaking up, and a new one is not cheap. Re-enamelling avoids all of it. Prices start from £350. We do not add extras on the day. What we quote from your photos is what you pay, unless the damage turns out to be different, in which case we talk to you first.
Why us?
- Colours mixed by hand to suit your surface
- We come to you, anywhere in the UK
- Same prices wherever you are
- A fixed quote before booking
Read our prices page and bath cost comparison.
Can I fix it myself?
If you do try a kit, read the instructions carefully, make sure the area is clean and completely dry, and do not use it until it has fully cured. If it does not work out, we can still repair it properly.
We understand the appeal of fixing it yourself. The risk is that a kit repair hides the damage for a while, then fails, and the old filler has to come out before a proper repair.
Looking after it afterwards
It’s all simple stuff:
- Use washing-up liquid and a soft cloth
- Respect the curing time we give you
- Avoid suction-cup mats
- Fix dripping taps quickly
Give the finish its full curing time before using the bath. After that, a soft cloth and washing-up liquid is all it needs.
Leave a peeling coating alone. Water gets under it and the damage spreads, so have it stripped and resurfaced.
Torre and nearby
Torre is about 6 miles south-east of Minehead, in Somerset. Jobs in Torre are booked in like any other job: a fixed quote from photos, then a visit to do the work. Our technicians cover 640 places across Somerset, from the larger towns to small villages.
Here we cover the TA23 postcode area. Close by, we cover Washford (1 mile north), Roadwater (1 mile south-west), Bilbrook (1 mile north-west), Old Cleeve (1 mile north) and Nettlecombe (2 miles south-east). Further out, we also cover Taunton (15 miles south-east), Minehead (6 miles north-west), Wellington (13 miles south-east), Wilton (15 miles south-east), Comeytrowe (14 miles south-east) and Monkton Heathfield (15 miles south-east).
Landmarks near Torre
Our clients here include homes close to St Mary's Church, Old Cleeve CofE School and The White Horse Inn and the streets around them. Well-known places in the area include Somerset And Dorset Railway Trust Museum (0.7 miles north) and Dunster Castle (4 miles north-west). Not far away are Castle Hill.
Your questions about bath re-enamelling in Torre
Can I add another job to the visit?
Yes, and it’s often cheaper. Send pictures of everything together and we will quote them together.
How do I get a price for bath re-enamelling in Torre?
Resurfacing from £350. The exact price depends on the damage, so we quote from pictures. You’ll get a fixed figure before booking.
Can tenants book a repair?
We are happy to deal with the tenant, landlord or agent. Get your landlord’s agreement first.
Are there extra charges for Torre?
There’s no separate call-out charge. Your fixed price includes everything.
Do you cover the entire of Somerset?
Across the UK. Our prices are the same everywhere.
Do you hold any accreditations?
We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.
Can you make a coloured bath white?
Yes. Coloured baths can be resurfaced in white, and the basin and toilet can be done too.
Can a failed resurfacing be redone?
Yes, we do this regularly. Removing the old finish takes extra time, which we include in the price.
For landlords and businesses
Hotels, guest houses and holiday lets cannot afford rooms out of action for long, so we keep visits short and tidy. We can work around your bookings.
Letting agents often send us pictures straight from the inventory. You can have a price before you arrange access, and we liaise with tenants about access if you’d like us to.
About our accreditations · Every repair comes with a one-year guarantee.
