Shropshire · England
Bath Re-enamelling for Fauls homes
Full bath re-enamelling and resurfacing for homeowners, landlords and businesses in Fauls. Free, fixed quotes from your photos.
- Resurfacing from £350
- Stains that won’t shift
- An outdated colour you’d like to change
How it works
You do not need to empty the room. Everything we use comes in the van with us, lay protective sheets and start once you are happy with the plan. It usually takes the best part of a day, and you are welcome to carry on with your day while we work.
- The bathroom is protected and ventilation set up.
- Old sealant is cut out and the bath is deep cleaned.
- Chips, rust and pitting are repaired.
- We key the bath and apply a bonding primer.
- Several coats of finish are sprayed on, then it cures until the next day.
Before we arrive
- Keep a parking space free if you can
- Clear the area around the damage
- Have a window or extractor fan available
Getting a price
For most jobs, pictures are all we need to give you a price. Add a line about what happened and your postcode, and we will send back a fixed quote and some dates.
Advice
Bath re-enamelling in Fauls without replacing anything
Many of the baths we re-enamel are period roll-tops, which would be difficult and expensive to replace. Doing them in place keeps an original feature. We regularly repair cast iron baths, Victorian roll-tops and basins & shower trays, and people most often call us about an outdated colour you’d like to change and a roll-top that’s seen better days.
The work is covered for a year after we finish. Just call us if there’s a problem and we will come back.
- Location
- Fauls (SY13)
- Region
- Shropshire
- Warranty
- One year on every repair
- Quotes
- From £350. Free, fixed price from pictures
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
Fauls and the surrounding area
Fauls is about 5 miles west of Market Drayton, in Shropshire. Jobs in Fauls are booked in like any other job: a fixed quote from photos, and a technician at your door on the day. Fauls is one of 433 towns and villages in Shropshire we cover. Our nearest city page is Liverpool, about 38 miles away.
Every address in SY13 is covered. We also cover the places around Fauls: Darliston (1 mile north-west), Prees Wood (2 miles west), Prees Green (2 miles south-west), Prees (2 miles west) and Weston-under-Redcastle (3 miles south-west). Larger places within reach include Shrewsbury (14 miles south-west), Market Drayton (5 miles east), Coleham (14 miles south-west), Kingsland (14 miles south-west), Whitchurch (6 miles north-west) and Belle Vue (14 miles south-west).
What’s near Fauls
Our customers here include homes close to Lower Heath CofE Primary School and Church of Immanuel and the streets around them. For rail, the closest station is Prees station, about 3.3 miles west of the centre. Further afield, we also cover the area around Red Castle (2.4 miles south-west). The countryside around Fauls includes Prees Heath Common and Hawk Lake.
Fauls questions
What happens after I send photos?
We check the damage, the material and your postcode, then reply with a quote with dates.
Can I add another job to the visit?
Yes, and it’s often cheaper. Send pictures of everything together and you’ll get one combined price.
Is it messy?
No. The work area is masked and covered, and we leave the room clean.
Do I have to be there?
Yes. The technician needs access to the room for the visit, at a time we agree with you.
Will the price change on the day?
We stop, show you and agree any change before carrying on. You will not be charged for anything you haven’t agreed.
How durable is a resurfaced bath?
It depends on preparation, use and care. Properly prepared and looked after, it lasts well, and it’s guaranteed for a year.
Are you accredited?
We’re accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.
Can you redo someone else’s repair?
Yes, regularly. It can add a little time, which we include in the quote.
Aftercare tips
Good habits make a big difference to how long a repair lasts:
- Fix dripping taps quickly
- Use washing-up liquid and a soft cloth
- Avoid suction-cup mats
- Dry the bath after use to stop limescale
Give the finish its full curing time before using the bath. Then, gentle cleaning with a soft cloth is enough.
If a previous coating is starting to peel, do not pick at it. Moisture gets underneath and makes it worse, so it’s better to have it stripped and redone.
Nearby places to Fauls
Also in Fauls
Do you need bath re-enamelling in Fauls?
Enamel does not fail overnight. Abrasive cleaners, limescale and years of use wear the gloss away, starting where water runs and sits.
Keep an eye out for any of the following:
- A coating lifting around the plughole
- Several chips and rust patches
- Thin, worn enamel in places
- A dull, rough surface that will not come clean
What your quote should include
- What prep work is covered
- A fixed quote, and whether VAT is included
- What the guarantee covers, and for how long
- If travel is included in the price
Different materials, different repairs
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Exposed steel rusts quickly, so we treat and seal the metal before filling.
Roll-top and period baths
We can resurface a roll-top inside and out, and the outside can be refinished too.
Landlords, agents and businesses in Fauls
Rented homes see more wear and tear, and replacing items every time a tenant leaves is expensive. Repairing between tenants keeps the property presentable for less.
We’re used to working with agents and managing companies. Just send pictures, the address and how to get access and we’ll handle the rest.
Repair or replace in Fauls?
For a sound bath, resurfacing costs far less than replacement, once you add removal, plumbing, tiling and decorating to the price of a new bath. It’s also far quicker. Prices start from £350. We charge the same wherever you are, with no extra for Fauls. The job itself decides the price: how much damage, what it’s made of and how many items.
Why book with us
- Accredited with CHAS, Constructionline and SafeContractor
- Every repair guaranteed for a year
- Work done at your home or business
- Colour mixed on the day to match
See our full price list and bath cost comparison.
What we cannot put right
A repair isn’t always the answer, and we’ll tell you before we start. We cannot fix:
- Anything hidden under an old coating, until we remove it
- A bath that is rusted through
- Leaking taps or wastes (a plumber’s job)
Not sure? Send pictures and we will give you a straight answer.
What we work on
- Pressed steel baths
- Cast iron baths
- Basins & shower trays
- Acrylic baths
- Victorian roll-tops
Prices and what affects them
Prices start from £350. Every quote is fixed and free. What we look at:
- Whether it’s a chip, crack, burn or wear
- How many items we do on one visit
- The material and finish
- How much damage there is
Compared with replacing, a repair is typically a fraction of the price, because there is no removal, plumbing or making good. The quote lists exactly what you are paying for.
Quotes from your photos
Most quotes are done from photos alone. To help us price it:
- The material, if you know it
- Details of any past repairs
- One picture of the entire bath
- Your postcode, so we can check dates
A quote takes minutes to ask for: photograph the damage, then the whole bath, include your postcode and send them to us. You’ll get a fixed quote, not an estimate.
About our accreditations · Every repair comes with a one-year guarantee.
