Shropshire · England
Bath re-enamelling & resurfacing in Darliston, Shropshire
Bath re-enamelling in Darliston without the cost of replacing. Get a fixed quote from your photos, then book a visit.
- Resurfacing from £350
- Worn patches where water runs and sits
- Brown or grey marks that do not clean off
Bath re-enamelling at your home in Darliston
Cast iron, steel, acrylic, roll-top and period baths can all be resurfaced. Several coats of finish go on over a bonding primer, after the bath has been cleaned, repaired and keyed. Common call-outs are for an old resurfacing that’s failing and wear marks under the taps, in pressed steel baths, acrylic baths and Victorian roll-tops.
Your repair is guaranteed for a year, as with every job we do.
- Area
- Darliston (SY13)
- Region
- Shropshire
- Warranty
- 12 months on all our work
- Quotes
- From £350. Free, fixed quote from pictures
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
Common questions in Darliston
Can a failed resurfacing be redone?
Normally, yes. The old coating comes off before we resurface it. Mention it when you send photos.
Can you re-enamel a roll-top bath?
Yes. We can do the inside and outside.
Is there a smell?
Some odour is normal while we spray, which is why we ventilate the bathroom. It fades as the coating cures.
Are you a vetted contractor?
Yes. Our accreditations include CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.
Will you leave a mess?
We protect the room with dust sheets and masking first, and tidy up before we leave.
Can landlords book you?
Yes. We carry out repairs for householders, landlords, letting agents, builders and businesses in Darliston.
Will the bath be moved?
No, it stays where it is. Everything is done in your bathroom, with the room protected and ventilated.
Do you cover Darliston?
Yes. We cover the whole UK and come to Darliston. Send photos and we’ll quote, or call 0345 017 0787.
Do you need bath re-enamelling in Darliston?
Previous coatings can fail too, peeling around the waste or bubbling. We strip what’s failing and start again.
Send us a picture if you notice any of these:
- A bath in a colour that no longer suits
- Chips and rust in more than one place
- Worn patches where water runs and sits
- A coating lifting around the plughole
Comparing quotes
- A fixed price, and whether VAT is included
- The length of the guarantee and what it covers
- What preparation is included
- When it can be used again
Covering Darliston
Darliston is about 6 miles south-east of Whitchurch, in Shropshire. We travel to clients in Darliston and nearby villages, so nothing has to leave your home. Darliston is one of 433 towns and villages in Shropshire we cover. You can also see our page for Liverpool, about 37 miles away.
Here we cover the SY13 postcode area. Close by, we cover Fauls (1 mile south-east), Prees Wood (1 mile west), Prees Green (2 miles south-west), Prees (2 miles west) and Weston-under-Redcastle (3 miles south). Further out, we also cover Shrewsbury (14 miles south), Market Drayton (6 miles east), Coleham (14 miles south), Kingsland (14 miles south), Whitchurch (6 miles north-west) and Belle Vue (14 miles south).
Local landmarks in Darliston
Our customers here include homes close to Church of Immanuel and Lower Heath CofE Primary School and the streets around them. Darliston’s nearest station is Prees station, roughly 2.7 miles west of the centre. Further afield, we also cover the area around Whitchurch Community Hospital (5.7 miles north-west) and Red Castle (2.6 miles south). Open spaces near Darliston include Prees Heath Common and Hawk Lake.
How to look after the repair
Aftercare is simple:
- Repair dripping taps early
- Keep suction mats out of the bath
- Rinse off hair dye, oils and bath bombs straight away
- Leave the bath for the full curing time before using it
The first few days matter most: give it the full curing time, then clean it gently. After that, no abrasives and no suction mats.
Don’t try to scrub a worn bath back to shine. It just wears the enamel further.
Places near Darliston
Also in Darliston
Prices and what affects them
Resurfacing from £350. Prices are worked out job by job, from your photos. What matters most is:
- Previous DIY repairs that have to come out
- The type of damage
- The material
- Where the damage is and how we get to it
There are no surprise extras on the day. What we quote from your photos is what you pay, unless the damage turns out to be different, in which case we talk to you first.
Send pictures for a quote
Two or three clear photos are generally enough. Try to include:
- Any details about the material
- A wider photo showing the entire bath
- A coin or ruler next to the damage for scale
- Any earlier repairs or coatings
To get a price, send a couple of pictures through our quote form or ring us. We’ll say right away whether it can be repaired.
Repairing versus replacing in Darliston
Replacing a bath can take several days across several trades. Resurfacing takes one technician and normally a day. Prices start from £350. Set against the cost of replacement, repairing usually costs far less, because nothing has to be taken out, refitted or made good. The quote lists exactly what you’re paying for.
What you get with us
- Work done at your home or business
- Everything repaired in place
- Accredited with CHAS, Constructionline and SafeContractor
- A year’s guarantee on all work
Read our full price list and resurfacing vs replacement cost guide.
For landlords and businesses
Builders, developers and site managers book us for snagging repairs, putting right damage done during fitting so nothing needs replacing. We hold CHAS, Constructionline and SafeContractor accreditations.
We regularly price jobs from inventory or check-out pictures. You can have a price before you arrange access, and we can arrange access with the tenant directly if that helps.
Materials and what they mean for the repair
Roll-top and period baths
We can resurface a roll-top inside and out, with the outside refinished as well.
Acrylic
We resurface acrylic baths as well, using a system that bonds to acrylic. It must be solid and not flex underfoot for the finish to last.
What we do, step by step
You do not need to empty the room beforehand. We bring everything we need with us, put protection down and start once you’re happy with the plan. Most jobs take the best part of a day, and you can get on with other things while we are there.
- We sheet, mask and ventilate the room.
- We remove the old silicone and deep clean the bath.
- We repair chips, rust spots and pitting.
- We key the bath and apply a bonding primer.
- The new finish is sprayed on in several coats and left to cure until the following day.
Preparing for the visit
- Avoid using the area for a few hours before we arrive
- Mention if the room is upstairs or in a flat
- Clear toiletries, mats and anything else from around the area
How to get a price
Send us a picture of the damage and a wider shot of the entire item, and tell us you are in Darliston, and we’ll come back with a fixed quote.
Read more
What a repair can’t fix
We will not take on work that will not last, so here’s what a repair cannot put right:
- Leaking taps or wastes (a plumber’s job)
- Problems we cannot see until an old finish comes off
- A bath split right through the body
If in doubt, send pictures and we will say what we think.
Surfaces we repair
- Basins & shower trays
- Pressed steel baths
- Cast iron baths
- Victorian roll-tops
- Acrylic baths
About our accreditations · Every repair comes with a one-year guarantee.
