Kent · England
Bath Re-enamelling for Halfway Street homes
Full bath re-enamelling and resurfacing in Halfway Street, carried out at your home and guaranteed for a year.
- Resurfacing from £350
- A bath that stays dull however much you clean it
- A peeling or bubbling previous coating
How to look after the repair
After the repair has cured, a few habits help it last:
- Use washing-up liquid and a soft cloth
- Do not let dyes or oils sit on the finish
- Never use suction bath mats
- Dry the bath after use to stop limescale
The first few days matter most: give it the full curing time, then clean it gently. After that, no abrasives and no suction mats.
Worn enamel only gets rougher with time, and rust spots spread under the surface. Resurfacing sooner means less repair work first.
Bath re-enamelling at your home in Halfway Street
Re-enamelling works especially well on cast iron and steel, and acrylic baths can be resurfaced too. The result is a smooth, even, glossy finish. If you are dealing with several chips and rust patches and brown or grey marks that don’t clean off, we can usually put it right, whatever the material.
The work is covered for a year after we finish. If anything is not right, ring us and we’ll come back.
- Location
- Halfway Street (CT15)
- Area hub
- Kent
- Cover
- 12 months on all our work
- Quotes
- From £350. Free and fixed, from your pictures
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
The process
Here’s how a visit normally runs: we arrive on time, protect everything around the work area, do the job and tidy away. Plan for a full day from start to finish. Before leaving, we tell you how long to leave it and what to avoid for the first few days.
- First we look the bath over and confirm the finish.
- Everything around the bath is masked and covered.
- We degrease the bath, fix any damage and key the surface.
- Primer and finish coats are applied.
- The masking comes off, we tidy up and tell you when it can be used.
Getting ready for the visit
- Let the surface dry out before the visit
- Have a window or extractor fan available
- Mention any parking restrictions or tricky access
Get a quote
For a price in Halfway Street, pictures are the quickest way: one close up, one from further back, plus your postcode. We reply with a fixed quote and our next available dates.
Read more
Your questions about bath re-enamelling in Halfway Street
Will there be a smell?
There may be a mild smell during the work.
Can you change the colour of my bath?
Yes. We can resurface a coloured bath in white, and the basin and toilet can be done too.
Do you cover the whole of Kent?
All of Kent, and the rest of the UK. Travel is included in the price.
What information do you need?
Photos of the damage, a photo of the whole bath and your postcode. Then we will agree a date.
What happens once I’ve sent photos?
We review the pictures and send a fixed quote with dates.
Do I need to be at home?
Yes. We need access to the room while we work, at a time that suits you.
Can you repair something that is been repaired before?
Normally, yes. The old repair comes out first, so mention it when you send pictures.
Do you work for landlords and businesses?
Yes. We work for landlords, agents, builders and businesses as well as homeowners.
When to call us in Halfway Street
Hard water speeds up the wear, and gritty cleaners are the worst culprits.
Most people get in touch when they notice one of these:
- Stains that won’t shift
- A coloured bath you want in white
- A peeling or bubbling previous coating
- Enamel that is lost its shine and feels rough
Comparing quotes
- A fixed price, and whether VAT is included
- What the guarantee covers, and for how long
- How the room is protected while they work
- How to care for the finish
For landlords and businesses
We also carry out snagging repairs for builders and developers, fixing chips and scratches before handover so nothing needs replacing. We are CHAS, Constructionline and SafeContractor accredited.
Letting agents frequently send us photos straight from the inventory. That means we can quote before you even visit the property, and we liaise with tenants about access if you’d like us to.
What we cannot put right
In fairness, some problems need a different fix:
- A poorly supported acrylic bath, until it’s firmed up
- Plumbing leaks, which need a plumber
- Problems we cannot see until an old finish comes off
Send us photos and we will tell you honestly before booking.
Materials we work on in Halfway Street
- Cast iron baths
- Pressed steel baths
- Acrylic baths
- Victorian roll-tops
- Basins & shower trays
Materials and what they mean for the repair
Cast iron
Cast iron baths are the classic candidate for re-enamelling. They’re built to last, and only the surface wears, so resurfacing gives them a new life.
Pressed steel
Steel baths re-enamel well, as long as any rust is dealt with first. Rust around the waste is common on steel, so we check it carefully.
Covering Halfway Street
Halfway Street is about 4 miles north-west of Dover, in Kent. Book a date that suits you, and you will know when to expect us, so you’re not left waiting in all day. Halfway Street is one of 922 towns and villages in Kent where we work. We work right across the region, from Halfway Street to London (61 miles away).
We cover every part of CT15. If you’re just outside Halfway Street, we cover Sibertswold (1 mile north-east), Coldred (1 mile east), Lydden (1 mile south-east), Waldershare (2 miles east) and Eythorne (2 miles north-east). We also work in nearby towns such as Canterbury (9 miles north-west), Margate (15 miles north-east), Dover (4 miles south-east), Folkestone (7 miles south), Ramsgate (14 miles north-east) and Broadstairs (15 miles north-east).
Around Halfway Street
Locally, our jobs take us to homes close to The Bricklayers' Arms and Church of St Andrew, among other places. The nearest railway station is Shepherds Well station, about 0.6 miles north-east. Well-known places in the area include Buckland Hospital (4.5 miles south-east) and Dover Transport Museum (3.6 miles south-east).
How we price bath re-enamelling
Resurfacing from £350. We give every job a fixed quote from photos. This is what makes a difference:
- How hard the colour is to match
- Doing more than one item at once
- What the surface is made of
- Where the damage is and how we get to it
We don’t add extras on the day. The price we quote from your pictures is the price you pay, and if the damage turns out to be different, we discuss it before starting.
How to get a fixed quote
Almost every job we do is priced from pictures. This is what to send:
- Something in shot to show the size
- Your postcode, so we can check dates
- A close-up of the damage, in focus
- A photo taken from further back
The quickest way to a price is to send two or three photos through our quote form or call us. We’ll say immediately whether it can be repaired.
Towns and villages near Halfway Street
Other services in Halfway Street
Repair or replace: which is better?
A new bath means a plumber, removing a heavy bath, re-tiling or making good the walls and days without a bathroom. Re-enamelling renews the entire surface with the bath left where it is. Our bath re-enamelling starts from £350. It helps to know what pushes a price up or down: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Photos let us give you a fixed figure.
What you get with us
- Usually one visit, start to finish
- Colour-matched on site
- One price list for the entire UK
- Work done at your home or business
Read our prices page and bath cost comparison.
About our accreditations · Every repair comes with a one-year guarantee.
