Kent · England
Bath Re-enamelling in Eythorne
Full bath re-enamelling and resurfacing for homeowners, landlords and businesses in Eythorne. Send pictures for a free, fixed quote.
- Resurfacing from £350
- A bath that stays dull however much you clean it
- A bath in a colour that no longer suits
Bath re-enamelling in Eythorne without replacing anything
After cleaning, repairing and priming, we spray on the new finish. Most of the work, and most of the durability, is in the preparation, and we take our time over it. Typical jobs include several chips and rust patches and a period or roll-top bath worth keeping, in pressed steel baths, cast iron baths and acrylic baths.
All our work comes with our one-year guarantee.
- Where
- Eythorne (CT15)
- Area hub
- Kent
- Guarantee
- One year on every repair
- Quotes
- From £350. Free and fixed, from your photos
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
DIY kit or professional repair?
It’s natural to want to try a repair yourself. The trouble is that kit repairs often look fine at first and then fail, and the old filler has to come out before a proper repair.
What a professional repair adds is preparation, colour matching and finishing. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, then guarantee it for a year.
Eythorne questions
Will there be a smell?
A little, depending on the job. Ventilation keeps it to a minimum, and it soon fades.
Can pets and children be at home?
Please keep children and pets out of the room during the visit and until it has cured. Everywhere else in the home is fine.
What information do you need?
Some photos, your postcode and how to reach you. On the day, access to the room.
Will the new finish last?
A well-prepared finish lasts a long time if it’s looked after. Avoid abrasive cleaners and suction mats.
Can I add another job to the visit?
Yes. Doing several items on one visit normally costs less than separate visits. Include photos of each item.
Is my repair covered?
All our work carries a one-year guarantee. We will explain what it covers when we quote.
Is there a call-out fee?
No. Our quotes include travel, with the same prices everywhere we work.
Is it messy?
Dust sheets and masking go down before we start, and tidy up before we leave.
What we do, step by step
We work cleanly and quietly, so you can carry on at home. Protection goes down first, then the job itself takes most of the day. Before we leave, we explain the curing time and the aftercare.
- We mask and protect the room and ventilate it.
- The bath is cleaned, degreased and any chips or rust repaired.
- We prepare the surface and apply a bonding primer.
- We spray several coats of new enamel finish.
- The bath is left to cure and can normally be used the following day.
Getting ready for the visit
- Mention any earlier repairs or resurfacing
- Make sure the area is dry
- Tell us if there are stairs or a lift
Ask for a price
The quickest way to a price is to send a couple of pictures using our quote form or ring us. We’ll tell you honestly whether it can be repaired.
Read more
What your bath is made of matters
Acrylic
Acrylic baths can be resurfaced too, with a coating system suited to acrylic. The bath needs to be firm and well supported.
Pressed steel
Pressed steel baths take a new finish well, as long as any rust is dealt with first. Steel often rusts by the plughole, so we check it carefully.
Places near Eythorne
What else we do in Eythorne
What affects the price in Eythorne
Resurfacing from £350. There are no hourly rates or hidden extras. The price is based on:
- The material
- What kind of damage it is
- Whether we combine several jobs
- Where the damage is and how we get to it
The price reflects the work involved, not your postcode. The full price is agreed before booking, with no extras added later.
Send photos for a quote
Before you send photos, these tips help us give you a firm price:
- One sharp close-up of the damage
- The postcode, so we can plan the visit
- Any details about the material
- Something in shot to show the size
Getting a price is easy: snap the damage close up and then the whole item, send them to us with your postcode, and you will get a fixed quote back. There’s no charge for the quote and no obligation.
When to call us in Eythorne
Hard water speeds up the wear, and gritty cleaners are the worst culprits.
Look out for any of the following:
- Enamel that is lost its shine and feels rough
- Chips and rust in more than one place
- An old resurfacing that’s failing
- A period or roll-top bath worth keeping
What to look for in a quote
- How the room is protected while they work
- What the guarantee covers, and for how long
- Who turns up on the day
- Whether they match the colour on site
How to care for the repair
Most damage we see is avoidable. A few tips:
- Use washing-up liquid and a soft cloth
- Rinse off hair dye, oils and bath bombs immediately
- Do not leave a chip unrepaired
- Respect the curing time we give you
Treat the new finish gently at first: let it cure fully, then use mild cleaners only. From then on, avoid abrasives and suction mats.
Worn enamel only gets rougher with time, and rust spots spread under the surface. Resurfacing sooner means less repair work first.
Landlord and trade work in Eythorne
Builders, developers and site managers book us for snagging repairs, fixing chips and scratches before handover. We hold CHAS, Constructionline and SafeContractor accreditations.
We are used to working with agents and managing companies. Send the address, pictures and access details and we will arrange it.
Honest limits
Some jobs are not right for a repair, for example:
- Anything hidden under an old coating, until we remove it
- An acrylic bath that flexes badly underfoot
- Holes rusted through the metal
Not sure? Send pictures and we’ll give you a straight answer before you book.
What we work on
- Victorian roll-tops
- Cast iron baths
- Pressed steel baths
- Acrylic baths
- Basins & shower trays
Eythorne and the surrounding area
Eythorne is about 4 miles north of Dover, in Kent. Clients in Eythorne get the same service as everywhere else we cover: a fixed quote from your pictures, then a visit to do the work. Our repair technicians cover 922 places across Kent, from the larger towns to small villages. You can also see our page for London, about 62 miles away.
Postcode districts we cover here: CT15. That includes homes on The Street, Sandwich Road and New Road and the roads around them. Other places close to Eythorne include Waldershare (1 mile south-west), Sibertswold (2 miles south-west), Coldred (2 miles south-west), Halfway Street (2 miles south-west) and Lydden (3 miles south-west). Larger places within reach include Canterbury (10 miles north-west), Margate (14 miles north), Dover (4 miles south), Folkestone (9 miles south-west), Ramsgate (11 miles north-east) and Broadstairs (13 miles north-east).
Near you in Eythorne
Typical jobs here are in homes near Eythorne Elvington Community Primary School, The White Horse pub and Church of St Peter and St Paul and the streets around them. The closest station to Eythorne is Shepherds Well station, roughly 1.8 miles west. Further afield, we also cover the area around Dover Transport Museum (3.5 miles south) and Buckland Hospital (4.7 miles south).
About our accreditations · Every repair comes with a one-year guarantee.
