Coventry · England
Bath Re-enamelling in Fillongley
Bath re-enamelling for Fillongley, without a refit. Get a fixed price from your photos, then book a visit.
- Resurfacing from £350
- Staining under the taps and around the waste
- Thin, worn enamel in places
How we price bath re-enamelling
Resurfacing from £350. We price every job individually, from your pictures. The main factors are:
- What the surface is made of
- How hard the colour is to match
- Whether old repairs or coatings need taking off
- What kind of damage it is
It helps to know what pushes a price up or down: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Photos let us give you a fixed figure.
Quotes from your photos
A couple of clear pictures is all it takes. Try to include:
- Whether it’s been repaired or coated before
- Where you are, by postcode
- Any details about the material
- A wider photo showing the entire bath
Send us pictures of the damage and a wider shot of the whole item, with your CV7 postcode, and we will reply with a fixed quote.
Bath re-enamelling in Fillongley without replacing anything
Resurfacing renews the whole surface of the bath without taking anything out. It suits baths that are dull, stained, rough or chipped all over. We work on Victorian roll-tops, pressed steel baths and basins & shower trays, and common reasons people contact us are stains that won’t shift and a peeling or bubbling previous coating.
All our work comes with our one-year guarantee.
- Where
- Fillongley (CV7)
- County
- Coventry
- Cover
- 12 months on all our work
- Price
- From £350. Fixed and free, based on pictures
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
What a repair can’t fix
To be straight with you, some problems need a different fix:
- Problems we cannot see until an old finish comes off
- Leaks from fittings rather than the bath
- A cast iron or steel bath that’s cracked right through
Not sure? Send photos and we will give you a straight answer before booking.
Surfaces we repair
- Cast iron baths
- Pressed steel baths
- Acrylic baths
- Victorian roll-tops
- Basins & shower trays
How to look after the repair
So the finish stays in good condition for years:
- A quick wipe after use keeps limescale away
- Do not leave a chip unrepaired
- Rinse off hair dye, oils and bath bombs right away
- Keep suction mats out of the bath
Wait for the curing time we give you before the first bath. After that, a soft cloth and washing-up liquid is all it needs.
The longer worn enamel is left, the rougher it gets, and any rust spreads underneath. Resurfacing sooner means less repair work first.
DIY kit or professional repair?
If you do try a kit, read the instructions carefully, and do not use it until it has fully cured. If it fails, we can still put it right.
A kit can be fine for a tiny mark out of sight. For damage in plain view, cracks, holes or rust, or coloured finishes, a professional repair is worth it.
How it works
Arrival times are agreed in advance. Once we are there, the work takes most of the day. We leave the room clean and you will know when it can be used.
- We mask and protect the room and ventilate it.
- The bath is cleaned, degreased and any chips or rust repaired.
- The surface is prepared and a bonding primer applied.
- We spray several coats of new enamel finish.
- The bath is left to cure and can generally be used the day after.
Preparing for the visit
- Keep children and pets away from the room on the day
- Tell us about parking, stairs or access
- Mention any earlier repairs or resurfacing
Getting a price
There is no need for us to visit first. Photos are enough for us to price nearly every job: we need a close-up, a wider picture and your postcode, and we’ll reply with a fixed quote.
Read more
Repairing versus replacing in Fillongley
Replacing the bath means a plumber, lifting out the old bath, making good the walls and tiles and days without a bathroom. Re-enamelling gives the bath a new finish with the bath left where it is. Resurfacing from £350, with every job priced individually. Most people are surprised how affordable a repair is, especially compared with replacing and refitting. Photos let us give you the exact figure.
Why us?
- A year’s guarantee on all work
- Dust sheets down, tidy finish
- Same prices wherever you are
- Colour-matched on site
See our full price list and bath cost comparison.
Towns and villages near Fillongley
Also in Fillongley
FAQs for Fillongley
I’m a tenant. Can you help?
Yes. Check with your landlord; we can send the quote to them too.
Do I have to be there?
Yes. We need access to the room while we work, at a time we agree with you.
Can I get a quote without a visit?
Normally, yes. A close-up and a wider photo are enough to give a fixed quote.
Are you accredited?
Yes. Our accreditations include CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.
Is it OK to have pets in the house?
Please keep children and pets out of the room during the visit. The rest of the house is unaffected.
What happens next?
We look at the photos and reply with a fixed price and some dates. If anything’s unclear, we will ask for another photo.
Do you cover Fillongley?
Yes. We work across the UK and travel to Fillongley and the rest of Coventry. Send photos and we will quote, or call 0345 017 0787.
Do you resurface freestanding baths?
Yes. We can do the inside and outside if you’d like.
What your bath is made of matters
Cast iron
Cast iron baths are the classic candidate for re-enamelling. The body lasts for generations; only the enamel wears, so a new finish makes them look new again.
Roll-top and period baths
Freestanding roll-tops can be done inside and out, with the outside refinished as well.
Fillongley and the surrounding area
Fillongley is about 4 miles west of Bedworth, in Coventry. Jobs in Fillongley are booked in like any other job: a fixed quote from your pictures, then a visit to do the work. We work in all 88 towns and villages in Coventry, from the larger towns to small villages. Our nearest city page is Birmingham, about 13 miles away.
Our visits in CV7 work the same way as everywhere else we cover. Local streets include Church Lane, St Mary's Road and Holbeche Crescent, and we cover them all. Fillongley sits on or near the B4098, which makes travel easy. If you are just outside Fillongley, we cover Red Hill (1 mile south-east), Wood End (1 mile north-east), Corley Ash (1 mile south-east), Corley Moor (1 mile south) and Corley (2 miles south-east). Larger places within reach include Coventry (6 miles south-east), Hillfields (6 miles south-east), Bishopsgate Green (6 miles south-east), Radford (5 miles south-east), Ernesford Grange (8 miles south-east) and Foleshill (6 miles south-east).
What’s near Fillongley
Our customers here include homes close to Bournebrook CofE Primary School, Butchers Public House and Church of St Mary and All Saints and the streets around them. Fillongley’s nearest station is Coventry Arena station, about 4.6 miles south-east. A little further out are George Eliot Hospital (5.1 miles east) and Maxstoke Castle (3.8 miles west).
Landlord and trade work in Fillongley
Rental properties take more wear, and replacing things at every changeover adds up. Repairing between tenants keeps the property presentable for less.
We work for landlords, letting agents and housing providers in Fillongley as well as homeowners. Repairing between tenancies keeps void periods short, and it generally costs far less than a refit.
About our accreditations · Every repair comes with a one-year guarantee.
