North Yorkshire · England
Bath re-enamelling & resurfacing in Fewston, North Yorkshire
Damaged bath in Fewston? We repair it in place, match it on site and back it with a one-year guarantee.
- Resurfacing from £350
- Several chips and rust patches
- An old resurfacing that’s failing

For landlords and businesses
Hospitality businesses need rooms back in use quickly, so we keep visits short and tidy. We will fit around changeovers where we can.
We carry out planned and one-off repairs for housing associations and facilities teams in North Yorkshire and across the UK. A repair avoids taking out and refitting, which is easier on the people living there.
Bath re-enamelling in Fewston without replacing anything
Re-enamelling gives a worn bath a new glossy surface without taking anything out. It’s the answer when the entire bath is tired rather than one spot. We work on basins & shower trays, cast iron baths and acrylic baths, and common reasons people get in touch are thin, worn enamel in places and stains that won’t shift.
Every repair comes with our one-year guarantee.

- Where
- Fewston (HG3)
- Region
- North Yorkshire
- Cover
- A year, on every repair
- Quotes
- From £350. Free, fixed price from pictures
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
Aftercare tips
Good habits make a big difference to how long a repair lasts. Here’s what we suggest:
- Do not let dyes or oils sit on the finish
- Never use suction bath mats
- A quick wipe after use keeps limescale away
- Get any chip repaired quickly
Treat the new finish gently at first: give it the full curing time, then clean it gently. From then on, avoid abrasives and suction mats.
Do not try to scrub a worn bath back to shine. It just wears the enamel further and makes resurfacing more work.
Our work in Fewston
Fewston is about 6 miles north of Otley, in North Yorkshire. We visit customers in Fewston and the surrounding area, so you don’t need to take anything anywhere. Fewston is one of 626 places in North Yorkshire we cover. Our jobs stretch from Fewston to Leeds (14 miles away).
Our repair technicians cover all of HG3. Nearby, we also work in Fewston Bents (1 mile north-east), Timble (1 mile south-west), Clifton (4 miles south), Askwith (4 miles south) and Denton (4 miles south-west). Within a short drive, we also cover Harrogate (7 miles east), Knaresborough (10 miles east), Skipton (12 miles west), Ripon (13 miles north-east), Starbeck (9 miles east) and Bilton (7 miles east).
Around Fewston
Our customers here include homes close to Church of St Lawrence, among other places. Well-known places in the area include Wharfedale Hospital (5 miles south) and John O'Gaunt's Castle (1.8 miles east).
The process
On the day, the technician arrives at the agreed time, protects the room with dust sheets and masking and gets started. Expect it to take most of the day. We tidy up before we leave and let you know when you can use it again.
- We sheet, mask and ventilate the room.
- Old sealant is cut out and the bath is deep cleaned.
- Chips, rust and pitting are repaired.
- The surface is keyed and primed for the new finish.
- The new finish is sprayed on in several coats and left to cure until the next day.
Before we arrive
- Tell us if there are stairs or a lift
- Keep children and pets away from the room on the day
- Mention any parking restrictions or tricky access
Getting a price
For most jobs, pictures are all we need to give you a price. Tell us what happened and where you are, and we will reply with a fixed quote and the earliest dates we have.
Read more
Different materials, different repairs
Acrylic
Acrylic feels warm and is light, but it relies on good support. Repairs to cracks are reinforced from the back.
Cast iron
A cast iron bath is heavy enough that most people never want to move it. Only the enamel surface wears or chips, and that is what we repair.
Repairing versus replacing in Fewston
Replacing a cast iron bath is a big job: it’s very heavy, may need breaking up, and the replacement can be costly. Re-enamelling avoids all of it. Our bath re-enamelling starts from £350. It helps to know what pushes a price up or down: access, material, the extent of the damage and whether we can do several items together. Photos let us give you a fixed figure.
Why book with us
- Every repair guaranteed for a year
- CHAS and Constructionline accredited
- No extra charge for your area
- Colour-matched on site
Read our prices page and resurfacing vs replacement cost guide.
When a repair is not the answer
A repair isn’t always the answer, and we’ll tell you before we start. We can’t fix:
- Leaking taps or wastes (a plumber’s job)
- An acrylic bath that flexes badly underfoot
- Problems we can’t see until an old finish comes off
Not sure? Send pictures and we will give you a straight answer before booking.
What we work on
- Acrylic baths
- Pressed steel baths
- Basins & shower trays
- Victorian roll-tops
- Cast iron baths
What we’re called out for in Fewston
Hard water speeds up the wear, and abrasive cleaners do the most damage.
Send us a picture if you notice any of these:
- A bath in a colour that no longer suits
- Thin, worn enamel in places
- A dull, rough surface that won’t come clean
- Stains that will not shift
Comparing quotes
- The length of the guarantee and what it covers
- If travel is included in the price
- Whether the price is fixed and includes VAT
- How changes to the job are handled
Fewston questions
Will the bath be moved?
Not at all. Everything is done in your bathroom, with the room masked and ventilated.
Can you quote from pictures?
Normally, yes. Clear pictures let us give you a fixed price without visiting.
How long will the bath be out of use?
Usually a day, then it’s ready to use the following day. Deeply pitted baths may need a second day.
How soon can you come?
We’ll give you dates with your quote. Tell us if you need it done quickly.
Can you make a coloured bath white?
Yes. Coloured baths can be resurfaced in white, and we can do the rest of the suite as well.
Which areas do you work in?
The entire UK, including all of North Yorkshire. Send your postcode with your photos and we will offer you dates.
Is there a guarantee?
All our work carries our one-year guarantee. Ask us what it covers when you get your quote.
How durable is a resurfaced bath?
A well-prepared finish lasts a long time if it’s looked after. Avoid abrasive cleaners and suction mats.
Also in Fewston
Prices and what affects them
Prices start from £350. We don’t charge extra for travel to Fewston. The price depends on:
- Any earlier repairs that need removing first
- How many areas need work
- The type of damage
- Where the damage is and how we get to it
Rather than charging by the hour, we fix the price before we start. It depends on the damage, the material and access, and doing several items at once reduces it.
How to get a fixed quote
Before you send photos, a few simple things make all the difference:
- A close-up of the damage, in focus
- Details of any past repairs
- Natural light rather than flash
- The material, if you know it
No survey visit is needed: we price from pictures. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through.
About our accreditations · Every repair comes with a one-year guarantee.

